Best Indoor Security Camera Mounts

Indoor security cameras are easy to set up out of the box, but getting them mounted correctly is where most people run into problems. The included stand works fine for a shelf or table. It does not work for a corner, a high wall position, an outlet location, or anywhere a cable needs to be hidden. And a camera placed in the wrong spot can miss key activity, suffer from glare, or end up far less useful than the camera itself is capable of being.

This guide covers the best universal indoor security camera mounts across every mounting type: adhesive shelf mounts, corner shelf mounts, outlet shelves, wall brackets, and flexible clamp mounts. These options work across the major camera brands including Wyze, Ring, Blink, eufy, Google Nest, Arlo, Tapo, and Reolink, provided your camera sits on a flat base or has a 1/4-20 threaded hole.

Quick Comparison: Best Indoor Security Camera Mounts

Mount	Best For	Install Type
Brainwavz Mini Corner Shelf	Best Corner Placement / No Drill	Adhesive (3M VHB)
Brainwavz W01 Flat Shelf	Best Flat Wall Shelf	Adhesive or Screw
Outlet Shelf Mount	Best Clean / No Cable Run	Outlet Cover Replacement
UYODM Adjustable Wall Bracket	Best Permanent Wall Mount	Screw (1/4-20 thread)
Holicfun Clip Clamp Mount	Best Flexible / No-Drill Clamp	Clamp (no drill)

Start With Placement, Then Choose the Mount

Before choosing any mount, decide where the camera should go. This is the most overlooked step and the main reason indoor cameras underperform. The goal is not just to see a room — it is to capture entry points, movement paths, and the areas where activity actually happens.

The most effective indoor camera positions are high room corners, above entry doors, facing the main activity area from across the room, and near the ceiling line where obstructions are minimal. A camera placed in a corner at ceiling height covers more of a room than a camera placed at eye level on a shelf, and it is significantly harder to tamper with or block.

A properly placed camera with a basic mount will always outperform a perfectly mounted camera in the wrong location. Get the position right first, then choose the mount that supports it.

Tip: Before installing anything permanently, test the camera angle using your app’s live view. Walk through the space and confirm the coverage area matches what you actually want to monitor. Adjusting an adhesive mount position after it has cured is much harder than testing first.

Best Corner Shelf (No Drill): Brainwavz Mini Corner Shelf

The Brainwavz Mini Corner Shelf is the best option for the most effective indoor camera position — a high room corner. It is an L-shaped shelf that sits in the 90-degree junction where two walls meet, using 3M VHB adhesive tape to stick to both wall surfaces simultaneously. No drilling, no screws, no tools required. The camera sits on the shelf platform and points diagonally across the room, which is the widest coverage angle available from any single camera position.

The shelf measures 5.2 inches wide by 4.2 inches deep, which accommodates most compact indoor cameras including Wyze Cam, Blink Mini, Ring Indoor Cam, eufy Indoor Cam, Google Nest Cam, and similar-sized models. The raised edge around the platform prevents the camera from sliding off, and the pre-attached 3M VHB tape bonds to painted drywall, wood, tile, and most smooth surfaces.

Note: Brainwavz specifically warns against installing on painted, damp, or plastered walls as the adhesive may pull the paint or plaster off on removal. For painted drywall, test a small area first or use the screw-in option on the W01 flat shelf below.

View Brainwavz Mini Corner Shelf on Amazon

Best Flat Wall Shelf: Brainwavz W01

For positions where a corner shelf is not available, the Brainwavz W01 is a small flat shelf that mounts to any wall surface using either 3M VHB adhesive or screws. The two-way installation option is the key advantage here over adhesive-only shelves — if you are installing on a painted surface and want a more permanent hold without the paint-pulling risk, the screw-in option gives you that without requiring a different product.

The shelf is universal and works with any camera that sits on a flat base. It does not require a 1/4-20 thread — the camera simply sits on the platform. A cable management hole in the back lets the power cable pass through cleanly rather than hanging loose below the shelf.

The caveat mentioned in the previous recommendation applies here to when it comes to mounting to a wall using the adhesive.

View Brainwavz W01 Shelf on Amazon

Best Clean Setup: Outlet Shelf Mount

The outlet shelf replaces your existing wall outlet cover plate with one that includes a small platform on top. The camera sits on the shelf with its power cable running directly into the outlet below, eliminating any visible cable run up the wall. The result is a clean, integrated-looking setup that requires only the existing outlet screws and takes under five minutes to install.

