Best Phone Mounts for Audi RS 7 (2014–2026) – Clean Dash & Premium Fit Options

The Audi RS 7 is one of those rare vehicles where the interior design actually works in your favor, provided you choose the right mounting strategy.

Unlike many performance cars that fight you with tight layouts and awkward vent placement, the RS 7 gives you width. The dash is wide, relatively flat, and cleanly layered across model years. That creates more usable mounting real estate than you will find in most cars at this price point.

But there is still a catch. This is an Audi with a premium interior, and the wrong mount will either look completely out of place or block controls you need. The dual-layer dash design that defines the RS 7 cabin also creates vent placement challenges that catch a lot of buyers off guard.

That is where custom-fit mounts change the game. While most car phone holder guides push the same generic suction cups at every vehicle, the RS 7 has dedicated brackets designed specifically for its vent and screen geometry. We are covering both the custom-fit options and the best universal alternatives, so you can pick the right approach for your year and setup.

Quick Comparison: Best Phone Mounts for the Audi RS 7

Understanding the RS 7 Interior Before You Buy

The RS 7 has gone through two distinct interior generations, and the differences matter when selecting a mount.

The first-generation RS 7 ran from 2014 through 2018 and used Audi’s older MMI infotainment interface with a relatively compact screen and conventional horizontal vent placement. The second generation, introduced for 2020 and continuing through the current model, brought the dual-screen MMI Touch Response system with larger displays, revised vent positioning, and a more layered dash architecture.

Both generations share a few characteristics that directly shape your mount options:

• Wide, flat upper dash surface: One of the better windshield and dash mounting platforms in the performance sedan segment
• Dual-layer dashboard design: The layered dash creates interference issues for many vent mounts, particularly in the second-generation cabin
• Freestanding infotainment screen: Limits usable center dash real estate, especially in 2020 and newer models
• Rear cup holders positioned forward: The front cup holders sit at an accessible angle, making cup holder mounts viable for both driver and passenger use

Best Phone Mounts for the Audi RS 7

1. BEERTE Custom-Fit MagSafe Mount for 2012-2018 RS7 (Best for Gen 1 Owners)

If you are driving a first-generation RS 7, a custom-fit bracket built specifically for the A6/A7/RS6/RS7 vent geometry is the cleanest solution available on Amazon.

The BEERTE mount is engineered for the 2012 through 2018 generation. It clips into the vent without the generic hook-and-pray approach of universal vent mounts, locking into place with the actual geometry of the vent blades. The result is zero wobble and a finish that looks like it belongs in the car.

The magnetic attachment system uses 20 N52 magnets, which is substantial. iPhone 12 through current MagSafe models attach directly with no additional hardware. Android phones and older iPhones work with the included metal ring. The closed magnetic field design is engineered not to interfere with GPS signals, which matters on a car you are likely navigating with.

This is not a universal mount that works approximately well. It is built for this specific Audi interior, and the fit difference is immediately obvious.

2. Masergogo Custom-Fit Mount for 2019-2025 RS7 (Best for Gen 2 Owners)

For second-generation RS 7 owners, the Masergogo is the custom-fit pick. It is specifically designed for the 2019-2025 Audi A6/A7 and the 2023-2025 S6/S7/RS7 lineup, which maps directly to the current RS 7 generation.

Where the dual-screen MMI layout makes universal mounts awkward, the Masergogo uses the vehicle’s own structure as its mounting platform. It positions the phone at screen height without blocking air outlets or competing with the infotainment display. The 360-degree rotation ball joint lets you flip between portrait and landscape without removing the mount, which is useful when you switch between navigation apps and music controls.

One-hand operation is genuine here. The auto-lock gravity arm clamps the phone when you set it in and releases cleanly. On a car with a $90,000-plus interior, the last thing you want is wrestling with a cheap clamp every time you park.

Verify your exact model year and trim before ordering, as Audi interior variations across model years can affect fitment.

3. Arkon MegaGrip Suction Mount (Best Universal Option)

When you want a universal mount that still does the job properly in the RS 7, the Arkon MegaGrip is the pick. It has been a consistent recommendation across luxury vehicle guides for good reason: it is adjustable enough to take full advantage of the RS 7’s wide dash and windshield, and it holds position reliably.

The arm extends, pivots, and rotates, which lets you dial in placement precisely rather than settling for wherever a vent clip lands. The included adhesive dash disk means you can run it on the dash surface rather than the windshield if you prefer a lower, cleaner position.

Arkon backs these mounts with a lifetime warranty, which is not something you see often at this price point. If the suction base ever fails, they replace it. For a vehicle where you are already spending serious money on everything else, that kind of build confidence matters.

4. Scosche MagicMount Elite (Best for Aesthetics)

The RS 7 is a vehicle where interior aesthetics matter. You are not going to want a bulky plastic arm poking out of the dash. The Scosche MagicMount Elite addresses that directly.

It is an adhesive magnetic mount, which means it sits low-profile on the dash surface with no arms or cradles extending toward the driver. The magnetic face holds the phone securely, and the overall footprint is minimal enough that you can almost forget it is there between uses.

This is an adhesive-base design that works with MagSafe technology, so iPhone users with MagSafe cases get fast, satisfying attachment every time. For anyone prioritizing a clean look that matches the RS 7 interior, this is the option to consider.

5. VANMASS Suction Mount (Best for Stability)

For drivers running a larger, heavier phone or using a substantial case, the VANMASS brings more holding power than most suction-based mounts.

The reinforced suction base and sturdier arm reduce vibration transfer, which is relevant in a high-powered car where the drivetrain generates more movement through the chassis than a typical commuter sedan. The military-grade suction cup designation is marketing language, but the underlying hardware is genuinely more robust than the Arkon at the cost of a slightly larger profile.

Function-first rather than style-first, but it works exceptionally well where stability is the primary concern.

6. APPS2Car Cup Holder Mount (Best for Tablets)

The RS 7’s front cup holder placement makes this one of the better luxury sedans for running a tablet mount. The holders sit at a usable angle for passenger access without crowding the center console controls.

This is not a driver navigation setup. The cup holder position sits outside direct driver sightlines, which makes it poor for GPS use but ideal for passengers streaming content on a longer trip. It includes both a phone cradle and a tablet cradle, giving you flexibility without buying two separate mounts.

If you need a driver-accessible navigation mount, use one of the options above. If you want a secondary device solution for passengers or rear-seat viewing, this is the cleanest way to do it in the RS 7.

Common Mounting Problems in the Audi RS 7

Installation Tips

Which Mount Is Right for Your RS 7?

The answer splits clearly by generation. If you have a 2014 to 2018 RS 7, the BEERTE custom-fit MagSafe mount is the right starting point. If you are in a 2020 or newer RS 7, the Masergogo custom bracket fits the revised interior correctly.

For anyone who prefers a universal solution across multiple vehicles, or who wants windshield placement specifically, the Arkon MegaGrip is the most consistently reliable option at a reasonable price. The Scosche is the call if the aesthetics of the RS 7 interior are a priority and you are on a MagSafe iPhone. The VANMASS is for heavy phone setups where vibration damping matters.

The RS 7 rewards the right mounting approach with a genuinely clean installation. It punishes the wrong one with a rattling, poorly positioned device that looks out of place in an otherwise immaculate interior.

Related Mount Guides

• Audi RS 5 Mount Guide
• Lexus RX Mount Guide
• Volvo XC40 Mount Guide
• Mercedes GLK Mount Guide