Finding the right Dodge Charger phone mount depends on which generation you drive. The 2011-2023 Charger shares a dashboard and vent layout across most of its production run, which means vehicle-specific mounts are widely available and fit reliably. The all-new 2024 and later Charger, sold as the Daytona EV and the gas-powered Sixpack, uses a completely different interior on the STLA Large platform, so none of the older custom mounts below will fit that generation.
This guide covers two mounts built specifically for the 2011-2023 vent design, plus three universal options that work regardless of which Charger you own. Owners of the newer Charger who want a dedicated fit rather than a universal mount can also check ProClip, which produces vehicle-specific console and dash mounts for later Charger model years, though it is sold direct rather than through Amazon.
Comparison Table
| Mount | Best For | Years / Trim |
|---|---|---|
| CUSTOMish Standard Vent Mount | Budget vent mount with hidden AirTag storage | 2011-2023 Charger, all trims |
| CUSTOMish MagSafe Vent Mount | One-hand MagSafe docking with wireless charging | 2011-2023 Charger, all trims |
| LISEN MagSafe Vent Mount | Universal MagSafe on any vent style | All years, all trims |
| iOttie Easy One Touch 6 | Dash or windshield mounting, non-MagSafe phones | All years, all trims |
| Ekavtor Magnetic Suction Mount | Heavy-duty dash or windshield suction | All years, all trims |
CUSTOMish Standard Vent Mount (2011-2023)
The CUSTOMish Standard is built specifically around the vent shape on the 2011-2023 Dodge Charger dashboard, so it snaps around the vent fins without pinching them shut or interrupting airflow. There are no suction cups or adhesive pads involved, which removes the two most common failure points on generic phone mounts. Installation takes seconds and requires no tools. One detail worth calling out is the hidden pocket built into the back of the cradle, sized to hold a small tracking tag out of sight, which is a nice touch for anyone worried about the phone mount itself walking off or wants a discreet spot to stash a spare card.
This is the pick for Charger owners who want a dedicated fit without paying extra for wireless charging they may not need. It holds phones of varying sizes and most slim to mid-thickness cases without adjustment fuss.
CUSTOMish MagSafe Vent Mount (2011-2023)
This is the wireless charging version of the mount above, built on the same vent-fit base but swapping the cradle for a MagSafe-compatible charging plate. For iPhone owners, that means the phone snaps into place with one hand and starts charging immediately, with no cable to plug in every time you get in the car. The mounting hardware is identical to the standard version, so fitment on the 2011-2023 Charger is just as solid, and the vent airflow is not blocked.
Anyone without a MagSafe iPhone can still use this mount with an adhesive metal ring on the back of the phone or case, though the standard cradle version above is the more practical choice if wireless charging is not a priority for you.
LISEN MagSafe Vent Mount (Universal)
If you drive the new 2024-and-later Charger, or you simply prefer a mount that will move with you to your next car, the LISEN is a strong universal alternative to the vehicle-specific options above. It uses an extended steel hook clip that LISEN says is fifty percent longer than standard vent clips, which improves the hold on a wider range of vent fin shapes, including the newer Charger’s vent design. The magnetic array is rated for a firm hold on MagSafe iPhones and, with the included metal ring, on any other phone as well.
The mount rotates a full 360 degrees, so switching between portrait for messaging and landscape for navigation takes one motion. Keep in mind this is a phone mount only, it does not include wireless charging hardware, so if that matters to you the CUSTOMish MagSafe option above or another dedicated MagSafe charging mount is the better fit.
iOttie Easy One Touch 6 (Universal)
For drivers who would rather skip magnets and cradle their phone in a mechanical grip, the iOttie Easy One Touch 6 remains one of the most dependable dash and windshield mounts on the market. A one-handed push locks the side arms around the phone automatically, and the telescopic arm extends from five to nearly seven inches with a wide range of pivot angles, so you can position the phone wherever it is easiest to glance at in the Charger’s cabin.
