The Toyota C-HR has had two very different lives in the US market. The first generation ran from 2018 through 2022 with a compact interior, an 8-inch touchscreen, and a dash layout that works well for phone mounts. The nameplate then went dark in the US for a few years before returning for 2026 as a completely different vehicle: a fully electric crossover with a 14-inch touchscreen, dual motors, and an interior that shares nothing with the original. If you just saw a C-HR on a dealer lot, that is almost certainly the 2026 EV. If you are finding a mount for a used C-HR you already own, that is the 2018 through 2022 first generation.
This guide covers both. The custom-fit mounts in the first two sections were built specifically for the first-gen 8-inch interior and will not fit the 2026 model. The two universal picks at the end work in any C-HR regardless of year, including the 2026 EV, and are the right starting point for new owners until generation-specific mounts arrive for the 14-inch screen.
| Mount | Best For | Years / Fitment |
|---|---|---|
| PZK Screen Clip Mount | Auto-lock cradle, clean 8-inch screen fit | 2019–2022 C-HR (8-inch screen only) |
| LUNQIN Custom Vent Mount | Vent-based custom fit, all phone sizes | 2018–2022 C-HR (first gen only) |
| APPS2Car MagSafe Vent Mount | MagSafe iPhones, one-motion dock | All years including 2026 (universal) |
| MAGIC JOHN Suction Mount | Windshield or dash, any phone | All years including 2026 (universal) |
PZK Screen Clip Mount for 2019–2022 Toyota C-HR
The C-HR’s 8-inch touchscreen sits in a relatively elevated, driver-facing position, which makes the lower bezel a practical mounting surface for a screen clip. The PZK mount is built specifically for this interior. The base clips onto the bezel trim of the 8-inch display without adhesive or drilling, and the auto-lock cradle opens and locks automatically when you press the phone in. A one-touch release button on the back lets you pull the phone free with one hand while keeping your eyes forward.
Fitment covers 2019, 2020, 2021, and 2022 C-HR models with the 8-inch screen. The bracket sits flush against the display without obstructing the touch surface, and there is a small storage compartment built into the back of the mount for a parking card or a key fob. The 360-degree ball joint handles portrait and landscape, and the spring-loaded cradle accommodates phones from 4 to 7 inches in a case. No tools required for installation or removal.
LUNQIN Custom Vent Mount for 2018–2022 Toyota C-HR
The LUNQIN mount takes a different approach from the screen clip: it attaches to the center vents using a custom-shaped base built around the C-HR’s specific vent geometry rather than a generic clip. That distinction matters in a vehicle like the C-HR, where the center vent profile is narrower and more stylized than the horizontal slats you find in most crossovers. A generic vent clip often sits at a poor angle or rocks slightly under the phone’s weight. A custom base eliminates that problem because it was designed for these specific vents.
The mount fits 2018 through 2022 C-HR models, which gives it slightly broader year coverage than the screen clip above. It handles all phone sizes from 3.5 to 7 inches, accommodates thick protective cases, and uses a 360-degree ball joint for portrait and landscape rotation. Installation is tool-free. The bracket slides into the vent trim and locks without damaging the slats, and the mount can be removed cleanly if you sell the car or want to transfer it to another vehicle.
APPS2Car MagSafe Vent Mount (Universal)
For iPhone 12 and newer, a MagSafe vent mount is worth considering regardless of which C-HR year you own. The APPS2Car uses 17 high-performance permanent magnets precisely aligned to the MagSafe spec, which means the hold is strong enough to stay put on rough pavement and through hard stops. The metal hook clip is designed to fit horizontal and vertical vent blades up to 3.8mm thick, which covers the C-HR’s center vents without rattle or slippage.
The phone snaps on and off in one motion with no cradle arms to open. For drivers who get in and out of the car frequently during the day, that one-second dock cycle adds up. Non-MagSafe phones and Android devices work through the included metal ring, which adheres to the back of the case and provides the magnetic connection. The 360-degree adjustment handles both portrait and landscape orientation.
MAGIC JOHN Suction Cup Mount (Universal)
The MAGIC JOHN is a full metal suction cup mount that attaches to either the windshield or the dashboard using an included adhesive disk pad. The C-HR’s windshield has a moderate rake and a reasonable reach from the driver’s seat, making it a workable surface for a suction mount. If your state restricts windshield-mounted devices, the adhesive dash disk puts the mount on the flat center dash area instead.
