The Mazda CX-50’s dash sits lower and further away than the CX-5’s, and the vents run in a wide horizontal strip instead of the round cutouts most third-party mounts are designed around. That combination has kept the custom mount market thin. As of this writing there are exactly two purpose-built options for the CX-50, and both take a different approach to solving the same problem.
Below we cover both custom mounts along with three universal alternatives, so whichever direction you go, you’ll come away with a Mazda CX-50 phone mount that actually fits your setup. If you’d rather not gamble on a snap-on bracket matching your exact trim, the universal picks are just as viable for daily use, and in some cases easier to live with since they aren’t tied to a single dash contour that could change between model years.
Mazda never offered a factory phone mount for the CX-50, so every option here comes from a third-party manufacturer. That’s typical across the industry: automakers design cabins around infotainment screens and climate controls, not phone placement, which is why the aftermarket mount market exists in the first place. What varies from vehicle to vehicle is how much room third-party manufacturers have to work with, and the CX-50’s dash gives them less than the Mazda 3 or the larger Mazda CX-90, both of which have had more time on the market for third-party manufacturers to build tooling around.
The CX-50’s custom mount selection is thin compared to Mazda siblings like the Mazda CX-5 and Mazda CX-30, both of which have a deeper lineup of vehicle-specific brackets to choose from. Until more manufacturers catch up to the CX-50’s dash, a universal mount is a safer bet for most buyers. Universal mounts install in under a minute, work across every CX-50 trim and model year, and move with you if you ever change vehicles.
Mazda CX-50 Phone Mount Comparison Table
| Mount | Best For | Years/Trim |
|---|---|---|
| WUJZ Snap-On Mount | Factory-look custom fit, no adhesive | CX-50, 2022+ |
| BEERTE MagSafe Mount | Wireless MagSafe convenience | CX-50, 2023+ |
| VANMASS Magnetic Mount | Strongest magnetic hold, universal fit | All CX-50 years |
| iOttie Easy One Touch Advanced | Case-friendly clamp, no magnets needed | All CX-50 years |
| eSamcore Cup Holder Mount | Keeping the vents and dash completely clear | All CX-50 years |
WUJZ Snap-On Mount for Mazda CX-50
This is the closer of the two custom options to a true factory-fit accessory. It’s built to snap into the CX-50’s dash without adhesive, screws, or any modification to the vehicle, which means it comes out just as cleanly if you ever sell the car. Because it’s molded to the CX-50’s specific dash contour, the phone sits closer to eye level than most vent or cup holder mounts allow, and there’s no bracket arm swinging into view.
The tradeoff with any snap-on custom mount is fit tolerance. Cabin trim can vary slightly between production runs, so it’s worth reading current buyer photos before ordering if your CX-50 is a newer model year not yet well represented in reviews. The upside of a snap-on design over an adhesive one is reversibility: if the fit isn’t right, removal takes seconds and leaves nothing behind, which isn’t true of mounts that rely on foam tape or epoxy pads.
Because the bracket clips into an existing seam rather than gripping a smooth surface, it also tends to hold its position better over time than a suction-based alternative. Suction mounts can lose grip in extreme heat or cold, especially on textured dash plastic. A snap-on mount doesn’t have that failure mode since there’s no vacuum seal to maintain.
BEERTE MagSafe Mount for Mazda CX-50
The BEERTE takes the wireless route. It’s a MagSafe-specific bracket shaped to fit the CX-50’s dash, so if you already run a MagSafe case or ring, mounting the phone is a single motion with no clamp to squeeze. The tradeoff is the same one every MagSafe mount carries: phones without a MagSafe case need an added metal plate, and the hold is only as strong as the magnet, so it’s worth testing over rough roads before relying on it for anything you can’t afford to drop.
For CX-50 owners who already live in the Apple ecosystem and want the cleanest possible mounting motion, this is the pick. It also tends to sit lower profile than a clamp-style mount, since there’s no cradle or side arms extending outward, which keeps more of the dash visible around it.
Android owners can still use it with the included metal ring, though the experience won’t feel quite as smooth as it does for an iPhone with a native MagSafe case, since Android magnetic charging standards vary by manufacturer.
VANMASS Magnetic MagSafe Mount (Universal)
If neither custom option fits your trim or model year, the VANMASS is the strongest universal alternative we’d point CX-50 owners toward. It mounts to the dash, windshield, or vent using a reusable suction base, and it’s compatible with MagSafe cases as well as standard phones through an included metal ring. The magnet array is noticeably stronger than most mounts in this price range, which matters on a vehicle with the CX-50’s slightly firmer ride.
