Finding the right Mercedes-Benz E-Class phone mount comes down to which years your car falls into. Models from 2017 through 2023 have small round vents that most vent clips barely grip, while 2024 and newer models replaced those vents entirely with a thin ventilation bar that runs along the top of the dash, which means there is no vent to clip onto at all. Below are the mounts we have confirmed for each generation, along with a universal cup holder option that works regardless of year or trim.
| Mount | Best For | Years / Trim |
|---|---|---|
| LUNQIN Round Vent Mount | Round vent clip, no magnets needed | 2017-2023 |
| BEERTE MagSafe Vent Mount | MagSafe charging at the vent | 2017-2023 |
| MaserWeller MagSafe Screen-Clip Mount | Clips to the 12.3″ instrument screen frame, MagSafe | 2024-2026 |
| Masergogo Auto Clamp Screen Mount | Mechanical clamp, no case or MagSafe ring required | 2024-2026 |
| WeatherTech CupFone with Extension | Universal cup holder mount, any year | All years, sedan & wagon |
2017-2023 Mercedes-Benz E-Class: Round Vent Mounts
The Mercedes-Benz E-Class built between 2017 and 2023 kept the brand’s traditional round vent design, four small chrome circles across the dash. It is a tighter fit than the round vents on a C-Class or GLC, so a generic universal vent clip tends to sit loose or tilt under its own weight. The two mounts below are built specifically around this vent geometry.
LUNQIN Round Vent Mount
This is the simplest option if you want a mechanical clip rather than a magnetic mount. It clamps directly onto the vent blade and holds phones from small compacts up to larger models in a case, with a rotating ball head so you can angle the screen toward the driver or tilt it flat for wireless CarPlay glare control. Because it grips the vent fin rather than resting inside the vent opening, it does not restrict airflow the way some bulkier vent mounts do.
BEERTE MagSafe Vent Mount
If you carry a MagSafe-compatible iPhone or run a magnetic ring case on an Android phone, this mount skips the mechanical clamp entirely. Twenty embedded magnets hold the phone flat against the vent with enough strength to survive rough pavement, and the ball joint at the base lets you swing the phone toward the driver’s seat. It is rated for the same vent shape used across Mercedes-Benz E-Class models from this era, and it also fits the CLS-Class from the same years, which shares the same dash architecture.
2024 and Newer Mercedes-Benz E-Class: Screen-Clip Mounts
Mercedes-Benz redesigned the E-Class dash starting with the 2024 model year around the MBUX Superscreen, and the round vents disappeared in the process. Cabin air now comes through a thin bar that spans the width of the dash, so there is no vent fin left to clip a mount onto. Every reliable mount for these newer models instead clips to the black bezel frame around the 12.3-inch digital instrument cluster, which sits directly ahead of the driver and puts the phone in a natural sightline without touching the windshield or the vent system. We covered this same shift on the Mercedes-Benz GLS phone mount guide, where the twin-screen dash creates a nearly identical mounting problem.
MaserWeller MagSafe Screen-Clip Mount
This mount is built from a 3D scan of the instrument cluster bezel on the 2024 and newer Mercedes-Benz E-Class, so it clips into place without adhesive and without touching the screen glass itself. Twenty N55 magnets hold a MagSafe iPhone flat and steady, and the whole unit rotates 360 degrees. Because it is scanned to a specific screen layout, double check that your car has the 12.3-inch cluster before ordering. Some higher trims run the larger Superscreen layout, and Mercedes-Benz has been known to make small running changes between model years.
Masergogo Auto Clamp Screen Mount
For 2024-and-newer Mercedes-Benz E-Class owners who do not want to rely on magnets, this mount uses the same bezel-clip attachment point but swaps in a mechanical clamp with a one-touch release button. It locks or releases the phone in about a third of a second and does not require a case with a metal plate or a MagSafe ring, which makes it the better pick for thick cases or older phone models that were never built with magnetic charging in mind.
Universal Pick: WeatherTech CupFone
If you are not sure which year your Mercedes-Benz E-Class falls into, if your dealer swapped a vent piece and the fit is off, or if you simply want a mount that never has to worry about a running change again, the cup holder is the fallback. WeatherTech’s CupFone with Extension separates into adjustable base rings so it seats securely in the E-Class console cup holder regardless of sedan or wagon body style, and the open-frame cradle leaves your charging port and camera clear. It is not going to give you the closest sightline to the road, but it is the one mount on this page that will fit every E-Class on the road today.
How to Choose the Best Mercedes-Benz E-Class Phone Mount
Start by looking at your vents. If your dash has four small round chrome vents, your car was built between 2017 and 2023, and either vent mount above will fit. If your dash has a continuous thin ventilation bar running along the top instead of individual vents, your car was built for the 2024 model year or later, and you need one of the screen-clip mounts instead. Trying to force a vent mount onto a car that never had round vents, or a screen-clip mount onto an older dash that never had the matching cluster bezel shape, will not work no matter how the listing photos look.
From there, the decision is mostly about magnets versus mechanical grip. MagSafe mounts are faster to use one-handed and look cleaner once installed, but they need either a MagSafe iPhone or a thin magnetic ring added to an Android phone or case. Mechanical clamp mounts work with any phone in any case, at the cost of being slightly slower to load and unload. Neither approach touches the factory vents or screen bezel in a way that would affect resale, and every mount on this page is fully reversible.
Of course, the univesal cup holder mount will fit all of these years.
FAQ
Does the round vent mount fit the CLS-Class too?
Yes. The BEERTE MagSafe mount is listed for both the 2017-2023 E-Class and the 2018-2023 CLS-Class, since the two share the same dash and vent design from that era.
Can I use a vent mount on a 2024 or newer Mercedes-Benz E-Class?
No. Starting with the 2024 model year, Mercedes-Benz replaced the round vents with a solid ventilation bar, so there is no vent fin left to clip onto. A screen-clip mount is the only custom option for these newer cars.
Will the screen-clip mount block my instrument cluster?
It attaches to the bezel frame surrounding the display, not the glass itself, so it does not cover any part of the actual screen content.
Does the E-Class wagon use the same mounts as the sedan?
Yes, both body styles share the same dash and cluster layout within each model year range, so the mount you need depends only on the year, not sedan versus wagon.
What if my phone case is too thick for the magnetic mounts?
Use the mechanical clamp option for your car’s year range instead. The LUNQIN vent mount and Masergogo screen clamp both hold the phone with physical pressure rather than magnets, so case thickness is not a concern.
Related Reading
Mercedes-Benz CLS mounts
Mercedes-Benz GLC phone mounts
Mercedes-Benz GLS phone mount
