The Subaru Solterra has a dashboard unlike most other Subaru SUVs. Instead of the more conventional center-stack layout found in vehicles such as the Forester and Outback, the Solterra places a large touchscreen high in the center of the dash with the driver’s instrument display positioned farther forward near the windshield. That unusual layout makes choosing the right Subaru Solterra phone mount especially important.
Subaru Solterra interior
There are several good ways to mount a phone in the Solterra. Owners of 2023-2025 models have access to custom brackets built specifically around the factory 12.3-inch display, while vent and cup holder mounts provide more flexible choices. The redesigned 2026 Solterra requires a little more caution because Subaru replaced the earlier dashboard arrangement with a new 14-inch multimedia display and revised center console. As of the date of publication, most of the mount manufacturers have not released custom mounts for the 2026 line yet.
The Solterra also has an unusually close relative. It shares its basic vehicle architecture with the Toyota bZ4X, renamed the Toyota bZ beginning with the 2026 model year. Because many mounting products are sold for both vehicles, our Toyota bZ phone mount guide is worth reading if you are comparing custom mounting solutions.
Best Subaru Solterra Phone Mounts at a Glance
| Mount | Best For | Years / Trim |
|---|---|---|
| PZK Custom MagSafe Phone Holder | Best custom non-charging mount | 2023-2025 Solterra |
| SKYLOTEC 15W Wireless Charging Mount | Best custom charging mount | 2023-2025 screen design |
| HyperGear MagSafe Magnetic Vent Mount | Best compact universal mount | All years, suitable vent required |
| EXELIQ Magnetic Cup Holder Mount | Best vent-free option | All years |
What Makes Mounting a Phone in the Solterra Different?
The Solterra presents a few challenges you do not encounter in every SUV.
First is the high-mounted driver information display. Subaru places it forward near the driver’s line of sight rather than directly behind the steering wheel. A phone positioned too high or too far toward the driver’s side can compete with that display.
Then there is the center touchscreen. The 2023-2025 Solterra uses a 12.3-inch multimedia system on Limited and Touring models, while the 2026 redesign introduces a standard 14-inch display across the lineup. Mounting a large phone directly beside either screen can create a sizable block of screens in one part of the driver’s field of view.
The center console provides another alternative, but a low mount means looking farther away from the road when using navigation.
For those reasons, our favorite locations are a vehicle-specific screen-side mount for 2023-2025 models, a compact vent mount when you want something universal, or a cup holder mount if keeping the dashboard completely clear matters most.
PZK Custom MagSafe Phone Holder: Best Custom Mount
Best for: 2023-2025 Solterra owners who want an integrated-looking installation without occupying a cup holder or attaching a suction cup to the glass.
The PZK Car Phone Holder is built specifically for the 2023-2025 Subaru Solterra and Toyota bZ4X dashboard. Instead of clipping directly onto a thin vent blade, the system uses a custom base designed around the factory 12.3-inch screen area.
This gives it an important advantage over most universal mounts: the mounting point was chosen for this particular interior.
The phone attaches magnetically using a MagSafe-style head, and the head can rotate so the phone can be used vertically for everyday driving or horizontally when that orientation works better for an app.
PZK lists compatibility with phones from approximately 4 to 7 inches and includes a metal ring for phones or cases without built-in MagSafe compatibility.
The big limitation is model year. PZK explicitly lists this mount for the 2023-2025 Solterra. That distinction matters because of the redesigned 2026 interior.
SKYLOTEC 15W Wireless Charging Mount: Best Custom Charger
Best for: Drivers who like the location of a custom dashboard mount but also want wireless charging built into the holder.
The SKYLOTEC Car Phone Holder takes the screen-mounted concept one step further by combining a vehicle-specific mounting base with a magnetic wireless charging head.
