The Mazda CX-70 is close enough to its three-row sibling, the CX-90, that the two share a dash, a center console, and the same core mounting problem: a deep console, a floating infotainment screen, and vents that sit lower than most drivers expect. Because the CX-70 launched as a companion model rather than a standalone redesign, the custom mount market for it is thin, and what does exist is sold as fitting both vehicles rather than the CX-70 alone. Below, we’ve put together a Mazda CX-70 phone mount guide covering both the custom-fit options and the universal alternatives worth considering.
Below we cover both custom options built for the shared CX-70/CX-90 dash, along with two universal mounts that skip the fitment question entirely if neither custom pick feels right for your setup.
Mazda never offered a factory phone mount for the CX-70, so every option here comes from a third-party manufacturer. That’s typical across the industry, since automakers design cabins around infotainment screens and climate controls rather than phone placement. What makes the CX-70 a bit unusual is that it launched as a badge-engineered companion to an existing model rather than an entirely new platform, which is exactly why the aftermarket mount selection leans so heavily on shared CX-90 compatibility instead of standing on its own. That’s actually a benefit for CX-70 shoppers: instead of waiting a model year or two for manufacturers to catch up the way new platforms usually require, the CX-70 inherited a mount market that was already maturing on the CX-90 side.
Because the CX-70 shares its platform with the Mazda CX-90, most custom mounts on the market are sold to fit both vehicles rather than one or the other. That’s good news for CX-70 owners, since it means the mount selection is really the CX-90’s, not a separate, smaller pool built just for this model.
Mazda CX-70 Phone Mount Comparison Table
| Mount | Best For | Years/Trim |
|---|---|---|
| Wincar MagSafe Charging Mount | Custom fit, wireless charging | CX-70/CX-90, 2025+ |
| Lunqin Screen-Adjacent Mount | Custom fit, non-magnetic cradle | CX-70/CX-90, 2025+ |
| WEKEFON Suction Charging Mount | Strongest hold, wireless charging | All CX-70 years |
| HyperGear MagSafe Vent Mount | Simple universal vent mount | All CX-70 years |
Wincar MagSafe Charging Mount for Mazda CX-70
The Wincar is built around the shared CX-70/CX-90 dash and combines a custom-fit base with a 15W wireless charging puck, so mounting and charging happen in the same motion for MagSafe-compatible phones. Because it’s shaped to the vehicle’s specific console layout rather than clamped onto a generic surface, it sits closer to the trim and looks less like an aftermarket add-on than a universal charging mount would.
Phones without a MagSafe case need the included metal ring, and wireless charging speed depends on keeping the phone properly aligned with the coil, so it’s worth double-checking placement the first few times you dock the phone. Because the base is molded to the shared CX-70/CX-90 console rather than gripping a smooth surface with suction, it also tends to hold its position more consistently over time than a generic dash mount would.
Lunqin Screen-Adjacent Mount for Mazda CX-70
The Lunqin takes a different approach, leaning into screen-adjacent placement rather than magnets. It positions the phone right next to the CX-70’s infotainment display, which keeps your eyes closer to a single focal point instead of glancing between two separate areas of the dash. The cradle is mechanical rather than magnetic, so it holds any phone regardless of case thickness or MagSafe compatibility.
That makes it the safer custom pick for drivers who haven’t switched to MagSafe or who share the vehicle with someone running an older phone. Like the Wincar, it’s sold as fitting both the CX-70 and CX-90, since the two vehicles use the same dash and console. The mechanical cradle also closes automatically around the phone, so there’s no clamp to squeeze shut while you’re trying to keep your eyes on the road.
WEKEFON Suction Charging Mount (Universal)
If neither custom option fits your exact trim or you’d rather not commit to a vehicle-specific bracket, the WEKEFON is the strongest universal alternative for the CX-70. It mounts to the dash or windshield using a reinforced suction base rated for 120 pounds of holding force, and it doubles as a 15W wireless charger for MagSafe-compatible phones.