This works best in kitchens, hallways, living rooms, and garages where outlets are already positioned at a useful height. The camera position will be lower than a corner or ceiling shelf, but for rooms where mid-wall coverage is adequate, this is the most cable-free and visually clean setup available. It is also the best option for renters since it leaves no marks and the original cover goes right back on when you move out.

Note: The outlet shelf replaces a standard single or duplex outlet cover plate. It is not compatible with GFCI outlets, USB outlets, or combination switch and outlet plates. Check your outlet type before ordering.

View Outlet Shelf Mount on Amazon

Best Permanent Wall Mount: UYODM Adjustable Wall Bracket

For a permanent installation where stability matters most, the UYODM wall bracket screws directly into the wall and provides a fully adjustable 360-degree rotating mount via the 1/4-20 threaded connection. It comes as a two-pack, which makes it practical for multi-camera setups. The bracket extends the camera out from the wall surface far enough to allow a full range of angle adjustment without the camera base hitting the wall.

This is the most stable indoor mounting option available for cameras with a 1/4-20 thread. It works for both flat wall and ceiling installations, and the screw-in base means there is no risk of the mount shifting or dropping over time. For high-traffic areas, entry points, and any position where you never want to adjust the camera again, this is the right pick.

View UYODM Wall Bracket on Amazon

Best Flexible Clamp Mount: Holicfun Clip Clamp

The Holicfun clip clamp mount takes a completely different approach from all of the above. Instead of attaching to a wall, it uses a spring-loaded clamp that grips any surface up to 1.6 inches thick — a shelf edge, a cabinet door, a bookcase, a railing, a door frame, or any similar structure. The 5.9-inch gooseneck arm bends to any position and stays put, giving you precise control over the camera angle without any wall contact at all.

This is the most flexible positioning option in the lineup and the best choice for renters, for temporary setups, or for locations where wall mounting is simply not viable. The 1/4-20 thread connection is compatible with most indoor cameras, and Blink adapters are included for Blink cameras that use a proprietary attachment. It works indoors and outdoors, and can be moved to a completely different location in seconds.

View Holicfun Clip Clamp Mount on Amazon

Common Indoor Mounting Problems and Fixes

Problem	Cause	Fix
Glare or washed-out footage	Camera facing a window or bright light	Reposition away from direct light sources
Limited field of view	Camera placed too low	Move to a corner shelf or higher wall position
Camera knocked out of position	Unstable surface or tabletop placement	Use a shelf mount or permanent wall bracket
Messy cable run	No cable management in mount design	Use outlet shelf or shelf with cable hole
No viable wall or corner location	Room layout or renter restrictions	Use Holicfun clamp on a shelf or furniture

Frequently Asked Questions

Do I need a 1/4-20 thread on my camera to use these mounts?
Not for all of them. The Brainwavz corner and flat shelves and the outlet shelf work with any camera that sits on a flat base — no thread required. The UYODM bracket and Holicfun clamp both use the 1/4-20 thread connection. Check your camera’s specifications to confirm which connection method it uses.

Will 3M VHB adhesive damage my walls?
On unpainted surfaces like tile, wood, or glass, VHB adhesive removes cleanly. On painted drywall, there is a risk of pulling paint on removal, particularly if the adhesive has been in place for a long time. For painted surfaces, use the screw-in option on the Brainwavz W01, or test the adhesive on an inconspicuous area first.

What is the best mount for a renter?
The outlet shelf is the cleanest option since it uses existing outlet screws and leaves no marks. The Holicfun clamp is the most flexible no-mark option for locations where there is no suitable outlet. Adhesive shelves work but carry paint-pulling risk on removal.

Can I use these mounts for ceiling installation?
The UYODM wall bracket can be ceiling-mounted since it uses a standard screw installation and 360-degree rotation. The shelf mounts are designed for walls. Ceiling mounting with adhesive is not recommended since the weight of the camera pulls directly against the bond over time.

Which mount works best in a room corner?
The Brainwavz Mini Corner Shelf is specifically designed for this position. It is the only mount in this lineup that uses the two-wall corner junction as its attachment point, which gives you both the best camera angle and the most stable adhesive hold since it bonds to two surfaces simultaneously.

Do these mounts work with Blink Mini cameras?
The Brainwavz shelf mounts and the outlet shelf work with Blink Mini since the camera sits on a flat base. The Holicfun clamp includes Blink adapters specifically. The UYODM bracket works if your Blink model has a 1/4-20 thread — check your specific model’s specifications.

Best Indoor Security Camera Mounts: Corner, Shelf and No-Drill Options