Audi’s MMI display sits high and central on the A6 dash, which means most generic phone mounts either block a vent or end up too far from your eyeline to be useful for navigation. The right Audi A6 phone mount is one built for your specific model year, since the console layout changed significantly between the 2012-2018 generation and the 2019-2025 generation. Below are custom-fit picks for both generations, plus a universal cup holder option that works regardless of which A6 you drive.
Because the A6 shares its platform with the A7, S7, and RS7, the manufacturers of these mounts list those models as compatible too. This guide focuses on the A6 specifically.
| Mount | Best For | Years/Trim |
|---|---|---|
| JIEZMO Magnetic Mount | Fastest install, magnetic swap in and out | A6, S6, RS6: 2019-2025 |
| Masergogo Spring-Loaded Mount | Drivers who don’t want a magnet plate on their phone | A6: 2019-2025 / A6 Allroad, S6, S7: 2020-2025 / RS7: 2021-2025 |
| JIEZMO Magnetic Mount (C7) | Older A6 owners who want the same magnetic simplicity | A6, S6, RS6: 2012-2018 |
| LUNQIN Custom Mount | A budget-friendly alternative for the same generation | A6, S6, RS6 Allroad: 2012-2018 |
| APPS2Car Cup Holder Mount | Any A6 generation, no dash or console modification | Universal fit, all years |
Best Audi A6 Phone Mount for 2019-2025 Models
The current-shape A6 (2019-2025) runs a screen-adjacent console design across the A6, S6, RS6, A7, S7, and RS7 lineup, and both picks below are molded specifically for that dash rather than adapted from a generic bracket.
JIEZMO Magnetic Mount
This is a custom-fit magnetic mount built around the screen surround on the 2019-2025 A6 and its siblings. Because it mounts directly to the trim rather than a vent or cup holder, it sits close to eye level and keeps your phone visible without reaching across the console. Setup is a drop-in magnetic swap, which makes it one of the quicker mounts to live with day to day.
Masergogo Spring-Loaded Mount
If you’d rather not add a metal plate or ring to the back of your phone, this is the alternative. It uses a 3D-scanned custom base built for the A6/A7 (2019-2025), A6 Allroad/S6/S7 (2020-2025), and RS7 (2021-2025), paired with a spring-loaded clamp arm and a 17mm ball joint. The clamp opens with one hand, holds phones from 4.7 to 7.2 inches, and the base includes residue-free adhesive for a cleaner long-term install.
Best Audi A6 Phone Mount for 2012-2018 Models
The previous-generation A6, sold from 2012 through 2018 alongside the same-era S6, A7, S7, RS6, and RS7, has a different dash geometry than the newer cars, so mounts built for the 2019+ models will not fit here. Both options below are shaped for that earlier console.
JIEZMO Magnetic Mount
Same brand and same magnetic mounting concept as the newer-generation pick above, but molded to fit the 2012-2018 dash and screen surround instead. It gives owners of the older A6 the same quick magnetic attach and release without needing to adapt a universal mount to an awkward angle.
LUNQIN Custom Mount
A second custom-fit option for the same 2012-2018 generation, built for the A6, A7, S6, S7, RS6, RS7, and Allroad trims. It’s a straightforward alternative to the JIEZMO above if you want a second option to compare fit and finish against.
Universal Option: Cup Holder Mount
APPS2Car Magnetic Cup Holder Mount
If you don’t want anything attached to the dash or screen trim at all, or you’re not sure which generation bracket applies to a used A6 you just picked up, this cup holder mount works regardless of model year. It uses a tri-pivot adjustable arm with 17 N54 magnets and a 17mm ball joint, expands to fit 3 to 4 inch cup holders, and is MagSafe compatible for iPhone. It’s a solid fallback if a custom mount is backordered or you’d rather not commit to a permanent trim-mounted solution.
How to Choose the Right Mount for Your A6
Start by confirming which generation you have. The 2012-2018 A6 has a smaller, more upright screen set into the dash, while the 2019-2025 A6 uses a wider display flanked by climate touch panels below it. Custom mounts built for one generation will not fit the other cleanly, so match your model year before ordering.
Next, decide between magnetic and clamp mounting. Magnetic mounts are faster to use every day since you just tap the phone into place, but they require a small metal plate or ring on your phone or case. Clamp mounts hold the phone directly with no accessory needed on the phone itself, which some drivers prefer, especially with slim cases or phones that already have a MagSafe-style back.
If you’re driving a used A6 and aren’t sure of the exact production date, or you want a mount that will carry over to your next car, the cup holder option sidesteps the fitment question entirely since it doesn’t attach to the dash or screen trim. Owners cross-shopping other Audi models can see how the same tradeoff plays out in our Audi Q5 and SQ5 phone mount guide.
Frequently Asked Questions
Will a 2019-2025 A6 phone mount fit an S6 or RS6 of the same years?
Yes. Both the JIEZMO magnetic mount and the Auto Clamp mount above are built to fit the A6, S6, RS6, A7, S7, and RS7 that share the same dash and console design for their listed year ranges.
Do these mounts block any air vents?
No. Custom-fit mounts for the A6 attach to the screen trim or console area rather than the vents, so airflow is not affected.
What if I have a 2026 Audi A6?
The 2026 A6 is a full sixth-generation redesign with a new interior and larger 14.5 inch display, so the custom mounts above are not built for it. If you drive the redesigned 2026 model, the universal cup holder mount is the safer choice until model-specific options are confirmed available.
Can I use a magnetic mount without a MagSafe case?
Yes. The JIEZMO and APPS2Car mounts include a metal ring you can attach to a non-MagSafe case or directly to the phone for magnetic compatibility.
Related Reading
For more Audi-specific mounting guides, see our picks for the Audi Q3, the Audi Q8, SQ8 and RS Q8, and the Audi A3.
