The best Ring Indoor Cam mounts solve a specific placement problem: getting closer to a window, wrapping the camera around an unusual surface, or extending it farther from a wall. For ordinary shelf and wall installations, the stand included with the camera is still the right place to start.
The Ring Indoor Cam is unusually adaptable for a compact indoor camera. Its removable stand handles basic placement, while the standard 1/4″-20 connection on compatible Ring Indoor Cam models opens up a large selection of camera tripods and mounting arms. That gives you better options than a proprietary mount would.
Ring Indoor Cam Mounts Compared
| Mount | Best For | Installation | Main Tradeoff |
|---|---|---|---|
| Included Ring stand | Shelves and basic wall mounting | No extra purchase | Limited reach |
| Arkon Short Suction Camera Mount | Looking outdoors through glass | No drilling on clean, smooth glass | Window reflections and suction maintenance |
| SmallRig Clamp Mount with Ball Head | Desk, shelf, rail, and furniture edges | Padded clamp; no drilling | Needs a solid edge within the clamp’s range |
| UYODM Articulated Wall Mount, 2-Pack | Permanent installs needing extra reach | Screws into a solid surface | More visible and requires holes |
Start With the Included Ring Indoor Cam Stand
The stock stand is the best mount for most owners because it is compact, stable, and already matched to the camera. Set it on a shelf, table, counter, or bookcase, then use the joint to aim the lens toward the area you want to monitor.
The included hardware also supports a basic wall installation. Before drilling, hold the powered camera in the proposed spot and check the live view in the Ring app. Look for a clear view of entry points without placing a bright window or lamp directly in the center of the image. Confirm that the power cord reaches an outlet without being stretched or creating a trip hazard.
Use the stock stand unless it creates one of these problems:
- A shelf leaves furniture or decorations in the camera’s view.
- The wall position does not extend far enough to see around an obstruction.
- You want the camera close to a window without drilling.
- The best location is a post, rail, or other surface that cannot hold the base.
Best Window Mount: Arkon Short Suction Camera Mount
A short suction mount is useful when the Indoor Cam will remain safely inside but look outdoors through a window. The Arkon mount uses a standard 1/4″-20 camera bolt and a short adjustable arm, so a compatible Ring Indoor Cam can sit close to clean glass without permanent hardware.
Keeping the lens close to the window reduces reflections, but it does not eliminate them. Turn off the camera’s infrared night vision when filming through glass because the infrared LEDs can reflect into the lens. At night, indoor lamps and bright screens may also appear in the image. Closing curtains behind the camera or darkening the room can help.
Apply the suction cup only to clean, smooth, non-textured glass. Clean both surfaces, let them dry, and press the cup firmly before locking it. Check the seal periodically, especially when the window experiences large temperature changes. Do not place the camera where a failed seal would let it fall onto a hard surface, into a sink, or near a child’s bed.
Best for: renters and homeowners who want a daytime view of a porch, driveway, or walkway without putting an indoor-rated camera outside.
Best Clamp Mount: SmallRig Clamp Mount with Ball Head
The SmallRig clamp is a better no-drill choice than a flexible tripod for most Indoor Cam installations. Its padded jaws grip a solid desk, shelf, rail, or furniture edge, while the double-ball arm lets you position a compatible camera above or below the clamping point. The camera end supports the standard 1/4″-20 connection.
A clamp is useful when the best viewing position has no open shelf surface. It can hold the camera at the edge of a bookcase instead of several inches back, attach beneath a sturdy shelf, or raise it above objects that would otherwise block the view. It is also easy to relocate, making it suitable for rentals and temporary setups.
Attach it only to a rigid edge that fully fits between the jaws. Tighten the clamp by hand, set the two ball joints, and give the completed installation a gentle pull before routing the power cable. Avoid glass shelves, thin decorative trim, loose railings, and surfaces that the clamp pads could mark. Position the tightening handle where children and pets cannot reach it.
Best for: secure, removable mounting on a desk, shelf, rail, or furniture edge without drilling holes.
Best Extended Wall Mount: UYODM Articulated Wall Mount
The UYODM wall mount is a better value than the old single Arkon arm for a permanent position that the stock Ring stand cannot reach. The package includes two articulated mounts, which is useful for households running more than one Indoor Cam. Each arm provides several adjustment points and extends the camera away from the mounting surface.
The arm ends in a 1/4″-20 mounting bolt for compatible cameras. That extra reach can help the lens see around tall furniture, clear deep window trim, or cover more of a room from a high wall. Because the arm places the camera farther from the surface, fasten the base to a wall stud or use anchors rated for the wall material and completed installation.
Tighten every joint after setting the angle. Keep the arm out of walkways, door swings, and locations where someone could grab it. Leave a gentle service loop in the power cable near the camera so repositioning the arm does not pull on the connector.
Best for: multi-camera households and permanent wall installations requiring more reach than the included stand provides.
How to Choose the Right Location
A good mount cannot correct a poor camera position. Pick the location before picking the hardware, and judge it using the live image rather than by eye alone.
- Cover the important path. Aim across a doorway or walking route so a person stays in frame longer. Avoid aiming only at the far end of a large room.
- Check power and Wi-Fi. The Indoor Cam needs continuous power and a dependable network connection. Test both before drilling.
- Control backlighting. Bright windows can make a person indoors appear dark. Shift the angle so the window occupies less of the image.
- Protect privacy. Do not point the camera toward bathrooms, private sleeping areas, or a neighbor’s windows. Tell household members and guests where indoor cameras are operating.
- Keep controls accessible. Leave enough room to unplug, reset, or remove the camera without taking down the entire mount.
Common Mounting Problems and Fixes
| Problem | Likely Cause | Fix |
|---|---|---|
| White glare through a window at night | Infrared LEDs reflecting from the glass | Turn off infrared night vision and reduce indoor light behind the camera |
| Suction cup slowly releases | Dirty, textured, damp, or cold surface | Clean and dry smooth glass, then reseat and test the cup |
| Camera shakes or changes angle | Loose joint or flexible support | Tighten the joints and move the mount to a rigid surface |
| Camera disconnects after relocation | Weak Wi-Fi or strained power cable | Test the signal and reroute the cable before final installation |
Ring Indoor Cam Mount FAQ
Can the Ring Indoor Cam be mounted on a wall?
Yes. The included stand and hardware cover a basic wall installation. A third-party 1/4″-20 wall arm is useful only when the stock stand cannot provide enough reach or angle adjustment.
Can the Ring Indoor Cam look outside through a window?
It can, but glass creates limitations. Place the lens close to the glass, turn off infrared night vision, and reduce lights behind the camera. The image may still show reflections, especially after dark.
Can the Ring Indoor Cam be installed outdoors?
No. A mount does not change the camera’s indoor rating. For an exposed exterior location, use an outdoor-rated camera and weather-appropriate hardware. Our Ring Outdoor Cam Plus mounts guide covers several exterior mounting choices.
Do all Ring Indoor Cam models use the same mount?
Do not assume they do. Ring has released multiple versions, and included parts can vary. Check the model and confirm a 1/4″-20 threaded socket before buying a universal camera mount.
Bottom Line
Most people should try the included Ring stand before buying another mount. It handles ordinary shelf and wall placement without adding cost or bulk.
Choose the Arkon suction mount when a compatible Indoor Cam needs to sit close to clean window glass, the SmallRig clamp for secure no-drill placement on an edge, and the UYODM articulated wall mount when a permanent installation needs extra reach. In every case, confirm the camera’s connection, test the live view, and plan the power cable before securing the mount.