The cradle expands to 4 inches wide and accommodates phones up to 7 inches in screen size, including larger-format iPhones and Samsung Galaxy devices in cases. A 360-degree ball joint handles portrait and landscape orientation, and a one-touch button on the back of the cradle releases the phone cleanly with one hand. The metal construction holds up better over time than plastic alternatives in temperature extremes, which matters in a small crossover that heats up faster than a larger vehicle on a hot day.
Which C-HR Phone Mount Is Right for You?
The right pick depends on which generation you own.
If you own a 2019, 2020, 2021, or 2022 C-HR with the 8-inch screen and want the cleanest integration, start with the PZK screen clip. It attaches to the display bezel itself, keeps the phone at eye level right next to the infotainment screen, and the auto-lock cradle makes daily one-handed use fast and reliable. It is the most factory-looking option available for this generation.
If you prefer a vent-based mount or own a 2018 model, the LUNQIN is the better call. The custom-shaped base was engineered for the C-HR’s specific vent profile, which gives it a more stable installation than a generic clip on these vents. It also covers the full 2018 through 2022 range.
If you own the 2026 C-HR EV, skip the first two sections entirely. Neither custom-fit mount was designed for the 2026 interior or its 14-inch screen, and they will not install correctly. The APPS2Car MagSafe vent mount and the MAGIC JOHN suction mount are both universal and work in the 2026 without any fitment concerns. As the 2026 C-HR builds a sales base, expect dedicated screen clip mounts for the 14-inch display to appear. We will update this guide when those arrive.
For iPhone 12 and newer owners on any generation, the APPS2Car MagSafe vent mount is worth considering regardless of year. The one-motion magnetic dock is noticeably faster than opening a cradle arm every time you get in the car, and the metal hook holds well on the C-HR’s center vents across both generations. This is also the pick that transfers to any other vehicle you drive.
The MAGIC JOHN is the most flexible option overall. It works on any C-HR year, accepts any phone without adapters or accessories, and the windshield or dash placement keeps the phone closer to the driver’s natural sightline than a vent mount. If you have passengers who sometimes need to reach the phone for navigation, the windshield position is easier to access from the passenger seat than a center vent mount.
Frequently Asked Questions
Are there custom phone mounts for the 2026 Toyota C-HR EV?
Not yet. The 2026 C-HR is a completely new vehicle with a 14-inch touchscreen and an interior that shares nothing with the 2018–2022 first generation. It only began arriving at US dealerships in March 2026, so the aftermarket has not had time to produce generation-specific screen clip mounts for that interior. The two universal picks in this guide (the APPS2Car MagSafe vent mount and the MAGIC JOHN suction mount) both work in the 2026 without fitment concerns and are the right starting point for now. We will update this guide when dedicated 2026 mounts become available.
Will a 2019–2022 C-HR screen clip mount fit my 2018 model?
No. The 2018 C-HR uses a different dash layout than the 2019 and newer models, and the screen clip mounts designed for the 8-inch screen will not seat correctly on the 2018 interior. The LUNQIN vent mount and both universal picks in this guide cover the 2018 model year.
Can I use a MagSafe mount with a non-iPhone phone in the C-HR?
Yes. Both MagSafe-compatible mounts in this guide include a metal ring adapter that adheres to the back of a non-MagSafe phone or case. Once the ring is in place, the mount’s magnets attach to it the same way they would to an iPhone. The hold strength is the same, and the one-motion dock works identically.
Does a phone mount block the C-HR’s air vents?
A vent mount partially reduces airflow from the vent it attaches to. This is an inherent tradeoff with any vent-based mount design. The screen clip mounts in this guide avoid that issue entirely since they attach to the display bezel rather than the vents. If unobstructed airflow to both center vents is important to you, the PZK screen clip or the suction cup windshield mount are the better options.
Is windshield mounting legal in my state?
Windshield mounting laws vary by state. California, Minnesota, and a few others restrict where on the windshield a device can be mounted. Check your local regulations before using a windshield mount. The dashboard adhesive disk included with the MAGIC JOHN provides an alternative placement that avoids the windshield entirely.
Related Mount Guides
If you drive other vehicles in the Toyota lineup or want to explore more mounting options, these guides follow the same format with generation-specific picks and clear fitment information:
