Finding the right Toyota Tundra phone mount starts with the model year. The Tundra dashboard changed significantly between the 2007-2013 trucks, the refreshed 2014-2021 interior, and the redesigned 2022-2026 generation. A mount that fits one dashboard may not attach to another, and newer Tundras add another complication: the factory touchscreen can be either 8 inches or 14 inches.
This guide separates the choices by Tundra model year first. That is more useful than treating every truck from 2007 through 2026 as if it had the same dashboard. We will also cover universal options for owners who have the 8-inch screen or simply do not want a vehicle-specific dash mount.
Toyota Tundra Phone Mount Fitment by Year
| Tundra Years | Dashboard | Recommended Mount | Mounting Location |
|---|---|---|---|
| 2007-2013 | Early second-generation dash | MikeHam Custom Cradle | Center dash |
| 2007-2013 | Early second-generation dash | APESER Magnetic Mount | Above center vent |
| 2014-2021 | Refreshed second-generation dash | Tackform Vent Mount | Center vent bezel |
| 2022-2026 | Third-generation dash with 14-inch screen | PZK Magnetic Charging Mount | Infotainment screen |
| Any Year | Universal fallback | MAGIC JOHN Windshield Mount | Windshield |
Best Phone Mounts for a 2007-2013 Toyota Tundra
The 2007-2013 Tundra uses the earlier version of Toyota’s second-generation dashboard. These trucks need their own mounting solutions. A bracket designed for the substantially revised 2014 dashboard should not be assumed to fit an earlier truck.
There are now several mounts shaped specifically for this interior, which makes a custom solution more attractive than relying on a generic vent clip.
MikeHam Custom Tundra Phone Holder
The MikeHam is a good choice for drivers who prefer a conventional cradle rather than a magnetic holder. Its base is made specifically for the 2007-2013 Tundra dashboard instead of using a universal suction cup or small vent clip.
The holder uses adjustable arms around the phone and a rotating ball joint so the screen can be positioned vertically or horizontally. That also makes it more forgiving when the truck is shared by people using different phones.
Because the phone is mechanically clamped, you do not need a MagSafe phone, magnetic case or adhesive metal ring.
APESER Magnetic Mount for 2007-2013 Tundra
The APESER takes a different approach. Instead of wrapping adjustable arms around the phone, it uses a magnetic head attached to a vehicle-specific base positioned near the center vent area.
This is the better choice of the two if quick one-handed phone attachment matters more than having a mechanical cradle. The head rotates through 360 degrees, allowing the phone to be positioned for navigation in portrait or landscape orientation.
The base is shaped for the 2007-2013 Tundra rather than clipping directly onto a movable vent blade. That is useful in a truck because a heavier phone hanging from a small adjustable vent louver can bounce more than a mount supported by the surrounding dash structure.
Magnetic compatibility still matters. Check the phone and case before ordering. Some Android phones require a magnetic case or ring, and a thick non-magnetic case can reduce holding strength.
Best Phone Mount for a 2014-2021 Toyota Tundra
Toyota retained the second-generation Tundra platform through 2021, but the 2014 model received a substantial dashboard and interior redesign. That makes 2014 an important dividing line when shopping for a vehicle-specific phone mount.
For these trucks, the Tackform vent-bezel design remains one of the cleaner choices.
Tackform Vent Mount
The Tackform base fits around the vent area on the 2014-2021 Tundra rather than depending on a small universal clip squeezed onto a vent blade.
That difference matters in a truck. A phone and cradle create additional weight and vibration, especially on rough pavement. Supporting the holder from the vent surround gives it a more substantial foundation while still keeping the phone near the driver’s normal line of sight.
Tackform pairs the base with a spring-loaded phone cradle. This is a mechanical mount rather than a wireless charger, so it works without requiring a MagSafe-compatible device.
It is also a good choice for large phones or phones in protective cases because the cradle provides physical side support instead of relying entirely on magnetic attraction.
Best Phone Mount for a 2022-2026 Toyota Tundra
The completely redesigned third-generation Tundra arrived for 2022. Its dashboard is very different from the previous truck, and the large center touchscreen creates one of the best mounting locations for a model-specific phone holder.
There is one important catch: Toyota offered both an 8-inch and a 14-inch touchscreen during these model years. A mount molded around the larger screen bezel will not fit the smaller display.
PZK Magnetic Wireless Charging Mount
The PZK is designed specifically around the factory 14-inch screen used in compatible 2022-2026 Tundras and 2023-2026 Sequoias.
Its fitted base positions the phone beside the center display instead of hanging it from an air vent. That preserves airflow and puts the phone close to the infotainment system, which makes the two displays easier to glance between when using navigation or another phone-based app.
The current version combines a magnetic phone head with wireless charging. It can rotate for portrait or landscape use, and the magnetic design allows one-handed attachment and removal.