SKYLOTEC markets the holder for the Subaru Solterra and Toyota bZ4X equipped with the earlier 12.3-inch display arrangement. The charger is rated for up to 15 watts and uses a rotating magnetic phone interface. Ideally we would prefer to see a 25 watt version but as of today, this is what is available.
This can make sense if you frequently use navigation, streaming audio or other phone functions that consume enough power to make charging worthwhile during longer drives.
There is also less cable handling than with a traditional mechanical cradle. Position the phone against the magnetic charging surface and remove it when leaving the vehicle.
HyperGear MagSafe Magnetic Vent Mount: Best Small Universal Option
Best for: Drivers who want a simple mount that can move between vehicles and does not depend on the Solterra’s screen design.
The HyperGear MagSafe Magnetic Car Phone Mount attaches to an air vent rather than the multimedia screen or dashboard trim. That makes it considerably less dependent on model-year-specific interior dimensions.
It is a compact design, which is a good match for the Solterra. The dashboard already contains a prominent driver display and center touchscreen, so a smaller phone mount can look less cluttered than a long articulated arm.
The magnetic attachment works directly with compatible phones and MagSafe cases. HyperGear also lists compatibility with several Samsung Galaxy models when used with an appropriate magnetic case or adapter.
The tradeoff is common to nearly all vent mounts. Your phone will occupy part of an air outlet, and the weight of a large phone is carried by the vent attachment.
For a 2026 Solterra, however, a universal mount like this has another advantage: you do not need to find a bracket engineered around the newly redesigned 14-inch screen.
EXELIQ Magnetic Cup Holder Mount: Best for Keeping the Dash Clear
Best for: Solterra owners who would rather sacrifice a cup holder than attach anything to the dashboard, touchscreen, windshield or air vents.
The EXELIQ Magnetic Cup Holder Phone Mount uses an expandable base that tightens inside a vehicle cup holder. Above the base is a short multi-joint adjustable arm and a powerful magnetic phone attachment.
EXELIQ specifies an adjustable base designed to accommodate cup holders roughly 3 to 4 inches across. The multiple pivot points let you move the phone toward the driver instead of leaving it directly over the cup holder.
That layout can work surprisingly well in an EV such as the Solterra because the phone does not necessarily need to sit beside the factory display. Wireless Apple CarPlay and Android Auto can put most navigation and media functions on the vehicle’s own screen while the phone remains accessible farther down.
There are two compromises. You lose use of one cup holder, and the phone sits lower than it does with the custom or vent options.
If you dislike attaching devices to interior trim, though, this is easily the least intrusive option in our group.
Which Mounting Location Works Best?
Instead of choosing a mount solely by product type, think about how you use your phone while driving.
If You Use Your Phone for Navigation
A screen-side or vent location is usually preferable because it keeps the phone relatively high. On 2023-2025 vehicles, the PZK is our first choice. For 2026, we would favor the HyperGear while waiting for more custom brackets made specifically for the redesigned dashboard.
If You Mostly Use Wireless CarPlay or Android Auto
You may not need the phone in your direct line of sight at all. A cup holder mount can keep the handset accessible without adding another screen beside the Solterra’s multimedia display.
If You Frequently Drive on Rough Roads
This is especially relevant to Solterra owners who use the SUV’s standard all-wheel drive and X-MODE capability away from smooth pavement. A secure mechanical mounting base matters more when the vehicle is bouncing over broken pavement or gravel.
Check the mount periodically to make sure its adjustment points remain tight, particularly with a heavier phone.
If You Change Vehicles Often
Choose one of the universal mounts. The HyperGear vent mount and EXELIQ cup holder mount can move to another vehicle, while a custom Solterra bracket generally stays with the Solterra.
The Solterra and Toyota bZ Connection
If the PZK mount looks familiar, there is a reason.
The Subaru Solterra and Toyota bZ4X were developed from the same basic electric SUV architecture, and their interiors share many components and mounting surfaces. That is why several custom phone mounts list both vehicles on the same product page.
