The 2025 and 2026 Acura ADX is the brand’s smallest and newest SUV, and it shares its design elements with the Honda HR-V and the Acura Integra. If you have spent any time with an Acura Integra phone mount setup, the ADX will feel familiar in one frustrating way: the vents. Finding the right Acura ADX phone mount means working around a honeycomb vent design that blocks most standard vent clips, so we tested custom-fit screen mounts, universal suction mounts, and a cup holder option to figure out what holds up.
Below you will find two mounts custom-built for the ADX’s infotainment screen, two universal suction options for the dash and windshield, and a cup holder mount for anyone who would rather keep the screen area clear. We skipped vent mounts entirely for this vehicle, and we explain why further down. If you are shopping across the rest of the Acura lineup or the ADX’s Honda cousin, see our guides to the Acura MDX, the Acura RDX, and the Honda HR-V, which the ADX shares its platform with.
Best Acura ADX Phone Mount Comparison
| Mount | Best For | Years/Trim |
|---|---|---|
| Masergogo Screen Clip Mount | Custom fit, budget option | Acura ADX |
| MaserWeller MagSafe Screen Clip Mount | Custom fit, MagSafe users | Acura ADX |
| VICSEED MagSafe Suction Mount | Strongest hold, MagSafe users | Acura ADX |
| iOttie Easy One Touch Advanced | Non-MagSafe phones, easy in and out | Acura ADX |
| WeatherTech CupFone | Keeping the dash and screen clear | Acura ADX |
Why no vent mount here: The ADX inherits the same honeycomb vent covering we ran into on the Acura Integra. The mesh pattern gives a vent clip nothing solid to grip, so any vent mount you try is going to sag, spin, or pop loose within a day. We would rather point you toward mounts that hold securely than sell you something that looks good in a photo and fails on the first pothole.
Custom Acura ADX Phone Holder Options
These custom Acura ADX phone holders attach to the edge of the 9-inch infotainment screen with an adhesive base, which keeps the mount low, stable, and out of your sightline. Both of the mounts below are built specifically for the ADX’s screen dimensions and share the same shell as the Integra and Integra Type S mounts, since all three vehicles use the same touchscreen housing. Neither one is a tool-free clamp, so plan on a short cure time before the mount is ready for daily use.
Masergogo Screen Clip Mount
This is a secure, custom Acura ADX phone mount that attaches with an adhesive base rather than a mechanical clamp. You peel off the backing film, press the base firmly onto the screen frame for about 30 seconds, then give it 24 hours to fully cure before loading it up with your phone. Once it is set, the arm holds a quick-release cradle with a one-touch button, so mounting and removing your phone takes about half a second.
The cradle is a fixed clip rather than a magnetic system, which means it holds any phone, with or without a case, as long as it fits within the 7 to 9 inch screen bracket range. It sits low enough that it does not block your view of the touchscreen controls, and because it attaches to the screen frame instead of the vent, it sidesteps the honeycomb vent problem entirely.
MaserWeller MagSafe Screen Clip Mount
Should you be using a MagSafe-enabled device or if your phone is equipped with a magnetic case, this mount employs the very same adhesive-based mounting system as the Masergogo mount but replaces the cradle with a magnetic base that incorporates 20 N55 magnets. The arm in question is made of aluminum alloy as opposed to plastic and feels more robust. As always, you will have to remove the backing film and mount the base on a clean and dry surface of the frame in order for it to cure for 24 hours before it can be used on a daily basis.
Universal Acura ADX Phone Mount Options
Should you prefer not to clip anything to the bezel of the screen, the next best option is a windshield or dash-mounted suction cup. The ADX has a relatively steep windshield with a relatively flat dash pad right at the bottom of the glass, allowing a great deal of surface area for the suction cup to stick to.
Be sure to clean the surface of the windshield or dash with some window cleaner or alcohol prior to installing the mount and allow a few moments for the gel pad to properly adhere to the surface before you adjust the arm to your desired position. The most common cause of a suction mount drooping down the windshield after a few days of summer sun is a rush job installation.
Important to remember to not block your view of the road if attaching to the windshield. It’s also worth ensuring that windshield attachment is legal in your state because several ban it completely.
