The Cadillac Lyriq’s cabin is built around a single dominant feature: the 33-inch curved LED display that stretches across the dashboard. That screen changes the whole calculus for a Cadillac Lyriq phone mount, since there is no traditional bezel to clip onto and the factory wireless charging pad in the console is not always practical for active navigation. Below are the best custom-fit options built specifically for the Lyriq’s shared GM display, plus a universal pick for owners who would rather keep their phone off the screen entirely.
| Mount | Best For | Years/Trim |
|---|---|---|
| MaserWeller MagSafe Dashboard Mount | Dedicated Lyriq-only fit | 2023-2026 Lyriq |
| MaserWeller 33-Inch Screen Clip Mount | Households with a CT5, XT4, or Optiq too | 2023-2026 Lyriq (33″ screen) |
| Soukeo Adjustable Cradle Mount | Thicker phones and cases | 2023-2025 Lyriq |
| APPS2Car Magnetic Cup Holder Mount | Keeping the screen bezel untouched | Any year, universal fit |
MaserWeller MagSafe Dashboard Mount
This is the most Lyriq-specific option on this list. MaserWeller built the base using a 3D scan of the Lyriq’s dashboard, so it seats into the factory contour without adhesive or drilling and stays put through the SUV’s fairly firm ride. The head uses MagSafe magnets for iPhone, with an adhesive metal ring included for Android and older iPhone models, and the whole thing rotates 360 degrees for portrait or landscape viewing. Since it mounts off to the side of the display rather than clipping to the screen edge, it keeps the full 33-inch panel unobstructed, which matters if you use CarPlay maps or the built-in navigation regularly.
The tradeoff is that this listing is scoped to the Lyriq only. If your household also runs a CT5, XT4, or Optiq on the shared GM platform, the screen-clip option below covers all four with one purchase.
MaserWeller 33-Inch Screen Clip Mount
Where the dashboard mount above is Lyriq-specific, this one is built around the 33-inch curved display itself, which means it also fits the redesigned CT5, the XT4, and the Optiq. The spring clip grips the edge of the screen bezel directly, so the phone sits close to the driver’s natural sightline instead of off to the side. It uses the same MagSafe magnetic head as the dashboard version, with a metal ring adapter for non-MagSafe phones, and the clip mechanism is designed for a single year model rather than a multi-year range, so double check your production year before ordering.
This is the pick we would recommend for anyone who splits time between a Lyriq and another Cadillac on the same GM platform, since the mount head transfers cleanly between vehicles that share this exact screen.
Soukeo Adjustable Cradle Mount
This is the pick for drivers who want a mechanical cradle instead of a magnetic head, whether that’s because of a thick case, a heavier phone, or a general preference for a physical clamp over MagSafe. The base attaches to the front of the instrument panel below the display and holds the phone stand at an adjustable height, so the cradle itself does not touch the screen bezel. The arm rotates 360 degrees for portrait or landscape viewing, and the cradle fits phones from roughly 4 to 7 inches, built from silicone and ABS to reduce vibration and rattle. No drilling or tools are required for installation.
This is a straightforward clamp-and-cradle setup rather than a magnetic one, which makes it the most forgiving option here for larger phones in bulky cases that might strain a magnetic head.
APPS2Car Magnetic Cup Holder Mount
If you would rather not touch the Lyriq’s screen bezel at all, whether for resale concerns or just personal preference, a cup holder mount is the cleanest universal alternative. The APPS2Car uses a twist-to-expand base that fits most 3 to 4 inch round cup holders, three rotating ball joints for a tri-pivot arm, and a MagSafe-compatible magnetic head with 17 magnets for a strong hold. Because it lives in the cup holder rather than the dash, it keeps the phone within easy reach for calls and music without occupying any dashboard or screen real estate.
The obvious tradeoff is that it takes over one cup holder, which matters if the Lyriq’s console layout is already tight for your household. For most drivers who want a no-commitment, no-drilling option, though, this is a dependable fallback that also travels to a rental car or a second vehicle.
Keep in mind that a cup holder mount isn’t ideal for apps that need to be frequently accessed while driving and are best to setup prior to getting underway since they aren’t in the line of sight.
Custom-Fit or Universal: Which Should You Buy?
For most Lyriq owners, a custom-fit mount is worth the small premium over a generic vent clip, mainly because the Lyriq does not have a traditional vent layout that generic mounts are designed around. All three custom options above were built from a scan of this exact interior, so they sit flush and do not introduce any wobble on rough pavement. A universal cup holder mount remains the better call if you want a mount that also works in other cars you drive, or if you would rather avoid anything that contacts the dashboard or display housing entirely.
Within the custom-fit group, the decision usually comes down to how you want the phone to attach. MagSafe magnets, used on both MaserWeller mounts, give you the fastest one-motion attach and release, which is the main reason they have become the default choice for newer vehicle-specific mounts. A mechanical cradle like the Soukeo trades that speed for a firmer physical grip, which is worth considering if you run a heavier phone, a rugged case, or simply prefer not to rely on magnets for something you are glancing at while driving.
Installing a Phone Mount on the Lyriq’s 33-Inch Display
Regardless of which mount you choose, the Lyriq’s curved dash makes prep work more important than it is in a vehicle with a flat panel. Before installing any of the custom-fit mounts above, clean the mounting area with a microfiber cloth and a small amount of isopropyl alcohol, then let it dry fully. This matters more on the Lyriq than on most vehicles because the dash trim around the display uses a soft-touch finish that can trap dust and oils, which will keep an adhesive-backed base from seating properly even if the mount itself is a correct fit.
For the two MaserWeller mounts, take a moment to confirm your exact production year against the listing before you install, since both are scoped to specific year ranges rather than a blanket fit. For the Soukeo cradle, the adjustable-height arm means you have some flexibility to fine-tune the final position after the base is attached, so it is worth test-fitting a few heights with your phone in hand before committing to a final angle. None of the four mounts in this guide require drilling or leave adhesive residue, so a mismatched fit is an inconvenience rather than a lasting mark on the interior.
Frequently Asked Questions About Cadillac Lyriq Phone Mounts
Will a Cadillac Lyriq phone mount interfere with the touchscreen?
The 33-inch screen clip mount grips the outer bezel edge only, not the active display area, so touch functionality is not affected. The dashboard MagSafe mount, the cradle mount, and the cup holder mount don’t contact the screen at all.
Do these mounts fit both the standard Lyriq and the Lyriq-V?
Yes. The Lyriq-V shares the same dashboard and 33-inch display as the standard Lyriq, so fitment is identical across trims.
Can I use one of these mounts in my CT5 or XT4 as well?
The 33-inch screen clip mount is built for the shared GM display, so it also fits the redesigned CT5, the XT4, and the Optiq. The dashboard MagSafe mount and the Soukeo cradle mount are both scoped specifically to the Lyriq’s dash contour and are not built for those other models.
Does the Lyriq’s factory wireless charging pad make a phone mount unnecessary?
Not for active navigation. The console charging pad keeps the phone flat and out of the driver’s sightline, which works fine for passive charging but is not a substitute for a mount if you rely on your phone’s own maps app rather than the built-in navigation system.
Do I need a MagSafe case for the magnetic mounts to work?
No. Both MaserWeller mounts include an adhesive metal ring that attaches to the back of a non-MagSafe phone or case, giving the magnetic head something to grip. It is a permanent addition to that phone, so factor that in if you switch devices often.
Related Reading
Best Cadillac CT5 Phone Mounts
Best Phone Mounts for the Cadillac XT5
