Finding the right Chevy Corvette phone mount is not easy. Every generation trades cabin space for driving position, which means the wide console, low seating, and aggressive windshield rake that make the car fun to drive also eliminate most of the mounting spots that work in an ordinary sedan. The problem gets more complicated once you factor in three very different interiors: the C6’s tight center stack, the C7’s revised console and vents, and the C8’s wide dash built around a massive digital instrument cluster and center touchscreen.
A mount built for one generation will not fit another, and in a cockpit this narrow, a poor fit is not a minor inconvenience. It is a mount rattling loose at highway speed. The good news is that each generation now has purpose-built options, similar to what we found when we tracked down mounts for the Camaro’s equally cramped cockpit. Below are our picks by generation, plus a universal option for anyone who wants a mount that will move with them to a future car.
Corvette Phone Mount Comparison
| Mount | Best For | Years / Trim |
|---|---|---|
| Center Console Screen Clamp Mount | Best custom fit for the C8’s nav screen area | 2020-2024 |
| Magnetic Dash Clip Mount | Best for C8 owners running MagSafe or magnetic cases | 2020-2025 Stingray, Z06, Z51, E-Ray |
| Aluminum Console Handle Mount | Best low-profile fit for C7 | 2014-2019 |
| Telescopic Arm Console Mount | Best for C7 owners who want more reach and angle | 2014-2019 |
| Magnetic Console / Air Outlet Mount | Best custom fit for C6, including Z06 and ZR1 | 2005-2013 |
| Andobil MagSafe Air Vent Mount | Best universal pick, works across every generation | All years |
Center Console Screen Clamp Mount : 2020-2024 C8
The C8 moved the phone mounting problem somewhere new: the wide bezel surrounding the vertical center touchscreen. This mount is built around that shape. It clamps directly to the edge of the console navigation display, using tensioned arms rather than adhesive, so nothing touches the glass and nothing needs to be removed from the dash to install it. Because the clamp grips the screen housing itself rather than a vent or trim panel, it holds a consistent position no matter how the car is driven, which matters in a chassis that generates real lateral load in corners.
The cradle opens wide enough to accommodate most phones in a case, and the arm gives enough reach to bring the phone slightly toward the driver without crowding the climate controls below it. Because it clamps rather than adheres, removal is quick if you want the console clear for a photo or a dealer visit.
Magnetic Dash Clip Mount : 2020-2025 C8
If you run MagSafe or a magnetic-compatible case, this is the simpler alternative to a cradle. The mount attaches to the dash trim beside the center screen using an adhesive backing, then holds the phone with a magnetic plate rather than clamping arms. Attachment is a single motion: bring the phone close and it snaps into place, no cradle to open or close.
Because there is no cradle mechanism, the mount has a lower profile than the clamp option above, which some C8 owners prefer since it sits closer to the trim line rather than projecting off it. The listing confirms fitment across Stingray, Z06, Z51, and E-Ray trims for 2020 through 2025, so trim level is not a concern here the way it can be with some vehicle-specific brackets.
Aluminum Console Handle Mount : 2014-2019 C7
The C7’s center console has a raised handle running along the passenger side of the console, and this mount uses it as an anchor point instead of the vents or dash. The bracket is aluminum rather than the ABS plastic used in most budget mounts, which keeps flex to a minimum in a cabin that transmits more road vibration than a daily-driver sedan. Nothing attaches to the dash or windshield, so there is no adhesive residue or drilling involved.
The cradle opening is wide enough for most phones in a case, and because the mount sits low on the console rather than up on the dash, it keeps the phone out of the direct sightline to the gauge cluster while still staying within easy reach.
Telescopic Arm Console Mount : 2014-2019 C7
This is the pick for C7 owners who find the console handle mount above too close to the seat for comfortable viewing. It attaches to the same general console area but uses a telescopic arm rather than a fixed bracket, which lets you extend the phone closer to the driver or angle it for a better view of navigation. The base is self-adhesive and designed to sit against the center console side panel without drilling.
Because the arm extends, this mount works better than a fixed bracket if you also use a larger phone or a thicker case, since you can compensate for the added bulk by adjusting reach rather than fighting a cradle that was sized for a smaller device.