VICSEED 2026 Upgraded MagSafe Suction Mount
This is the strongest holding suction mount we tested for the ADX, rated for well over 100 pounds of suction force and built around a MagSafe compatible magnetic plate. The base folds down to roughly half its size when not in use, and the arm rotates a full 360 degrees with 210 degrees of additional folding adjustment, so you can angle the screen toward the driver or passenger seat depending on who needs the navigation view. It is a strong Acura ADX MagSafe mount pick for anyone who wants a phone that snaps on and off in one motion.
iOttie Easy One Touch Advanced
For drivers without MagSafe, the Easy One Touch Advanced is the more practical choice. The cradle opens and closes with one hand, the telescopic arm extends from 5 to nearly 7 inches, and the arm pivots 260 degrees, which is enough range to clear the ADX’s dash controls. A built-in cord management channel keeps a charging cable from dangling across the console, and the wider cradle opening fits phones in thicker cases without any adapter.
Acura ADX Cup Holder Phone Mount Option
The ADX uses a standard twin cup holder layout in the center console, similar to what you would find in the Integra and HR-V, which means a cup holder base mount is a legitimate option here. It is a good route if you want to keep the screen bezel and dash completely clear.
WeatherTech CupFone
The CupFone drops into either cup holder and expands to lock in place, giving you an adjustable gooseneck arm that swings the phone toward the driver. It works well in the ADX’s front console cup holders and leaves you with a free cup holder for a drink, since most drivers only need one holder for the mount. This is the same CupFone we have used across other vehicle guides on the site, and it holds up the same way here: sturdy, no wobble, and easy to pull out entirely if you need both cup holders back for a road trip.
How to Choose the Right Acura ADX Phone Mount
Start with whether you use MagSafe. If you run an iPhone with a MagSafe case or a magnetic ring adapter, the MaserWeller screen clip or the VICSEED suction mount will give you a one-motion attach and a cleaner look, since there is no cradle arms clamping around your phone. If you do not use MagSafe, the Masergogo clip and the iOttie Easy One Touch Advanced both use a physical cradle that works with any phone regardless of case thickness.
Next, think about where you want the mount sitting. An adhesive screen-frame mount keeps the phone low and close to the existing touchscreen, which some drivers prefer because it does not add anything new to the windshield. A suction mount on the glass sits higher and closer to eye level, which some drivers find easier to glance at without looking away from the road as much. Either position works in the ADX since both the screen frame and the windshield base are accessible and unobstructed. Keep in mind the adhesive mounts are semi-permanent once cured, while the suction mounts can be repositioned or removed anytime.
If neither of those appeals to you, the cup holder route is worth a look. It is the only option here that adds zero hardware to the dash or screen, and the ADX’s console cup holders are a normal enough shape that the CupFone seats securely.
One more thing worth planning around: the ADX has a Qi-compatible wireless charging pad in the console, but like most cars, it only powers up while the ignition is on, so it is not a place to leave your phone charging while the vehicle is parked and off. Treat it as a driving-only charger. If you want your phone charging while it is in the mount, look for a MagSafe puck accessory that pairs with the VICSEED or MaserWeller magnetic plates rather than trying to run a cable to the windshield or screen bezel.
Acura ADX Phone Mount FAQ
Will a vent mount work in the Acura ADX?
Not reliably. The ADX uses the same honeycomb mesh vent covering found on the Acura Integra, and there is no solid vane structure for a standard vent clip to grab onto. Skip the vent mounts and use a screen clip, suction mount, or cup holder mount instead.
Does the ADX have wireless charging built in, and will a mount interfere with it?
The ADX comes with a wireless charging pad in the console, separate from the mounting locations covered here. None of the mounts above sit on or block that pad, so you can still use it for a second device or when your primary phone is in the mount.
Do the custom screen clip mounts fit every ADX trim?
Yes. Every ADX trim uses the same 9-inch infotainment screen and bezel, so the Masergogo and MaserWeller mounts fit the base, A-Spec, and Advance trims the same way.
Can I use a magnetic mount without a MagSafe case?
The VICSEED and MaserWeller mounts both include a metal plate that can be added to a non-MagSafe case or phone if you do not already have magnetic hardware, though a native MagSafe case or ring will hold more securely over time.