This mount makes the most sense for a MagSafe-compatible iPhone or a phone equipped with a compatible magnetic case. Owners using a thick conventional case should check magnetic compatibility before ordering.
What If Your Tundra Has the 8-Inch Screen?
Owners of 2022-2026 Tundras with the 8-inch display should skip mounts designed to wrap around the 14-inch screen.
This is one situation where a universal windshield mount can be the simpler choice. It avoids guessing whether a vehicle-specific screen bracket will match the smaller bezel.
MAGIC JOHN Windshield Mount
The MAGIC JOHN uses a suction base on the windshield and an adjustable mechanical cradle for the phone. Because it does not depend on the Tundra’s vent, dashboard contours or infotainment screen, it can work across multiple model years.
A windshield mount also gives you more freedom to choose the phone’s position. That can be helpful in a full-size truck where the center of the dashboard is relatively far from the driver.
Placement is important. Keep the phone low enough that it does not interfere with the driver’s forward view, and check applicable windshield-mounting laws before choosing a permanent location.
As with any suction mount, apply it to clean, smooth glass and periodically inspect the suction base. Repeated heat cycles inside a parked truck can eventually weaken any suction connection.
For more options using this mounting style, see our best suction cup phone mounts guide.
Cradle vs. Magnetic Tundra Phone Mounts
Choosing between a mechanical cradle and magnetic holder mostly comes down to your phone and how the truck is used.
A mechanical cradle is the safer choice when several people drive the truck, when phones vary in size, or when the phone is kept in a bulky protective case. The holder physically grips the phone and does not depend on a magnetic case.
A magnetic mount is quicker to use. Place the phone against the head and remove it with one hand. For a driver getting in and out of the truck repeatedly, that convenience can be significant.
Magnetic mounting and wireless charging are not the same thing. Some magnetic holders provide no power at all, while others combine the magnetic head with a charging coil. Our MagSafe car mount guide explains the difference in more detail.
Where Should You Mount a Phone in a Tundra?
The ideal position keeps the phone visible without blocking the road, important controls or the factory screen.
Dash and vehicle-specific mounts usually provide the cleanest installation because their bases are designed around the truck’s interior.
Screen-edge mounts are particularly useful on 2022-2026 trucks with the 14-inch display because they keep the phone close to the center touchscreen without sacrificing an air vent.
Vent mounts can work well when the mounting base is designed around the vent surround. Small universal clips are more dependent on the shape and strength of an individual vent blade.
Windshield mounts offer the most placement flexibility and are useful when no model-specific bracket fits the truck. The tradeoff is that the holder is more visible and must be positioned carefully.
For a broader comparison of mounting locations in pickups and larger vehicles, see our phone mounts for trucks and rigs guide.
Toyota Tundra Phone Mount FAQ
What phone mount fits a 2007-2013 Toyota Tundra?
Use a mount specifically designed for the 2007-2013 dashboard. The MikeHam cradle and APESER magnetic mount above are both intended for these earlier second-generation Tundras. A custom 2014-2021 vent mount should not be assumed to fit.
What phone mount fits a 2014-2021 Toyota Tundra?
The Tackform vent mount above is shaped for the 2014-2021 Tundra vent area. These trucks use the substantially revised later second-generation dashboard.
Will a 14-inch Tundra screen mount fit the 8-inch screen?
No. The screen bezel and dimensions are different. A mount specifically molded around the 14-inch display should not be used on an 8-inch Tundra screen.
Does every 2022-2026 Tundra have the 14-inch touchscreen?
No. Toyota offered a standard 8-inch touchscreen and an available 14-inch touchscreen during this generation. Check the truck before buying any screen-mounted holder.
What about the 2027 Toyota Tundra?
Toyota has announced changes for the 2027 Tundra, including a standard 14-inch multimedia screen. We are not extending 2022-2026 accessory fitment to the 2027 model until mount manufacturers confirm that their bases fit the updated truck.
Which Toyota Tundra Phone Mount Should You Buy?
Start with the truck’s model year.
For a 2007-2013 Tundra, choose the MikeHam if you prefer a conventional cradle or the APESER if you want magnetic attachment.
For a 2014-2021 Tundra, the Tackform provides a clean vehicle-specific mounting location around the vent area without asking a small universal vent clip to support the phone.
For a 2022-2026 Tundra with the 14-inch screen, the PZK makes use of the redesigned dashboard by positioning the phone directly beside the factory display.
If you have a 2022-2026 Tundra with the 8-inch screen, or simply do not want a mount attached to the dashboard or vents, the MAGIC JOHN windshield mount provides a universal alternative.
The important part is matching the mount to the dashboard before comparing extra features. Tundra interiors changed enough between these year groups that model-specific fit should come before charging speed, magnet strength or cradle style.
Related Mount Guides
Shopping for Toyota’s smaller pickup? Our Toyota Tacoma phone mount guide also separates recommendations by dashboard generation and fitment.
