Finding the right Audi A3 phone mount depends mostly on which generation you drive. The current 2021-2026 A3 has a completely different dash and vent layout than the 2014-2020 cars, and a mount custom molded for one will not sit flush in the other. Below are two custom vent mounts (also sold as phone holders) for each generation, plus a universal cup holder option that works across every A3 model year regardless of trim or interior color.
| Mount | Best For | Years / Trim |
|---|---|---|
| LUNQIN Vent Mount | Current-generation A3 owners who want a clamp grip instead of magnets | 2021-2026 A3 |
| MaserWeller Vent Mount (MagSafe) | Current-generation A3 with a factory MagSafe case | 2021-2026 A3 |
| AOUKKL Vent Mount | Prior-generation A3 owners who want a clamp grip instead of magnets | 2014-2020 A3 |
| MaserWeller Vent Mount (MagSafe) | Prior-generation A3 owners who prefer a magnetic head | 2014-2020 A3 |
| APPS2Car Magnetic Cup Holder Mount | Any A3 generation, or drivers who do not want anything near the vents | All years, universal |
LUNQIN Vent Mount for 2021-2026 Audi A3
For current-generation A3 owners who would rather grip the phone with a cradle than rely on magnets, the LUNQIN mount is molded specifically for the facelifted 2021-2026 dash. It mounts in the center vent cluster without blocking airflow through the fins, and the cradle arms open and close around the phone with one hand, which is useful for anyone switching between a phone and a mounted tablet or a case that changes thickness season to season.
The mount rotates a full 360 degrees once installed, so it works equally well in portrait for navigation apps or landscape for video calls at a stop. Because it grips the phone directly rather than through a magnetic plate, it also works with any phone regardless of MagSafe compatibility, which makes it a safer default pick for households where the A3 gets shared between an iPhone and an Android device.
MaserWeller MagSafe Vent Mount for 2021-2026 Audi A3
The current-generation A3 rides on Audi’s MLB Evo platform and shares its facelifted dash with the S3 and RS3, so a mount needs to be shaped for that specific vent cluster to sit flush. This MaserWeller mount is 3D scanned to that dash and clips between the center vents without pinching the fins closed, so airflow is not blocked. The head uses embedded magnets built to MagSafe strength, so an iPhone with a MagSafe case snaps on and stays put through normal driving. For phones without MagSafe, Audi A3 owners typically add a thin magnetic plate behind the case.
Installation is tool-free: the bracket presses into place using the vent’s own fins for tension, so nothing is drilled or glued to the dash. The ball head gives a wide range of viewing angles, though once you land on a position it holds firm rather than staying loose for constant readjustment, which some drivers prefer for a mount that will not drift over bumps.
AOUKKL Vent Mount for 2014-2020 Audi A3
Owners of the 2014-2020 A3 need a different shape entirely, since the earlier dash uses a narrower vent cluster than the current car. The AOUKKL mount is built specifically for that 2014-2020 layout and uses a clamp-style cradle rather than magnets, which is worth considering if you run a thick case, a battery case, or simply prefer not to deal with metal plates. The cradle opens wide enough for most phones between 4.7 and 7 inches, so it covers everything from a compact iPhone to a larger Android device without swapping hardware.
Like the MaserWeller option, it clips into the vent fins without drilling or adhesive, and the head rotates a full 360 degrees for portrait or landscape viewing. It is a solid pick if your priority is a secure grip over a case of any thickness rather than a magnetic connection.
MaserWeller MagSafe Vent Mount for 2014-2020 Audi A3
If you drive the 2014-2020 A3 and want a MagSafe-style magnetic head instead of a clamp, MaserWeller makes the same vent-mount design in a shape scanned for the earlier dash. It shares the same non-restrictive vent clip as its newer sibling, so airflow through the vent is unaffected, and the magnetic head lets you dock and remove an iPhone in one motion instead of squeezing it into a cradle. This is the better match for anyone upgrading to a MagSafe case and wanting a car mount that matches it, while the AOUKKL above remains the better match for anyone still running a heavier protective case.