The mount uses a suction base with an adjustable foot, which works equally well on a flat section of dashboard or on the windshield glass itself in states where windshield mounting is legal. A built-in cable channel keeps a charging cord tidy rather than dangling across the console.
Ekavtor Magnetic Suction Mount (Universal)
The Ekavtor takes a different approach from the vent-clip options above by anchoring to the dashboard or windshield with a vacuum suction base rather than a vent clip. Ekavtor rates the suction hold at a very high pull force, and pairs it with a magnetic head built around N52 grade magnets, which is the strongest commonly available in consumer phone mounts. The result is a setup that stays locked in place through hard braking and rough pavement, without any dependence on your Charger’s vent fin shape or spacing.
MagSafe iPhones attach directly, and the included metal ring extends compatibility to any other phone or case. The suction pad is reusable and can be rinsed clean if it starts to lose grip over time, which extends its usable life well beyond cheaper suction mounts that need to be replaced once the gel degrades.
This is the pick for Charger owners who want maximum holding strength and do not want to rely on the vent as the mounting point, whether that is because of a modified dash, a preference for keeping the vents completely open, or simply wanting a mount that transfers cleanly to a future vehicle.
Buying Guide: Choosing the Right Dodge Charger Phone Mount
The single biggest factor in choosing a Dodge Charger phone mount is knowing which generation you are working with. The 2011-2023 Charger kept a consistent dashboard and vent layout for its entire run, which is why vehicle-specific mounts like the CUSTOMish options above can be built to fit precisely and stay in production for over a decade. The 2024-and-later Charger, built on the new STLA Large platform and sold as the electric Daytona or the gas-powered Sixpack, has an entirely different interior, and vehicle-specific mounts for that generation are not yet widely available on Amazon. If you drive the new Charger and want a dedicated fit, ProClip carries mounts built for the later model years through its own site. Otherwise, one of the three universal picks in this guide is the more realistic path.
Within the universal category, the decision usually comes down to vent versus suction. Vent mounts keep the phone at eye level near the center stack and install with no adhesive or suction residue to worry about, but they depend on your vent fin shape holding the clip securely. Suction mounts like the Ekavtor are not limited by vent geometry at all, and modern suction technology holds far better than older mounts, but they do occupy dashboard or windshield real estate that some drivers would rather keep clear.
If you carry an iPhone with MagSafe, a magnetic mount is worth the small premium over a mechanical cradle. Docking and removing the phone takes a fraction of the time, and there is no cradle arm to catch on a case. Android owners or anyone with a non-MagSafe iPhone can still use any of the magnetic mounts here with the included adhesive ring, though a mechanical mount like the iOttie remains the simpler option if you would rather not add anything to the back of your phone.
Frequently Asked Questions
Will the CUSTOMish mounts fit the 2024 or later Dodge Charger?
No. The CUSTOMish Standard and MagSafe vent mounts are built for the 2011-2023 Charger’s vent shape and dashboard layout. The 2024-and-later Charger uses a new interior on the STLA Large platform, so owners of the newer generation should choose one of the universal mounts in this guide instead.
Do I need a MagSafe case for the MagSafe mounts to work?
No. Both the CUSTOMish MagSafe vent mount and the LISEN MagSafe vent mount include a thin metal ring that adheres to the back of any phone or case, giving non-MagSafe devices the same magnetic hold.
Is it legal to mount a phone on the windshield in my state?
It depends on where you live. Many states restrict windshield mounts to a small zone in the lower corner of the glass, and a few states ban windshield mounting outright. If you are unsure, mount to the dashboard instead using the iOttie Easy One Touch 6 or the Ekavtor suction mount, both of which work equally well on dash surfaces.
Which mount is best if I want wireless charging?
The CUSTOMish MagSafe Vent Mount is the most direct option for the 2011-2023 Charger, since it combines the vehicle-specific vent fit with a built-in charging plate. The LISEN and Ekavtor mounts are magnetic but do not include wireless charging hardware.
