The Buick Envision has a clean, well-organized interior, but that refinement comes with a trade-off: the center stack leaves very little room for a generic vent clip or suction cup mount to sit in a useful position. The good news is that the aftermarket has caught up. There are now custom-fit mounts designed around the Envision’s specific dash layout for both the original generation and the current second-gen model, and they install in seconds without drilling, adhesive, or any permanent modification to the interior.
This guide covers the best phone mounts for every Buick Envision from 2016 through 2026. The two generations have different interiors, so if you own a first-gen (2016-2020) or a second-gen (2021 and newer), you will need a different mount. We break down the best pick for each, and include a universal option that works on any year or trim if you want to keep things simple.
Quick Comparison: Best Buick Envision Phone Mounts
| Mount | Best For | Years / Trim |
|---|---|---|
| MaserWeller Custom Mount (MagSafe) | Best custom fit for second-gen refresh | 2024-2025 Envision (30-inch screen only) |
| Masergogo Custom Mount | Best custom fit for second-gen original interior | 2021-2023 Buick Envision |
| Andobil Air Vent Mount | Best universal option, all years and trims | 2016-2026, all trims |
Understanding the Two Generations
The Buick Envision went through a complete redesign for the 2021 model year. The first generation ran from 2016 through 2020 on a different platform, with a more traditional center stack and conventional horizontal vents flanking the infotainment screen. The second generation launched for 2021 on an updated platform shared with the Cadillac XT4, with a cleaner interior layout and a repositioned climate control arrangement. A mid-cycle refresh for 2024 brought a wider infotainment screen, a column-mounted gear selector, and revised dash trim.
What this means for phone mounts: a mount designed for the 2021-2023 interior will not fit the 2024 and newer dash correctly, and neither generation shares enough interior architecture with the first-gen to allow cross-compatibility. Custom-fit mounts for this vehicle are year-range specific, so confirming your exact model year before purchasing is the single most important step.
MaserWeller Custom Mount for 2024-2026 Buick Envision
The MaserWeller mount was developed specifically for the post-refresh Envision interior. The base is machined from aluminum and uses the 30-inch panoramic screen’s fixed edge as an anchor point, positioning your phone directly alongside the display without contacting any air vents or blocking the screen itself. Installation takes under a minute: the clip slides onto the screen surround and locks into place, no tools needed and no adhesive required. It comes out just as quickly if you want to remove it.
The mounting head uses 20 N55-grade magnets, which gives it MagSafe compatibility for iPhone 12 and newer. Non-MagSafe phones are covered through an included metal adhesive ring that you attach to the back of your case. The head rotates 360 degrees, so portrait and landscape both work depending on whether you are navigating or streaming audio. Because it is anchored to a fixed point on the screen surround rather than clipped to a vent blade, it does not flex or drift over bumps the way vent-clip mounts tend to.
Masergogo Custom Mount for 2021-2023 Buick Envision
For the original second-generation interior, the Masergogo mount is built around the 2021-2023 Envision’s specific vent and dash architecture. The base clips directly into the center console area without using the vent blades as the anchor, which matters here because the Envision’s vents are positioned at an angle that makes generic vent clips prone to lateral movement. By using a fixed console anchor instead, the Masergogo holds more rigidly over uneven roads.
The cradle side is a gravity-assisted auto-lock design: slide your phone in and the arms clamp automatically, no buttons or levers involved. One-handed operation works cleanly in both directions, which matters when you are pulling the phone out at a stop. The head has 360-degree rotation, accommodating phone sizes from 4.0 to 7.2 inches, which covers every current iPhone and Android flagship with or without a case. The elevated mount position keeps your phone at eye level rather than requiring you to glance down at the vent area.
This mount fits the 2021, 2022, and 2023 model years. If you have a 2024 or newer Envision, you need the MaserWeller option listed above. If you have a 2016-2020 first-gen Envision, the Andobil universal below is the more practical choice since there are fewer custom-fit options for the older interior on Amazon.
Andobil Air Vent Mount: Universal Option for All Years
If you own a first-generation Envision (2016-2020), or if you want a mount that moves between vehicles, the Andobil air vent mount is the right call. The Envision’s first-generation interior has horizontal vent blades on either side of the display, and the Andobil’s metal hook clip seats on those horizontal blades without putting stress on the fins. The clip arm is sturdy enough that it does not pull the vent open under the phone’s weight, which is a common failure point with cheap plastic vent mounts.