APPS2Car Magnetic Cup Holder Mount (Universal, All Years)
Not every A3 owner wants a bracket living in the vents, whether that is because of a specific trim’s vent shape, a lease that discourages any dash modification, or simply a preference for keeping the factory vents untouched. The APPS2Car cup holder mount sidesteps that entirely by clamping into the center console cup holder instead. Its base expands to fit cup holders between 3 and 4 inches, which covers the A3’s console across both generations, and an aluminum telescoping arm extends up toward the driver for a usable viewing height.
The head uses dual-ring N55 magnets built to MagSafe strength on a 20mm ball joint, so it holds an iPhone in a MagSafe case and swivels freely between portrait and landscape. Because it never touches the dash or vents, it is also the easiest option to move between cars if you drive more than one Audi or want to bring the mount along when the A3 is traded in.
How to Choose the Right Audi A3 Phone Mount or Phone Holder
The first step in picking an Audi A3 phone mount is identifying which generation you own, since the two dashes are not interchangeable. The 2021-2026 cars have the facelifted center stack with the larger touchscreen setup, while 2014-2020 cars use the older, narrower vent cluster. The A3 saw a mid-cycle refresh in 2021 that changed the vent shape, the climate control layout, and the overall dash trim, so even owners who know their car well should double-check fitment rather than assume both generations share hardware. Audi’s own site or your window sticker will confirm the model year if you are not certain, and matching that year range to the mount’s listed fitment is the single most important factor before buying.
Trim level matters less than generation for fitment purposes. A base A3, the sportier S3, and the high-performance RS3 all share the same dash and vent tooling within a given generation, so a mount listed for “A3 S3 RS3” fits all three regardless of engine or trim badge. Where trim does matter is screen size: RS3 models sometimes ship with a larger optional display, which can change how much clearance exists around a vent-mounted phone, so drivers of higher trims may prefer the cup holder option below if a vent mount feels tight against the screen bezel.
From there, the decision usually comes down to magnetic versus clamp-style holding, and each generation now has one of each. MagSafe mounts are faster to use one-handed and keep the dash cleaner since there is no cradle arm blocking the screen, but they require either a MagSafe case or an added metal plate for phones that lack the magnet ring. Clamp-style mounts like the LUNQIN and AOUKKL work with any case, including bulky battery packs or rugged cases, and with any phone regardless of MagSafe support, without needing an adapter.
Finally, consider where you want the phone positioned day to day. A vent mount sits higher and closer to eye level, which many drivers find safer for glancing at navigation, while a cup holder mount sits lower and is better suited to drivers who primarily use their phone for music or calls rather than turn-by-turn directions.
Frequently Asked Questions
Is an Audi A3 phone mount the same thing as a phone holder?
Yes. “Phone mount” and “phone holder” describe the same product and are used interchangeably by both shoppers and manufacturers. Some listings use one term, some use the other, and a few use both in the title, but the fitment and function are identical.
Does the Audi A3 have wireless Apple CarPlay?
The current 2021-2026 A3 offers wireless Apple CarPlay and Android Auto as standard equipment. Earlier 2014-2020 cars received wireless CarPlay only in later model years, so a phone mount remains useful even with CarPlay active for glancing at notifications or using apps CarPlay does not mirror.
How do I know which A3 generation I have?
The 2021-2026 A3 uses Audi’s facelifted design with a larger, more upright touchscreen and revised vent cluster. The 2014-2020 A3 has a smaller screen and a narrower center vent layout. Checking your build year against Audi’s official specifications will confirm which mount fits.
Will a vent mount block the A3’s air vents?
No. The LUNQIN, MaserWeller, and AOUKKL mounts are all shaped to sit between the vent fins rather than across them, so airflow is not restricted.
Do I need a MagSafe case for the magnetic mounts?
A MagSafe case gives the strongest and most reliable hold. Phones without MagSafe can still use these mounts with an added thin metal plate behind the case, though the magnetic connection will be less secure than a native MagSafe case.
What if I do not want anything touching my A3’s vents?
The APPS2Car cup holder mount is the better choice, since it clamps into the center console instead of the dash and works identically across both A3 generations.
Can I use the same mount if I switch phones later?
Yes, in most cases. Magnetic mounts work with any phone that has a MagSafe case or a thin metal plate attached, so switching from an iPhone to a different MagSafe-compatible phone requires no hardware change. Clamp-style mounts like the LUNQIN and AOUKKL simply need to open wide enough for the new phone’s width, which covers most phones between 4.7 and 7 inches regardless of operating system.