Magnetic Console / Air Outlet Mount : 2005-2013 C6
The C6 is the oldest generation covered here, and it is also the one with the fewest aftermarket options, since most mount manufacturers have moved on to newer vehicles. This mount fills that gap. It is designed around the C6’s center console and air outlet area, using a magnetic head rather than a cradle, and it is confirmed to fit Z06 and ZR1 trims in addition to the base coupe and convertible.
Installation is adhesive-backed and does not require removing any trim panels. The head rotates a full 360 degrees, which helps in the C6 since the natural mounting position sits slightly off-axis from a straight-ahead sightline. Because it uses a magnetic plate rather than a cradle, thicker cases and larger phones are not a fitment issue the way they can be with a clamp-style mount.
Andobil MagSafe Air Vent Mount : Universal, All Years
If none of the generation-specific mounts above fit your exact trim, or you would rather run a mount that moves with you to a future vehicle, the Andobil MagSafe vent mount is the fallback we recommend across the whole lineup. It clips onto the vent slats using a metal hook rather than a friction-based plastic hinge, which holds up better over time and does not sag the way cheaper clips do after a few months of use. MagSafe iPhones snap directly onto the N52 magnet array, and a metal ring is included for Android phones or cases without MagSafe.
The 360-degree ball joint adjusts to any viewing angle, and because the mount clips onto the vent rather than the console or dash, it installs and removes in seconds without tools or adhesive. It is also the pick worth keeping in mind if you split time between a Corvette and another vehicle, since it will transfer cleanly to almost any car with standard vent slats.
How to Choose the Right Corvette Phone Mount
Start by confirming your generation and exact trim before ordering anything. The C6, C7, and C8 have completely different console and dash geometry, and a mount built for one will not seat correctly on another, no matter how similar the description sounds. Within the C8 specifically, confirm your trim against the listing, since the wide console screen bezel varies slightly across Stingray, Z06, and E-Ray configurations.
From there, the decision usually comes down to cradle versus magnetic. A cradle-style mount, like the console clamp or the console handle options above, holds the phone with mechanical arms and works with any phone regardless of case thickness or MagSafe compatibility. A magnetic mount attaches and detaches faster and sits with a lower profile, but it depends on either a MagSafe iPhone or the included metal ring adapter for a reliable hold.
Finally, think about how the mount interacts with the rest of the cabin. The C8’s digital gauge cluster and wide center screen mean a mount positioned too high or too far into the console can block a control or crowd the touchscreen. The C6 and C7 have narrower center stacks, so a low-profile mount that sits close to the console tends to work better than a tall arm reaching up toward the windshield.
Frequently Asked Questions About Chevy Corvette Phone Mounts
Will the C8 mounts fit both the Stingray and the Z06?
Yes. Both C8 mounts in this guide are confirmed to fit Stingray, Z06, Z51, and E-Ray trims, since those trims share the same center console and screen bezel dimensions.
Do I need a MagSafe iPhone to use the magnetic mounts?
No. Both magnetic mounts in this guide include a metal ring adapter that adds magnetic compatibility to any phone or case, including Android devices. The hold is slightly weaker than native MagSafe but adequate for normal driving.
Is a vent mount a realistic option in a Corvette?
It depends on the generation. The Andobil vent mount works across all three generations since it clips onto standard vent slats, but console or dash-mounted options tend to sit closer to eye level in the C6 and C7 specifically, since their vents are positioned lower than the ideal sightline for navigation.
Will any of these mounts interfere with the C8’s touchscreen?
No. Both C8 options in this guide attach to the bezel or dash trim surrounding the screen rather than the display itself, so the touchscreen remains fully accessible.
If you drive another performance car alongside the Corvette, our Ford Mustang phone mount guide covers a similarly tight cockpit, and our Chevy Camaro guide deals with many of the same fitment challenges. For a broader look at magnetic mounting across every vehicle type, see our Best MagSafe Car Mounts guide.
Looking for another model? Browse our Master Vehicle Phone Mount Directory for non-destructive recommendations across 26+ major manufacturers.
