Using phone mounts for a microphone stand is one of the easiest ways to upgrade a recording, streaming, or live performance setup. Whether you are using your phone for lyrics, recording video, livestreaming, monitoring audio, or running apps, a solid phone mount for a microphone stand keeps your device at eye level and out of the way.
Instead of juggling your phone in your hand or setting it on a table, a proper mic stand phone holder keeps it secure, visible, and stable. The key is choosing a mount that grips your phone tightly, adjusts easily, and does not throw off the balance of your stand.
Quick answer: The best way to mount a phone to a microphone stand is with a clamp-on holder attached to the vertical shaft of the stand. Avoid the boom arm unless the mount is very lightweight and secure.
If you are building out a full setup, our tablet mount guides and phone mount articles cover more mounting options for different use cases.
Why Mount a Phone to a Mic Stand?
This setup works well across a wide range of scenarios. Musicians use it for lyrics, setlists, and tuning apps. Podcasters and streamers use it for recording video, monitoring chat, or controlling audio. Speakers and teachers use it for notes and timers. It is a simple upgrade that adds flexibility without adding clutter to a desk or stage.
It also helps with posture and eye contact. Instead of looking down at a table or holding your phone awkwardly, a mic stand phone holder keeps everything aligned with your microphone and natural line of sight.
What to Look for in a Mic Stand Phone Holder
The best phone mounts for microphone stands focus on three things: grip, adjustability, and stability. You want a mount that holds your phone securely, even if you tap the screen or adjust settings mid-session, without slipping or bouncing.
Look for rubber grips, an adjustable clamp width, and a solid clamping mechanism. If you plan to record video or stream, confirm the mount supports both portrait and landscape orientation. Also consider whether a fixed cradle or a flexible arm suits your setup better, since a longer arm gives you more reach but a shorter clamp is generally more stable under repeated tapping.
Clamp diameter matters more than most people expect. Standard mic stand tubing on the vertical shaft usually runs between about half an inch and an inch, but boom arms, tripod legs, and desk-mount bars are not always the same thickness. Before buying, measure the section of the stand you plan to use and compare it against the mount’s stated clamp range so you are not stuck returning a mount that cannot open wide enough, or one that is too loose to hold steady.
Weight capacity is another detail worth checking, especially if you use a larger phone or a rugged case. A cradle rated for a light, case-free phone can sag or slowly slip on a heavier device, particularly on flexible gooseneck arms where the entire weight is supported at the far end. Mounts built with metal ball joints or a locking clamp mechanism tend to hold heavier phones more reliably than mounts that rely on plastic hinges or friction alone.
Finally, think about how you will actually use the mount during a session. A musician glancing at lyrics between songs has different needs than a podcaster who is tapping the screen constantly to control a recording app or check chat messages. Frequent touch input calls for a stiffer, more rigid mount, while occasional glances are fine with a lighter, more adjustable arm.
| Mount | Best For | Why It Stands Out |
|---|---|---|
| Hercules DG207B | Best overall | Purpose-built grip and stand compatibility |
| Tackform Mic Stand Phone Holder | Pro-grade, studio use | CNC aluminum build with a spring-loaded cradle |
| ZMHH 2-Stage Magic Arm | Flexible positioning and reach | Dual-arm design for precise camera and phone angles |
| Lamicall Gooseneck Holder | Budget-friendly flex arm | Simple adjustable arm at an accessible price |
Best Phone Mounts for a Microphone Stand
1. Hercules DG207B Smartphone Holder
This is one of the strongest overall picks for mounting a phone to a microphone stand. It is built specifically for musicians and performers, with a secure grip and a clamp that fits standard mic stand tubing without extra adapters.
If you want something that feels solid and dependable for live use, this is the place to start.
2. Tackform Phone Holder for Mic Stand
The Tackform holder is a pro-grade option built from CNC-machined aluminum, which gives it a level of durability that plastic clamps cannot match. The spring-loaded cradle and metal ball-and-socket joint keep the phone locked in place without rattling, even during a loud set or a long recording session.
This is a strong pick for studio recording and live performers who want equipment that holds up night after night.
