Finding the right Subaru Impreza phone mount depends heavily on which generation you own. The 2017-2023 Impreza runs a conventional dashboard with narrow vertical vents, while the 2024-2026 redesign shifted to a portrait touchscreen layout that changes where a mount can actually sit. Generic mounts built for horizontal vent slats tend to slip on Subaru’s vertical design, so the options below are either purpose-built for the Impreza or flexible enough to work regardless of trim.
We tested five mounting approaches for the Impreza: a genuine Subaru cup holder accessory, two vent-specific mounts built for the older body style, a dashboard-mounted clamp designed around the newer dashboard, and a universal suction mount that works as a fallback on either generation.
| Mount | Best For | Years/Trim |
|---|---|---|
| Genuine Subaru Cup Holder Mount | OEM Fit, No Modification | 2017-2026, All Trims |
| YEGZA Dashboard Lock and Release Mount | Custom Dash Fit, Newer Dash | 2024-2026 |
| CUSTOMish Exact-Fit Air Vent Mount | No-Drill Vent Install, Preserves Airflow | 2017-2023 |
| Course Motorsports DirectFit Mount | Factory-Hardware Mount, Magnetic | 2017-2023 |
| OQTIQ Suction Cup MagSafe Mount | Universal Backup, Any Year | All Years |
Genuine Subaru Cup Holder Phone Mount
If you want a Subaru Impreza phone mount that looks like it came with the car, this is it. This is a genuine Subaru accessory that drops directly into the center console cup holder, holding your phone in portrait or landscape at an adjustable angle. Because it mounts to the cup holder rather than a trim-specific bracket, it works across a wide span of Impreza model years without worrying about which dashboard generation you have.
Installation is tool-free: it sets into the cup holder cavity and stays put on its own weight and grip. The tradeoff is that it occupies your cup holder space, so it’s a better fit for drivers who don’t need that spot for a drink. It includes a small tray for coins or a key fob, which is a nice touch for a factory accessory.
YEGZA Dashboard Lock and Release Mount (2024-2026)
The 2024-2026 Impreza shares its dashboard with the redesigned Crosstrek, and this mount is built around that specific layout with a car-specific base rather than a generic clamp. It attaches to the dashboard using strong automotive-grade tape, and the phone side uses a mechanical lock-and-release clamp that closes around the phone with a firm click rather than relying on gravity or a magnet. The head rotates a full 360 degrees for portrait or landscape viewing, fits phones from 4 to 7 inches, and includes a cutout in the base for a charging cable to pass through.
This is the pick if you want a secure, tool-free mount on a current-generation Impreza and don’t mind an adhesive base rather than a clip-in bracket. Since it uses a mechanical clamp rather than a magnet, it works with any phone regardless of MagSafe compatibility, though very thick cases may not fit the clamp opening.
CUSTOMish Exact-Fit Air Vent Surround Mount (2017-2023)
For the older Impreza body style, this is the cleanest vent-based option we tested. Instead of clipping into the vent slats themselves, the bracket wraps around the outside of the vent bezel, so it never blocks airflow and never puts pressure on the fragile plastic louvers. That matters on the Impreza specifically, since its vertical vent slats are narrow enough that generic spring clips tend to slip or crack over time.
Installation is tool-free and reversible: it clips over the vent surround in under a minute and comes off cleanly if you sell the car or want to swap mounts later. It’s built domestically from a temperature-resistant polymer, which matters for a mount that sits on the dash in direct sun.
Course Motorsports DirectFit Magnetic Mount (2017-2023)
This one takes a different install approach. Rather than clipping onto a vent or bezel, the DirectFit bracket bolts on using existing factory hardware points, giving it a more rigid, permanent-feeling hold than clip-on options. It comes with a magnetic swivel head, a 17mm aluminum ball, and both a rectangular and round steel mounting pad, so you can attach a metal plate directly to your phone case or use an adhesive pad if you’d rather not.
It’s a good option for drivers who want the most secure hold possible and don’t mind a slightly more involved five-minute install. Note that the magnetic head is sized for standard metal plates rather than the larger MagSafe ring, so pair it with a case-mounted plate rather than a MagSafe case directly.
OQTIQ Suction Cup MagSafe Mount (Universal)
If you’d rather not commit to a vehicle-specific bracket, or you split time between multiple cars, this suction mount is a solid universal fallback. It uses a gel-lock suction cup rated for a heavy hold on the windshield or dashboard, paired with a magnetic MagSafe-compatible head on a dual-pivot arm that resists sag over time. Because it isn’t dependent on vent shape or console layout, it works on either Impreza generation without modification.
It’s not our top pick for daily use in an Impreza specifically, since the vehicle-specific mounts above sit more securely and out of the way, but it’s a smart backup to keep in the glovebox or use if you’re renting or borrowing a car.
Which Subaru Impreza Phone Mount Should You Choose?
Start with your model year. If you’re driving a 2024-2026 Impreza, the YEGZA mount is built specifically for your dashboard with a secure mechanical clamp rather than a clip or magnet. If you have a 2017-2023 model, the CUSTOMish vent surround is the lower-effort install, while the Course Motorsports DirectFit gives you a more rigid, permanent hold if you’re comfortable with a slightly longer setup. The genuine Subaru cup holder mount is the safest all-generation option if you don’t need your cup holder for anything else, and the OQTIQ suction mount is worth keeping around as a backup regardless of which mount you settle on.
The vertical vent slats that trip up mounts on the Impreza show up across most of Subaru’s lineup. If you’re also outfitting a Subaru Crosstrek or a Subaru Forester, the same fitment issues and several of the same mount families apply.
Frequently Asked Questions
Does the Subaru Impreza cup holder phone mount fit every model year?
Yes. Because it mounts into the cup holder rather than a trim-specific bracket, the genuine Subaru cup holder mount works across both the 2017-2023 and 2024-2026 Impreza generations.
Do vent mounts work on the Subaru Impreza?
Some do, but generic vent clips built for horizontal slats tend to slip on the Impreza’s narrow vertical vents. Purpose-built options like the CUSTOMish surround mount are engineered around that specific vent geometry.
What changed with the 2024 Impreza redesign that affects phone mounting?
The 2024 refresh shifted to a portrait touchscreen layout with different dash and vent positioning, which is why mounts built for the 2017-2023 dashboard, like the CUSTOMish and Course Motorsports options, don’t carry over cleanly to newer models.