Because it’s a suction mount rather than a molded bracket, placement is entirely up to you, so you can position it wherever the CX-50’s dash geometry works best for your sightline. Most owners land on either the lower windshield, just above the dash line, or a flat section of the dash itself near the base of the infotainment screen.
Reapplying the suction pad every six to twelve months keeps the hold consistent, particularly if the mount lives somewhere that gets direct sun. A quick wipe with rubbing alcohol before reapplying resets the grip almost to new.
iOttie Easy One Touch Advanced (Universal)
Not every driver wants a magnet near their phone, and not every phone case is MagSafe-compatible. The iOttie solves that with a mechanical clamp: press your phone into the cradle and the arms close automatically, no case removal or metal plate required. It’s a suction mount as well, so it works on the CX-50’s windshield or dash the same way the VANMASS does.
This is the pick for anyone running a thick case, a wallet case, or a phone that doesn’t play well with magnetic holders. The extending arm also gives more reach than a fixed magnetic puck, which matters if your preferred mounting spot on the CX-50’s dash is further from the vent line than you’d like.
The one habit worth building with any clamp mount is checking the cradle’s grip periodically. The plastic release mechanism can loosen slightly after heavy daily use over a year or more, though it’s a five-minute fix covered under most manufacturer warranties.
eSamcore Cup Holder Mount (Universal)
For drivers who’d rather keep the dash and vents completely untouched, a cup holder phone mount is the third path. The eSamcore twists into either of the CX-50’s front cup holders and locks in place without adhesive, then extends up to phone level with an adjustable neck. It’s a complete standalone unit, not a component you’d need to pair with anything else, and it leaves the dash entirely clear.
The obvious tradeoff is losing a cup holder to the mount, which matters if you regularly use both front holders. For CX-50 drivers with a center console cup holder to spare, it’s a clean solution. The 15-inch height also puts the phone closer to eye level than shorter cup holder mounts on the market, which tend to sit too low for a quick glance at navigation without looking away from the road for longer than you’d like.
Because the mount clamps into the cup holder rather than the cup holder itself, it works equally well in either the driver or front passenger holder, which makes it a reasonable option for rideshare or delivery drivers who need the phone visible from the passenger side during a shift.
How to Choose the Right Mount for Your CX-50
Start with whether a factory-look fit actually matters to you. If it does, the WUJZ or BEERTE are worth trying first, since both are built around the CX-50’s specific dash contour rather than a generic curve. If either doesn’t fit your model year cleanly, a universal suction or cup holder mount will always work regardless of trim. Owners cross-shopping the CX-50 against the CX-5 should know the mounting decision looks different in each vehicle: the CX-5’s dash accepts several more custom brackets than the CX-50 currently does.
Custom snap-on mounts rely on tight tolerances between the bracket and the dash trim. Check current buyer photos and questions on the listing for your exact CX-50 trim and model year before ordering, since minor dash variations between production runs can affect fit.
Next, decide between magnetic and clamp mounting. MagSafe mounts like the BEERTE and VANMASS are faster to use one-handed but depend on magnet strength and case compatibility. A clamp mount like the iOttie holds any phone regardless of case thickness but takes an extra second to load and release.
Finally, consider where you actually want the phone. Dash and vent mounts keep it near your natural sightline but occupy space near the CX-50’s HVAC controls. A cup holder mount clears that area entirely at the cost of a cup holder.
Frequently Asked Questions
Does the WUJZ mount work on every CX-50 trim?
It’s designed for the standard CX-50 dash layout across trims, but minor variations between production runs can affect fit. Check current buyer feedback for your specific model year before ordering.
Do I need a MagSafe case for the BEERTE or VANMASS mounts?
No. Both include a metal plate for phones without a MagSafe case, though a genuine MagSafe case will give a stronger and more consistent hold.
Will a suction mount damage the CX-50’s dash or windshield?
No, as long as the surface is clean before application. Reusable suction mounts like the VANMASS and iOttie are designed to be removed and repositioned without residue.
Can I use a cup holder mount and a dash mount at the same time?
Yes. Some CX-50 owners run a cup holder mount for daily driving and keep a suction mount as a backup for passengers or a second device, though most drivers only need one.
