If you drive a Buick Encore GX and have gone looking for a phone mount, you have probably run into the same wall Envista owners hit. The current generation dashboard is built around a wide combined display, and that leaves almost nowhere flat to anchor a traditional mount. Finding the right Buick Encore GX phone mount depends heavily on which generation you own, since the custom-scanned options that fit the older 2020-2023 dashboard, will not work in the redesigned 2024-2026 cabin.
Below we cover what is available for each generation, plus two universal options that work across every model year regardless of dash layout. If you are shopping for a different Buick in the family, our Buick Enclave phone mount guide and Buick Envision phone mount guide cover those cabins in detail.
Why the Encore GX Dash Also Squeezes Out Phone Mounts
Buick redesigned the Encore GX for 2024 with a wide 11-inch display that dominates the center of the dash, the same design language driving the fitment problem in the Envista. That leaves less flat surface for adhesive-based mounts and makes generic dashboard hardware a poor fit for this cabin. Unlike the Envista though, most mount manufacturers have not yet caught up with a custom scan for the redesigned 2024-2026 dash. The earlier 2020-2023 body style used a smaller, more separated screen layout with more usable trim around it.
If you own a 2020-2023 Encore GX, that works in your favor since two solid custom mounts exist for your exact dash. If you own a 2024-2026 model, your best bet right now is a custom mount from ProClip, which builds dash mounts to order for the redesigned dash rather than relying on a mass-produced scan.
Comparison: Best Buick Encore GX Phone Mounts
| Mount | Best For | Years/Trim |
|---|---|---|
| ProClip Custom Dash Mount | 2024-2026 owners wanting eye-level placement | 2024-2026, all trims |
| MaserWeller Custom Dash Mount | 2020-2023 owners wanting MagSafe | 2020-2023, all trims |
| Masergogo Custom Dash Mount | 2020-2023 owners wanting a clamp grip | 2020-2023, all trims |
| eSamcore Cup Holder Mount | Any year, zero dash contact | 2020+, all trims |
| A2C Magnetic Vent Mount | Any year, budget backup | 2020+, all trims |
If You Have a 2024-2026 Encore GX: Go Custom Through ProClip
A company named ProClip is currently the most reliable path to a true custom fit if you drive the current-generation Encore GX. Their dash mount clips into the factory seam below the center display and is built specifically to the 2024 and newer dashboard contour, the same approach the Envista mounts use on that vehicle. You will need to pair the base with a separate device holder, which ProClip sells alongside it, so the total setup involves two purchases rather than one all-in-one unit.
We will update this section the moment another acceptible option becomes available for the 2024-2026 dash.
MaserWeller Custom Dash Mount: Best for 2020-2023 Encore GX Owners
This mount is scanned specifically to the earlier Encore GX dashboard and clips into a factory seam rather than relying on adhesive. It uses a magnetic head compatible with MagSafe cases and a metal ring for other phones, and it rotates a full 360 degrees so you can switch between portrait and landscape without repositioning the base. Because it targets the 2020-2023 body style specifically, it will not fit the redesigned 2024 and newer dash, so confirm your model year before ordering.
Masergogo Custom Dash Mount: Best Alternative for 2020-2023
If you would rather use a mechanical clamp than a magnetic mount, the Masergogo option covers the same 2020-2023 dashboard with a different holding mechanism. The clamp grip works well for thicker cases and heavier phones that might test a magnetic connection, and the mount still clips into the factory seam without any adhesive. Like the MaserWeller mount, this one is built for the earlier Encore GX generation only.
eSamcore Cup Holder Mount: Best Universal Option Across Model Years
Because it mounts in the cup holder rather than the dashboard, this option works identically whether you drive a 2020 or a 2026 Encore GX. The base twists to expand and lock into the cup holder without adhesive, then extends a 15-inch arm up toward the driver for a better viewing angle than a typical cup holder mount offers. It will not match the eye-level placement of a true custom dash mount, but it sidesteps the dashboard fitment problem entirely and works the same way regardless of which generation you own.
A2C Magnetic Vent Mount: Best Budget Backup
The A2C vent mount clips onto the vent blades and holds the phone with a magnetic plate, requiring no adhesive and taking seconds to install. It is a reasonable fallback for either Encore GX generation, though the vent placement sits lower and further from the driver’s sightline than a dash mount or even the cup holder option above. It also works well as a spare for a second vehicle since it is not tied to any specific dashboard scan.
Installing a Custom Dash Mount the Right Way
Whether you go with a custom option for the 2020-2023 dash or a ProClip mount for the 2024-2026 dash, the installation process is similar. Both rely on a clip that seats into a seam along the dashboard rather than an adhesive pad, so start by cleaning the seam area with a dry microfiber cloth to remove any dust that could keep the clip from seating fully. Press the base in gradually along the length of the clip instead of forcing one end in first, then give it a firm tug once seated to confirm it holds under pressure.
If you ever need to remove the mount, work the clip back out from the same end you started the installation rather than pulling straight up from the middle. None of these mounts use adhesive, so there is no residue left on the trim afterward, which is worth knowing if you plan to sell or return a leased vehicle down the road.
A Quick Note on Encore GX Model Years
The Encore GX name has stayed the same since 2020, but Buick treated the 2024 refresh as a significant enough redesign that the dashboard, infotainment layout, and interior trim changed substantially from the outgoing model. This is different from a typical mid-cycle refresh where only exterior styling or trim packages shift, which is part of why mount manufacturers treat the two dashboards as separate products rather than assuming one scan covers the whole model run.
If you are shopping for a used Encore GX and comparing years, keep this dashboard change in mind since it affects more than just which phone mount will fit. Wireless charging availability, USB port placement, and even the shape of the center console storage bin also shifted between the two generations.
Which Buick Encore GX Phone Mount Should You Choose
If you drive a 2020-2023 Encore GX, the MaserWeller or Masergogo custom mount is the clear choice since both are scanned to your exact dashboard and clip in without adhesive. If you drive a 2024-2026 Encore GX, ProClip is currently your best route to a true custom fit. Owners of either generation who would rather avoid dashboard hardware altogether can lean on the eSamcore cup holder mount, and the A2C vent mount remains a solid budget backup or second-vehicle option regardless of model year.
Common Questions About Encore GX Phone Mounts
Will a ProClip mount fit as well as the MaserWeller or Masergogo mounts fit the older dash?
Yes. ProClip uses the same custom-scan approach, purchased through their website directly.
Can I use the eSamcore cup holder mount on either Encore GX generation?
Yes. Since it mounts in the cup holder rather than the dashboard, it works identically across both generations and is not affected by the redesigned display.
Is the A2C vent mount strong enough for a heavier phone?
It holds most phones securely, but as with any vent mount, a heavier phone in a thick case will put more strain on the vent fins over time than a dash or cup holder mount would.
How do I tell whether my Encore GX has the older or redesigned dashboard?
The redesigned 2024 and newer dash uses a single wide display panel spanning the driver cluster and infotainment screen, while the 2020-2023 dash has two visually separated screens set into distinct housings. If you are still unsure, your model year is listed on the vehicle registration and on a sticker inside the driver-side door jamb.
