The Subaru Legacy was discontinued after the 2025 model year, with the final unit rolling off Subaru’s Indiana assembly line in September 2025, so this guide covers the last two generations you’ll actually find on the road or in dealer inventory: the 2015-2019 sixth generation and the 2020-2025 seventh and final generation. The Legacy is more mount-friendly than a lot of sedans its size. The windshield is accessible, the vents are usable, and the cabin gives you several workable placement options. The one thing to plan around is the dashboard itself: a large center speaker grille sits on top of the dash across most model years, which rules out the flat-surface dash mounting that works in other vehicles. If you’re weighing the Legacy against its SUV sibling, our Subaru Outback guide covers a closely related interior across a longer production run.
Subaru Legacy Phone Mount Comparison
| Mount | Best For | Years/Trim |
|---|---|---|
| Subaru Genuine Cup Holder Phone Mount | No-dash, no-vent OEM placement | 2017-2025 |
| Andobil Air Vent Mount | Center vent mounting on the older layout | 2015-2019 |
| iOttie Easy One Touch 6 | Windshield placement across both generations | 2015-2025 |
| APPS2Car CD Slot Mount | Centered mount on models with a CD player | 2015-2019 |
The Legacy’s road history runs back to 1989, but the mounting considerations that actually matter to a driver today only really apply to the last two generations still on the road in meaningful numbers. Earlier Legacy generations had far more varied dash layouts across trims, which makes broad mount recommendations less reliable for those older cars. If you’re driving a pre-2015 Legacy, the vent and windshield picks below are still a reasonable starting point, but you’ll want to double-check vent shape and dash clearance against your specific trim before ordering.
What Changed Between the Two Legacy Generations
The 2015-2019 Legacy runs a conventional center stack with usable horizontal vents and, on many trims, a CD player in the dash. That layout leaves several good mounting spots open and makes this the easier generation to work with overall. The 2020-2025 Legacy replaced that setup with a large vertical infotainment screen, which is a good landmark for orienting yourself in the cabin but leaves less flat space around it for a mount. Across both generations, the biggest thing to avoid is the center dash speaker grille sitting on top of the dashboard. It’s not a usable mounting surface on either generation, and it rules out most suction or adhesive dash mounts as a category.
Genuine Subaru Cup Holder Phone Mount
This is an actual genuine Subaru accessory rather than a third-party mount, and it’s the pick for anyone who’d rather not put anything on the windshield, vents, or dash at all. It drops into the center console cup holder and holds the phone in portrait or landscape at a range of tilt angles, with a small tray built into the base for loose items like coins or a keyfob. Because it’s a factory part, it fits the interior cleanly instead of looking bolted on, and it works the same way across both Legacy generations.
The obvious tradeoff is height. The phone sits lower than a vent or windshield mount, so if you rely on constant glances at navigation, this isn’t the best primary spot. For drivers who mostly use the phone for calls, music, or the occasional route check, it’s a clean and stable option that avoids the dash entirely.
Vent Mount for the 2015-2019 Legacy
The older Legacy’s horizontal center vents are a genuinely good mounting location, positioned at a comfortable height and angle for the driver. The catch is that a lot of generic vent clips rely on light spring tension that loosens over time, especially with a heavier phone in a case. The Andobil Air Vent Mount uses a locking clip instead, which holds its grip on the vent fins rather than slowly sagging, and the ball-and-socket joint gives you full 360-degree positioning once it’s clipped in.
Windshield Mount for Any Legacy Year
The Legacy’s windshield sits at a comfortable angle and isn’t so far from the driver that you need an oversized arm to reach it, which makes this one of the safest universal picks across both generations. The iOttie Easy One Touch 6 pairs a telescoping arm with a one-touch cradle release and a suction cup that locks reliably on glass. The cradle holds phones up to 3.5 inches wide and rotates 225 degrees for portrait or landscape, and because it’s a suction mount rather than a vehicle-specific bracket, it works identically whether you’re in a 2016 or a 2024 Legacy.