Because it’s not molded to any specific dash, it works regardless of trim or model year, and the same mount will still work if you ever trade the CX-70 for something else. The magnet strength is also noticeably stronger than most budget mounts, which matters given the CX-70’s firm, sport-tuned ride. Reapplying the suction pad every six to twelve months keeps the hold consistent, particularly if the mount lives somewhere that gets direct sun.
HyperGear MagSafe Vent Mount (Universal)
For a simpler, lower-cost universal option, the HyperGear clips onto the CX-70’s center air vent and holds the phone magnetically. It’s not as heavy-duty as the WEKEFON’s suction base and it doesn’t charge, but it’s a solid pick for anyone who just wants a reliable spot to dock their phone without paying for a charging mount they may not need.
The included adapter ring covers phones without MagSafe, and because it clips to the vent slats rather than the dash, installation takes under a minute with no surface prep required. It’s also the easiest of the four to move to a rental car or a second vehicle, since there’s nothing permanent about a vent clip.
How to Choose the Right Mazda CX-70 Phone Mount
Start with whether a factory-look fit matters to you. The Wincar and Lunqin both look closer to a built-in accessory since they’re shaped around the shared CX-70/CX-90 console rather than clamped onto it. If either doesn’t seat cleanly in your specific trim, a universal suction mount will always work regardless of year. For most drivers, the decision comes down to how much you value that tailored appearance versus the flexibility of a mount that isn’t tied to one vehicle.
Because the CX-70 and CX-90 share a dash, most listings for this vehicle cover both models in one product page. Read the compatibility notes carefully anyway, since minor trim variations between the two can occasionally affect fit even on a shared-dash mount.
Next, decide between a magnetic mount and a mechanical cradle. The Wincar and WEKEFON are faster to use one-handed and add wireless charging, but both depend on a MagSafe case or the included adapter ring for full compatibility. The Lunqin and HyperGear’s included adapter ring cover any phone regardless of case, which is the safer bet if you’re not fully committed to MagSafe yet. If you switch phones frequently or share the vehicle with a passenger running an older device, a cradle-style mount sidesteps the compatibility question entirely.
Finally, think about charging. If you already have a wireless charging pad elsewhere in the CX-70, a non-charging mount like the Lunqin or HyperGear keeps things simple. If you’d rather consolidate mounting and charging into one spot, the Wincar or WEKEFON does both at once, which cuts down on cables running across the console.
If you’re buying a used CX-70, it’s worth checking whether a previous owner already installed a mount before you order a new one, particularly around the vent area. Leftover clips or adhesive residue can make it harder for a new custom mount to seat cleanly, so a quick inspection and cleaning of the mounting area is worthwhile before anything ships. This is a small step, but it’s an easy way to avoid returning a mount that would have fit fine on a clean surface.
Owners cross-shopping the CX-70 against Mazda’s smaller SUVs should know the Mazda CX-50 and Mazda CX-5 each have their own separate mount lineups, since neither shares a dash with the CX-70 the way the CX-90 does.
Frequently Asked Questions
Do CX-90 mounts really fit the CX-70?
Yes, in most cases. The two vehicles share the same platform, dash, and console layout, so manufacturers typically sell one mount as compatible with both rather than producing separate versions.
Do I need a MagSafe case for the Wincar or WEKEFON mounts?
No. Both include a metal plate for phones without a MagSafe case, though a genuine MagSafe case gives a stronger and more consistent hold.
Will a suction mount damage the CX-70’s dash or windshield?
No, as long as the surface is clean before application. The WEKEFON is designed to be removed and repositioned without leaving residue.
Is a custom mount worth it over a universal one in the CX-70?
It depends on how much you value a factory-look fit. The custom options sit closer to the trim and look more integrated, but the universal picks are just as functional and offer more flexibility if you ever change vehicles. Neither approach is objectively wrong, so it comes down to whether appearance or flexibility matters more for your daily driving.
