Choosing the right Garmin Zumo XT mount, Garmin Zumo XT2 mount, or Garmin Zumo XT3 mount depends on your motorcycle’s cockpit layout, how much open handlebar space you have left, and whether you plan to leave the navigator on the bike during fuel stops or move it into a car. While Garmin includes a standard U-bolt handlebar kit in the box, crowded adventure bars, clip-on sport-touring helms, second motorcycles, and theft concerns often call for additional or specialized mounting hardware.

Quick Answer: For most riders outfitting a primary or second motorcycle, the official Garmin Handlebar Mount Kit is the easiest all-around setup. If your handlebars are crowded or you ride a bike with clip-ons, choose the BRCOVAN Fork Stem Base for centered sport-touring placement, the Tackform Mirror Mount for adventure bikes with M10 mirror bolts, or the TUSITA Brake/Clutch Reservoir Mount to anchor at your control perch. For anti-theft security on any XT, XT2, or XT3, add the keyed MotoPumps Locking Security Mount.
One distinction matters before ordering any hardware: the Zumo XT, Zumo XT2, and Zumo XT3 each use a model-specific powered cradle, so you cannot snap a newer XT2 or XT3 into an original XT cradle. However, the motorcycle-side mounting hardware behind the cradle uses the industry-standard 4-hole AMPS hole pattern (30mm by 38mm) and 1-inch (25.4mm) ball joints, meaning your existing bases, socket arms, and AMPS plates from Garmin, RAM Mounts, and other 1-inch ball systems can carry over when you upgrade your GPS. For broader wiring and cockpit placement fundamentals, see our guide on how to mount a motorcycle GPS, or browse our main motorcycle GPS mounts hub.
Best Garmin Zumo XT Mount Options Compared (XT, XT2, and XT3)
Use the comparison table below to match your motorcycle cockpit or car setup to the right mounting hardware for the Zumo XT, Zumo XT2, and Zumo XT3.
| Mount | Best For | Fits / Attachment |
|---|---|---|
| Garmin Handlebar Mount Kit | Most motorcycles & second-bike setups | Tubular handlebars & control perches (1″ ball + 4-hole AMPS plate) |
| BRCOVAN Fork Stem Mount Base | Centered sport & sport-touring placement | Hollow fork stem bores 12mm to 25.4mm (isolated 1″ B-size ball base) |
| Tackform 20 Series Mirror Mount | BMW GS & adventure bikes with crowded bars | M10 or 3/8″ mirror bolt hole (complete 20mm ball arm + AMPS plate) |
| TUSITA Brake/Clutch Reservoir Mount | Mounting near controls without a bar clamp | Brake or clutch reservoir perch bolts (base + short B-size socket arm) |
| MotoPumps Locking Security Mount | Keyed anti-theft protection during stops | Fits Garmin Zumo XT, XT2, and XT3 cradles via standard AMPS pattern |
| Garmin Automotive Mount Kit (XT / XT2) | Using a Zumo XT or XT2 in a car or truck | Windshield suction cup (or 17mm cup holder base) + 12V vehicle cable |
Zumo XT3 owners: The Garmin Zumo XT3 joined the lineup in 2026 in both 4.7-inch and 6-inch display sizes. While the XT3 motorcycle cradle still bolts to standard 4-hole AMPS mounting plates, its powered cradle is specific to the XT3 and Garmin does not currently offer a dedicated automotive suction kit for the XT3.
Zumo XT vs. XT2 vs. XT3 Mount Compatibility at a Glance
Before replacing any hardware on your motorcycle, separate the Garmin powered cradle (which snaps onto the back of the GPS and connects to your 12V battery harness) from the motorcycle-side mounting bracket (the AMPS plate, socket arm, and handlebar or frame base). Here is how compatibility breaks down across all three generations:
| Component | Zumo XT (5.5″) | Zumo XT2 (6.0″) | Zumo XT3 (4.7″ & 6.0″) |
|---|---|---|---|
| Motorcycle powered cradle | XT-specific dock | XT2-specific dock | XT3-specific dock |
| 4-hole AMPS pattern (30mm x 38mm) | Yes | Yes | Yes |
| 1″ (B-size) bases and socket arms | Reusable | Reusable | Reusable with XT3 cradle attached |
| Dedicated automotive mount kit | Yes (XT car kit) | Yes (XT2 car kit) | No dedicated kit available |
| Are cradles interchangeable? | No. Always match the powered cradle and power cable to your exact Zumo generation. | ||
If you are upgrading from an original Zumo XT to a Zumo XT2 or Zumo XT3, you do not need to strip your existing 1-inch ball base, double-socket arm, or 4-hole AMPS plate off the motorcycle. Unbolt the old cradle from the four AMPS screws, bolt the new model-specific Garmin cradle onto the same AMPS plate, and route the matching 12V power cable. Likewise, if you are outfitting a second motorcycle so you can swap one Zumo unit between two bikes, you simply need a second model-specific Garmin powered cradle and 12V wiring harness paired with any of the AMPS-compatible motorcycle mounts below.
Garmin Zumo XT, XT2, and XT3 Motorcycle Mount Options
1. Garmin Handlebar Mount Kit: Best Overall for Most Motorcycles and Second Bikes
Best for: Most riders with exposed tubular handlebars or riders outfitting a second motorcycle with OEM Garmin hardware.
Mounting location: Round handlebars and control perches.
System: Garmin 1-inch (25.4mm) ball base, short double-socket arm, and 4-hole AMPS plate (compatible with 1-inch RAM B-size components).
The official Garmin Handlebar Mount Kit (Garmin part 010-10962-10) is the cleanest factory solution when you are setting up a second motorcycle or replacing worn mounting hardware. Manufactured by Garmin rather than RAM, this kit uses Garmin’s own cast-metal 1-inch (25.4mm) ball-and-socket architecture, bundling a U-bolt handlebar and control-perch base, a short metal double-socket arm, and a rectangular 4-hole AMPS plate with integrated 1-inch ball and mounting screws in one box. Note that the model-specific powered Zumo cradle is sold separately.
Because Garmin engineered this kit around the industry-standard 1-inch (25.4mm) ball size and the 30mm by 38mm AMPS hole pattern, its parts are cross-compatible with 1-inch B-size arms and bases from RAM Mounts and BRCOVAN. If you later upgrade from a Zumo XT to a Zumo XT2 or XT3, the entire handlebar base, socket arm, and AMPS plate stay on your motorcycle while only the plastic GPS cradle changes.
A handlebar installation also makes it easy to pivot the Zumo for glare or clearance if you later add a tank bag, heated-grip controller, smartphone mount, or action camera. Unless your handlebars are completely enclosed by bodywork or clip-ons, this factory Garmin kit is the most practical place to start.
2. BRCOVAN Fork Stem Mount Base: Best for Centered Sport and Sport-Touring Placement
Best for: Riders on sport and sport-touring motorcycles with clip-on bars who want the Zumo centered over the triple tree.
Fits: Open cylindrical fork stem bores measuring 12mm to 25.4mm (0.47 to 1.0 inch) in internal diameter.
System: Isolated 1-inch B-size ball expansion base (pairs with a 1-inch socket arm and AMPS plate).
When clip-on handlebars or crowded riser clamps leave nowhere to fit a U-bolt, a fork stem mount puts your Zumo in the cleanest position on the bike: dead-center over the steering head. The BRCOVAN aluminum expansion plug drops into the open center bore at the top of the fork stem and tightens with an Allen key, expanding internal metal sleeves against the steering tube walls and outputting a rigid 1-inch B-size TPU ball at the top.
Mounting at the steering axis keeps the weight of a 6-inch Zumo XT2 or XT3 centered between your hands rather than hanging off one side of the bars. It also provides a natural downward sightline just below your instrument cluster that stays clear of the tank and fairing at full left and right steering lock. Before ordering, pop off your bike’s center steering nut cover to confirm your motorcycle has an open cylindrical stem bore between 12mm and 25.4mm (note that many BMW Telelever and Duolever models have sealed steering heads and should use a mirror or reservoir mount instead).
What to buy: This listing is for the isolated BRCOVAN fork stem ball base. If you are relocating an existing Garmin handlebar setup, your current 1-inch double-socket arm and AMPS plate will clamp right onto this ball. If you are building a complete second-bike rig from scratch, add a compatible B-size 1-inch double-socket arm and a BRCOVAN 4-hole AMPS square ball plate.
3. Tackform 20 Series Mirror Mount: Best Complete Kit for BMW GS and Adventure Bikes
Best for: BMW GS, adventure, and touring riders who want to keep the center handlebar open and get the base, arm, and AMPS plate in one box.
Fits: Motorcycle mirror stems with M10 (10mm) or 3/8-inch mounting bolts.
System: Complete Tackform 20 Series CNC aluminum assembly (through-hole mirror base, 20mm ball arm, and 4-hole AMPS plate).
Anchoring at the mirror stem base is one of the smartest ways to keep a heavy 5.5-inch or 6-inch Zumo high in your peripheral sightline without clamping another bracket around tapered handlebars. The Tackform 20 Series Motorcycle GPS Mount uses a CNC-machined billet aluminum through-hole tab that slips underneath your existing M10 or 3/8-inch mirror mounting bolt, allowing the mirror and the GPS mount to share the same threaded perch without removing your mirror.
Unlike isolated ball bases that require separate shopping for arms and adapter plates, this Tackform package is a complete base-to-AMPS kit. It includes the through-hole mirror base, a short locking socket arm with dual ball joints, and a pre-drilled 4-hole AMPS bracket ready to bolt straight onto your Garmin Zumo XT, XT2, or XT3 cradle. This layout works exceptionally well on BMW GS, Triumph Tiger, and Kawasaki Versys motorcycles where the mirror perch positions the screen high and clear of a tank bag.
Keep one sizing detail in mind: Tackform’s 20 Series uses precision 20mm metal balls rather than the 1-inch (25.4mm) balls used by Garmin, RAM, and BRCOVAN. Because the mirror base, arm, and AMPS plate are all included together in this box, you do not need any extra adapters to mount your Garmin cradle, though the 20mm arm will not cross-mate with 1-inch balls.
4. TUSITA Brake and Clutch Reservoir Mount: Best Control-Perch Option
Best for: Touring, cruiser, and adventure riders who want the Zumo positioned near the left or right hand controls without wrapping a clamp around the bar.
Mounting point: Brake or clutch master cylinder reservoir cover or perch bolts.
Includes: Powder-coated aluminum reservoir base, bolts/spacers, and a short B-size (1-inch ball) double-socket arm.
When your handlebars are enclosed by plastic covers, cast in a non-round shape, or already packed with phone holders, auxiliary light switches, and heated-grip controllers, the TUSITA Brake and Clutch Reservoir Mount creates a dedicated anchor point right at the master cylinder perch. It replaces your existing brake or clutch clamp bolts using supplied stainless fasteners and spacers, placing a 1-inch B-size ball cleanly above or beside the control housing.
A major value advantage of this TUSITA kit is that it includes both the reservoir mounting base and a short B-size double-socket arm in the box. That short arm is ideal for heavy navigators like the Zumo XT2 and 6-inch XT3 because it keeps the screen tucked close to the control perch and minimizes lever-arm vibration over rough pavement. To finish the installation, clamp the open end of the TUSITA arm onto the 1-inch AMPS ball plate that came with your Garmin Zumo (or pair it with the BRCOVAN AMPS square ball plate for a second bike).
Check your bike first: Brake and clutch reservoir bolt spacing and master cylinder shapes vary across motorcycle brands. Confirm the bolt-center spacing on your perch and verify that the mounted Zumo clears your windshield and fairing at full steering lock before ordering.
Locking Security Mount for the Garmin Zumo XT, XT2, and XT3
Garmin’s factory motorcycle cradle holds the GPS firmly over potholes and off-road washboard, but its top push-button latch is unkeyed. Anyone walking past your parked motorcycle can press the release tab and unclip an expensive navigator in two seconds. If you want to leave your Zumo mounted while running into a gas station, restaurant, or scenic overlook, adding a keyed locking bracket solves that vulnerability.
5. MotoPumps Locking Security Mount: Best Keyed Anti-theft System for XT, XT2, and XT3
Best for: Riders who want keyed theft deterrence during fuel and meal stops without unclipping and pocketing the GPS every time they dismount.
Compatibility: Fits the Garmin Zumo XT, Zumo XT2, and Zumo XT3 (both 4.7-inch and 6-inch XT3 versions).
Security: Keyed stainless and Delrin security mechanism that blocks the Garmin cradle release button when locked.
The MotoPumps Locking Security Mount stands out because a single design accommodates the Garmin Zumo XT, Zumo XT2, and Zumo XT3 rather than forcing you to buy an expensive new security cage if you upgrade your GPS later. The bracket sandwiches neatly between your 4-hole AMPS mounting plate and your factory Garmin powered cradle using the standard 30mm by 38mm AMPS bolt holes.
When you turn the key, a low-profile locking bar physically blocks the push-button release latch on top of the Garmin cradle so the GPS cannot be popped out of the dock. Because the lock sits directly behind the cradle, it adds very little bulk or weight compared to full wrap-around metal cages. MotoPumps offers the standalone security lock for riders who already own a handlebar or ball mount, as well as complete bundles with replacement anti-theft security knobs for socket arms.
Fitment note: Locking hardware sandwiches between your AMPS plate and the Garmin cradle and extends slightly above the top release tab. Check clearance around your existing socket arm, windscreen adjustment mechanism, and instrument visor before ordering. Note that Touratech also manufactures keyed locking mounts for Garmin Zumo units, though Touratech cages are generation-specific and size-specific.
Using the Garmin Zumo XT or XT2 in a Car or Truck
One underrated advantage of the Garmin Zumo XT and Zumo XT2 is that both units include full street turn-by-turn navigation and can double as dedicated automotive GPS navigators in your car, pickup truck, or RV. Rather than unbolting your hardwired motorcycle cradle, you use a model-specific automotive dock and 12V vehicle power cable.
6. Garmin Automotive Mount Kit (Plus 17mm Cup Holder Option)
Best for: Moving your Garmin Zumo XT or Zumo XT2 between your motorcycle and a car, truck, or camper.
Zumo XT & XT2: Dedicated model-specific Garmin automotive suction cup and 12V power kits available.
Zumo XT3: No dedicated Garmin automotive mount kit is currently offered.
Garmin’s automotive mount kits include a snap-in unpowered car cradle, a windshield suction cup base, and a 12V cigarette-lighter vehicle power cable. Because the Zumo XT and Zumo XT2 have different chassis contours and rear latch geometry, their automotive cradles are not interchangeable. Make sure you order the exact kit that matches your unit using the two buttons below.
If you prefer to keep your windshield completely clear or drive in a state that restricts windshield suction mounts, you also have an easy console upgrade: the Garmin automotive cradle snaps onto a standard Garmin 17mm ball socket. You can pop the factory windshield suction arm off the back of the car cradle and snap the cradle directly onto a 17mm ball car cup holder mount, positioning your Zumo securely in the center console without touching the glass.
Why is there no Zumo XT3 car kit? Although the Zumo XT3 owner’s manual mentions automotive use, Garmin support explicitly states that the Zumo XT3 does not have a dedicated automotive mount kit. Riders who want to use a Zumo XT3 inside a truck or car would need to install a second XT3 motorcycle cradle on a 1-inch ball dash or suction base and wire it to 12V power.
View Zumo XT Car Kit on Amazon →
View Zumo XT2 Car Kit on Amazon →
Frequently Asked Questions
Are Garmin Zumo XT, XT2, and XT3 mounts interchangeable?
Not the powered cradles themselves. The Zumo XT, Zumo XT2, and Zumo XT3 each require their own model-specific Garmin cradle and power cable. However, all three cradles use the exact same 4-hole AMPS mounting pattern (30mm by 38mm) on the back, so your motorcycle-side 1-inch ball base, double-socket arm, and AMPS plate can be reused across all three generations.
What do I need to mount a Garmin Zumo XT, XT2, or XT3 on a second motorcycle?
To move one Zumo unit easily between two motorcycles, you need two things on the second bike: a model-specific Garmin replacement motorcycle cradle with its 12V power harness, and a motorcycle-side mounting setup such as the Garmin Handlebar Mount Kit (#1) or any 4-hole AMPS plate, socket arm, and fork stem, mirror, or reservoir base.
Can I reuse my old Zumo 390LM, 395LM, or 396LMT-S mount with a Zumo XT, XT2, or XT3?
You can reuse the motorcycle-side 1-inch ball base, double-socket arm, and 4-hole AMPS diamond or square plate, then bolt the new XT, XT2, or XT3 cradle onto that existing AMPS plate. If you are upgrading from an older 390-series navigator, see our dedicated Garmin Zumo 390LM, 395LM, and 396LMT-S mount guide.
What is the AMPS mounting pattern on a Garmin Zumo?
AMPS is an industry-standard 4-hole rectangular bolt pattern measuring 30mm by 38mm (1.181 inches by 1.496 inches) center-to-center. Because Garmin molds the AMPS pattern into the back of every Zumo motorcycle cradle, you can bolt the cradle directly to mounting plates from Garmin, RAM Mounts, BRCOVAN, Tackform, TUSITA, and MotoPumps. For full dimensions and hardware pairings, read our AMPS mounting pattern guide.
What is the best Garmin Zumo mount for a BMW GS or RT motorcycle?
On a BMW GS or Adventure model, the Tackform 20 Series Mirror Mount (#3) and the Garmin Handlebar Mount Kit (#1) are two of the cleanest options. On a BMW RT or K1600 touring bike with cast split handlebars, the TUSITA Brake and Clutch Reservoir Mount (#4) anchors neatly at the control perch. For more model-specific setups, visit our BMW motorcycle mount guide.
Does the Garmin Zumo lock to the motorcycle out of the box?
No. The factory Garmin motorcycle cradle holds the GPS securely over rough terrain while riding, but the top release button does not have a key lock. Adding an aftermarket system like the MotoPumps Locking Security Mount (#5) blocks access to the release button with a keyed latch so you can leave the unit on the bike during short stops.
Does the MotoPumps security lock fit the new Garmin Zumo XT3?
Yes. MotoPumps confirms that its keyed security mount fits the Garmin Zumo XT, Zumo XT2, and both screen sizes (4.7-inch and 6-inch) of the Zumo XT3 using the standard 4-hole AMPS mounting interface.
Is there a Garmin Zumo XT3 automotive mount kit for cars?
No. While Garmin sells dedicated automotive suction and 12V power kits for the Zumo XT and Zumo XT2, Garmin states that an automotive mount kit is not available for the Zumo XT3.
Which Garmin Zumo Mount Should You Buy?
For most motorcycles, the official Garmin Handlebar Mount Kit is the most flexible place to start or to outfit a second bike. If your handlebars are crowded or you ride a sport-tourer with clip-ons, choose the BRCOVAN Fork Stem Base for a centered triple-tree setup, the complete Tackform 20 Series Mirror Mount for an M10 mirror perch on an adventure bike, or the TUSITA Reservoir Mount to anchor at your brake or clutch controls.
If theft deterrence during fuel and lunch stops is a priority, sandwich the keyed MotoPumps Locking Security Mount between your AMPS plate and your XT, XT2, or XT3 cradle. For riders who also want to run a Zumo XT or XT2 on the road in a pickup or car, pick up the matching Garmin Automotive Mount Kit (and pair it with the 17mm cup holder base if you want the screen off the windshield). If you are outfitting additional bikes in your garage, explore our motorcycle GPS mounts hub and our main motorcycle mounts hub for more guides by brand and riding style.