For 2026, both vehicles received significant updates, including larger 14-inch multimedia displays and revised interiors.
That does not mean every accessory fits both cars in every model year. A product that attaches to a specific section of dashboard trim still needs to be checked against the appropriate year and interior.
If you are researching these mounts because you own the Toyota version, see our complete Toyota bZ phone mount guide. We cover several different universal mounting choices there as well, so the two guides complement each other rather than repeating the same recommendations.
What Changed on the 2026 Subaru Solterra?
The 2026 model is the dividing line Solterra owners need to know about when shopping for interior accessories.
Subaru redesigned the cabin and introduced a new 14-inch Subaru Multimedia System. Wireless Apple CarPlay and Android Auto remain part of the package, while two 15-watt wireless device chargers are standard.
That gives owners more built-in ways to use and charge a phone, but it also means brackets molded around the earlier multimedia screen may no longer have the same attachment points.
Common Solterra Phone Mount Problems
The phone blocks part of the factory touchscreen. Rotate or reposition the mount so the phone does not cover frequently used areas of the multimedia display.
A custom mount is ordered for the wrong dashboard generation. This is likely to become increasingly common as 2026 vehicles reach more owners. Check the model-year range carefully.
A vent mount moves under the weight of the phone. Make sure the attachment is fully engaged and avoid forcing an oversized clip onto a vent that does not accept it securely.
A magnetic mount seems weak. MagSafe-compatible cases make a substantial difference. A thick conventional case placed between the phone and magnet can reduce holding strength unless you use a compatible metal ring.
The phone is mounted unnecessarily high. Remember that wireless CarPlay and Android Auto already display navigation and media on the Solterra’s large center screen. You may only need the phone mounted within easy reach rather than directly beside your sightline.
Which Subaru Solterra Phone Mount Should You Buy?
For a 2023-2025 Subaru Solterra, we would choose the PZK Custom MagSafe Phone Holder for most drivers. The vehicle-specific base makes better use of the unusual Solterra dashboard than a generic mounting system.
If wireless charging is important, the SKYLOTEC 15W Wireless Charging Mount is the more feature-rich custom alternative.
For a 2026 Solterra, our choice changes. Until a larger selection of custom mounts specifically designed around the new 14-inch multimedia system is established, the HyperGear MagSafe Vent Mount is the safer dashboard-level choice.
The EXELIQ Cup Holder Mount is our pick for anyone who wants the dash and vents left completely untouched.
Frequently Asked Questions
What is the best Subaru Solterra phone mount?
For the 2023-2025 Solterra, we prefer the PZK custom magnetic mount because its base is designed specifically around the factory interior. For the redesigned 2026 Solterra, a universal vent or cup holder mount avoids compatibility issues with the new dashboard.
Will a Toyota bZ4X phone mount fit a Subaru Solterra?
Some will. The Solterra and Toyota bZ4X share many interior components, and certain custom mounts are specifically sold for both vehicles. Always check the exact model years listed by the mount manufacturer before ordering.
Will a 2025 Solterra phone mount fit a 2026 Solterra?
A universal mount may, but a custom screen or dashboard mount should not be assumed to fit. Subaru redesigned the interior for 2026 and introduced a different 14-inch center display.
Does the 2026 Subaru Solterra have wireless charging?
Yes. The 2026 Solterra includes two standard 15-watt wireless device chargers. A dedicated phone mount can still be useful if you want the handset positioned within easier reach or view.
Does the Solterra have wireless Apple CarPlay and Android Auto?
Yes. Wireless Apple CarPlay and Android Auto are available through the Solterra multimedia system, including the redesigned 14-inch system used for 2026.
Is a cup holder mount a good choice for the Solterra?
It can be, especially if you primarily interact with navigation and audio through the factory multimedia screen. A cup holder mount keeps the windshield, dashboard and air vents clear while leaving the phone accessible.