This is also the mount to reach for if you switch vehicles often or don’t want a permanent bracket left behind on the dash or vents.
CD Slot Mount for the 2015-2019 Legacy
If your Legacy still has a CD player, the slot itself is one of the better mounting locations in the cabin. It puts the phone in the center of the dash without touching the windshield, vents, or the speaker grille up top, and it’s a spot most drivers overlook simply because they don’t think of an empty CD slot as usable real estate. The APPS2Car CD Slot Mount uses an adjustable tightening mechanism to lock into the slot without the wobble or rattle that a loosely-fit CD mount can develop over time.
This one is naturally limited to Legacy models built with a CD player, which mostly means the 2015-2019 generation. The 2020-2025 Legacy’s large vertical screen setup doesn’t include a CD slot, so this option doesn’t carry over to the newer cabin.
Which Subaru Legacy Phone Mount Should You Choose?
Start with your generation, since it narrows the field before anything else matters. If you’re in a 2015-2019 Legacy, you have the most options: the vent mount and CD slot mount (if your trim has a CD player) both give you a centered, close-to-eye-level placement that the newer generation can’t match as easily. If you’re in a 2020-2025 Legacy, the windshield mount and cup holder mount are the more dependable picks, since the vent geometry around the larger screen makes a locking vent clip less of a sure thing.
Across both generations, the windshield mount is the safest default if you’re not sure which category fits your car, since it doesn’t depend on vent shape, screen size, or whether your trim has a CD player. The cup holder mount is the right call any time you’d rather avoid touching the dash, vents, or glass entirely, regardless of which generation you’re driving.
Installation on all four of these takes only a few minutes and none of them require drilling or leave adhesive behind on the dash. The cup holder mount drops into the existing console opening, the vent and CD slot mounts use the existing hardware in the cabin, and the windshield mount relies on a reusable suction pad rather than a one-time adhesive strip.
It’s also worth knowing that the Legacy Wagon was the original basis for the Outback, and the two model lines shared closely related dashboards for years before the Outback shifted to its own boxier SUV styling. If you’re cross-shopping a used Legacy against an Outback of a similar model year, expect a lot of overlap in what works for mounting, particularly on the windshield and cup holder options that don’t depend on vent or screen shape.
Frequently Asked Questions
Is the Subaru Legacy still in production?
No. Subaru ended Legacy production after the 2025 model year, with the final vehicle built at its Indiana plant in September 2025. There’s no direct sedan replacement, and Subaru has shifted its lineup toward SUVs like the Outback and Forester along with its electric models.
Why should I avoid the top of the Legacy’s dashboard?
Most Legacy interiors have a center speaker grille built into the top of the dash. It’s not a stable or safe surface for a suction cup or adhesive mount, and it also takes up most of the flat space that would otherwise be usable for a dash mount.
Will a mount built for the 2015-2019 Legacy fit the 2020-2025 model?
Not reliably for vent and CD slot mounts. The 2020-2025 Legacy’s dash layout changed with the larger vertical screen, and many trims from that generation dropped the CD player entirely. The windshield and cup holder mounts, on the other hand, work the same way across both generations.
Can I still buy parts and accessories for a discontinued Legacy?
Yes. Subaru typically maintains parts support for discontinued models for years after production ends, and aftermarket phone mount brands aren’t tied to whether a vehicle is still in production, so the options in this guide remain available regardless.
More Subaru Guides
If you’re comparing mounting options across the Subaru lineup, our Subaru Outback guide covers the closely related platform the Legacy Wagon originally spawned, our Subaru Forester and Subaru Ascent guides cover Subaru’s SUV lineup, and our Subaru Crosstrek and Subaru Impreza guides cover the compact end of the lineup. You can also browse the full vehicle mount guide directory for other makes and models.