The cradle opens to accommodate phones from 4.7 to 6.8 inches, fits thick cases without needing adjustment, and the ball joint rotates a full 360 degrees. One-touch release lets you pull the phone out cleanly. Because this is a universal mount rather than a vehicle-specific one, installation and removal take seconds, and it works in any car in your household, not just the Envision.
Where to Mount Your Phone in a Buick Envision
The Envision’s interior layout gives you a few viable mounting positions, each with different trade-offs depending on how you primarily use your phone in the car.
Center Stack / Screen Surround
On the 2024-2026 Envision with the panoramic display, this is the best position available. The screen surround positions your phone at natural eye level, forward and centered, without blocking any climate controls or requiring you to look far from the road ahead. The MaserWeller mount is designed specifically for this position.
Center Console Anchor
On the 2021-2023 Envision, the Masergogo mount uses a console anchor point that puts the phone at roughly eye level to the right of the infotainment screen. This is a good compromise: forward enough for navigation, stable enough for regular use, and out of the way of the climate controls and touchscreen.
Air Vents
The horizontal vents on both generations of the Envision are a workable mounting location for a quality universal mount like the Andobil. The center vents are the best choice here: they are at a natural height, forward-facing, and accessible without leaning. Avoid the outer vents on the driver’s side if possible, as the angle makes the screen harder to glance at safely.
Windshield
The Envision’s windshield has a moderate rake and decent glass surface area, making suction cup mounts viable for owners who prefer eye-level placement without using the dash or vents. The main limitation is reach: the glass angles back enough that the phone ends up further from the driver than most people prefer. If you go this route, a mount with an extended arm works better than a compact one. We cover the best options in our guide to suction cup windshield mounts.
Frequently Asked Questions
Will a phone mount designed for the 2021-2023 Envision fit the 2024 and newer model?
No. Buick updated the Envision’s interior significantly for 2024, including a new 30-inch panoramic screen and a revised center stack layout. Custom-fit mounts from the 2021-2023 generation are not compatible with the 2024+ interior. You need either the MaserWeller mount designed for the post-refresh dash or a universal vent mount.
Do any of these mounts work with MagSafe?
The MaserWeller (2024-2025) is fully MagSafe-compatible. It includes an adhesive metal ring for non-MagSafe phones. The Masergogo (2021-2023) is a gravity cradle style and works with any phone including MagSafe devices in a case. The Andobil is a standard cradle mount without MagSafe.
What is the best phone mount for a 2016-2020 Buick Envision?
The Andobil air vent mount is the most practical option for first-generation Envision owners. The older interior has conventional horizontal vent blades that work well with quality vent clip mounts. Vehicle-specific options for the 2016-2020 interior are available from brands like LUNQIN and Masergogo, but selection is more limited than for the current generation.
Can I use a phone mount without affecting the air vents?
Yes. The MaserWeller mount for the 2024-2025 Envision specifically clips to the screen surround rather than the vents, leaving all vent slots fully functional. The Masergogo for the 2021-2023 model also uses a console anchor rather than a vent blade. The Andobil clips onto the vent but does not obstruct airflow when your phone is loaded into the cradle.
Does the Buick Envision have a good place for a phone mount?
Yes, particularly on the 2024 and newer models. The wide screen surround creates a natural, stable anchor point at eye level. On the 2021-2023 models the console-anchor position is similarly effective. The first-gen interior is more conventional and works well with standard vent mounts. Compared to many other compact luxury SUVs, the Envision’s interior layout is relatively mount-friendly once you use the right product for your generation.
Related Guides
If you are shopping for mounts for other vehicles in the GM or Buick family, these guides cover related models with the same attention to generation-specific fitment:
- Buick Enclave Phone Mounts — Buick’s larger three-row SUV, different interior layout and vent configuration
- GMC Acadia Phone Mounts — Similar compact luxury SUV on a related GM platform, similar mount challenges
- Best Suction Cup Car Phone Mounts — Windshield and dash options for any vehicle