Recommendation: If you plan to touch your phone frequently for lyrics, controls, or chat, skip the cheapest clamps. A stronger grip and a metal joint make a noticeable difference in stability.
3. ZMHH 2-Stage Magic Arm Phone Holder
The ZMHH mount uses a two-section arm, an upper section built from nylon fiber and a lower section built from aluminum alloy, connected by three ball joints. That gives you far more reach and positioning control than a fixed clamp, which is useful when you need the phone offset from the microphone or angled toward a camera.
The super clamp base fits a wide range of mic stand tubing and other bars around a desk or stage, and the arm holds a listed capacity of up to 3.3 pounds, so it stays put once positioned.
4. Lamicall Gooseneck Phone Holder
This mount adds a flexible gooseneck arm at a lower price point, letting you position your phone where you want it without paying for the metal ball joints found on the Tackform or ZMHH options. It works well in tighter setups or when you need the phone slightly offset from the stand itself.
Keep in mind that gooseneck arms are best suited to lighter, occasional use rather than frequent tapping.
How to Attach a Phone Mount to a Mic Stand
- Attach the mount to the vertical shaft of the stand
- Position it slightly below eye level
- Tighten the clamp securely
- Insert the phone and test for stability
- Adjust the orientation to portrait or landscape as needed
Tip: Keep the phone slightly off to the side of the microphone so it does not block your face on camera.
Common Mistakes to Avoid
Mounting too high: a phone positioned above eye level blocks your face on camera and can partially block the microphone capsule, which affects both your video framing and your audio pickup.
Weak clamp: budget mounts with thin plastic jaws tend to loosen after repeated tapping, which shows up as a slow drift in the phone’s angle over the course of a set or a long recording session.
Using the boom arm: a phone mounted at the far end of a boom arm shifts the stand’s center of gravity, which can make lightweight tripod-base stands prone to tipping, especially if the arm is also holding a microphone.
Ignoring weight distribution: this matters most on lightweight tripod-base stands, where a phone mount high on the shaft combined with a heavy microphone can make the whole stand top-heavy. A wider, heavier round base helps offset this.
Frequently Asked Questions
Can any phone mount fit a microphone stand?
Most clamp-style mounts fit standard mic stand tubing, but always check the clamp’s stated diameter range against your stand before buying, since boom arms and tripod bases vary in thickness.
Should I mount my phone on the boom arm or the vertical shaft?
The vertical shaft is more stable for most setups. A boom arm can work with a very lightweight mount, but the added weight sitting out at the far end of the arm increases the risk of drift or tipping over time.
What is the best phone mount for recording video on a mic stand?
A mount with an adjustable arm, like the ZMHH 2-Stage Magic Arm, gives you more control over camera framing than a fixed clamp, which matters if you are recording video rather than just glancing at lyrics or notes.
Will a mic stand phone mount work with a case on my phone?
Most clamp and cradle style mounts accommodate slim to mid-size cases. Bulky cases may require removing the case or choosing a mount with a wider jaw opening.
Can I use the same mount for a tablet instead of a phone?
No. Tablets are heavier and wider than phones, and a mount rated for a phone will not hold a tablet securely on a mic stand. If you need to mount a tablet, look for a dedicated tablet-rated mic stand mount rather than stretching a phone clamp beyond its intended use.
Do I need a different mount for streaming versus live music performance?
Not necessarily, but the priorities shift. For live performance, prioritize a rigid, low-profile clamp that will not drift during a set. For streaming or recording, an adjustable arm that lets you fine-tune the camera angle, like the ZMHH 2-Stage Magic Arm, is often more useful since framing tends to matter more than in a quick glance-at-lyrics setup.
Bottom Line
The best phone mount for a microphone stand is a clamp-on holder attached to the vertical shaft. For most users, the Hercules DG207B offers the best balance of stability and ease of use. If you want a pro-grade build for studio work, the Tackform holder is worth the upgrade, and the ZMHH 2-Stage Magic Arm is the strongest choice when you need flexible positioning for video. Simpler clamps like the Lamicall gooseneck work fine for casual, lighter use.
Once your phone is mounted properly, it becomes one of the most useful tools in your entire setup, whether you are performing, recording, or streaming.
