The Ford Maverick has one of the most functional compact truck interiors on the market, but it presents a genuinely tricky phone mounting situation. The upright tablet-style screen dominates the center stack, the textured dash surface defeats adhesive mounts in summer heat, and the air vents sit lower than you would like. Generic mounts that work fine in other vehicles either do not fit, do not hold, or end up in awkward positions in the Maverick.
The good news is that the Maverick has attracted a strong aftermarket. There are now several purpose-built solutions that take advantage of the truck’s specific interior layout, including two completely different custom mounting approaches that do not exist on most other vehicles. This guide covers the best options for both the 2022-2024 and 2025 model years, which have different interior dimensions and require different mounts.
Quick Comparison: Best Ford Maverick Phone Mounts
| Mount | Best For | Years |
|---|---|---|
| Bulletpoint RubiGrid Dash Mount | Best Overall / Most Versatile | 2022, 2023, 2024 |
| Bulletpoint RubiGrid Dash Mount | Best Overall / Most Versatile | 2025, 2026 |
| Mabett Cubby Insert Mount | Most Innovative / No Drilling | 2022, 2023, 2024 |
| Mabett Magnetic Dashboard Mount | Most Innovative / No Drilling | 2025, 2026 |
| Andobil MagSafe Vent Mount | Best MagSafe / iPhone | All Years |
| iOttie Easy One Touch 6 | Best Windshield Mount | All Years |
Why the Maverick Is Tricky to Mount
Most truck interiors have a fairly flat dash surface with some usable real estate for adhesive or suction mounts. The Maverick does not. The tablet-style screen sits in a vertical, nearly upright position that dominates the center stack and leaves very little flat dash space to work with. The remaining surfaces are textured, which causes adhesive pads to lose grip over time, particularly in the summer heat that builds up inside a parked vehicle.
The air vents sit lower on the dash than in most trucks, below the screen rather than beside or above it. A vent mount works, but it puts the phone lower than ideal for navigation. It is a secondary option at best in this vehicle.
The Maverick’s saving grace is its small dash cubby and its overall popularity with the aftermarket. Maverick owners are an unusually active and modification-minded community, which has driven manufacturers to develop clever truck-specific solutions that simply do not exist for most vehicles.
Best Overall: Bulletpoint RubiGrid Dash Mount
The Bulletpoint RubiGrid is the best custom mount available for the Ford Maverick and the pick for any owner who wants a permanent, factory-quality installation. It is a laser-cut metal dash platform that installs into the top dash area of the Maverick and provides a solid, stable mounting point for one or more devices. The platform uses the AMPS ball system, which means it is compatible with phone holders, tablet mounts, action cameras, GPS cradles, CB radio mounts, and a wide range of other accessories. You can start with one phone mount today and expand to multiple devices without replacing the base.
Installation requires removing the plastic top dash tray, drilling four small holes, and securing the base with the included hardware before pressing the tray back into place. It is a permanent installation, but the end result looks like it was put there at the factory. Bulletpoint ships the mount with one AMPS ball, one carbon fiber and Kevlar mounting arm, and one spring-loaded phone holder that opens to 3.4 inches and fits any current phone in any case.
There are separate versions for the 2022-2024 and 2025+ Maverick due to the interior differences between the two generations. Make sure you select the correct one for your truck.
View Bulletpoint RubiGrid for 2022-2024 Maverick on Amazon
View Bulletpoint RubiGrid for 2025+ Maverick on Amazon
Most Innovative: Mabett Cubby Insert Mount
The Mabett is a genuinely clever solution that takes advantage of something unique to the Maverick’s interior. There is a small dash cubby next to the center screen that ships from the factory with a rubber insert and serves essentially no useful purpose for most owners. The Mabett cubby mount replaces that rubber insert with a custom-fit storage box that includes a magnetic phone mount on top. Remove the factory rubber piece, press the Mabett insert in, and you have a phone mount that looks like it belongs there because it sits exactly where Ford put the cubby.
The 2022-2024 version includes a magnetic phone holder with an adjustable ball head and is compatible with MagSafe iPhones and Android phones with a magnetic case. It also adds storage space to a spot that was previously wasted. No drilling, no adhesive, no marks left if you remove it.
The 2025 Maverick uses a different interior layout and Mabett has a separate magnetic dashboard mount designed for that generation. It is a dual-connection magnetic stand that integrates with the 2025 interior contours without drilling or complex installation.
View Mabett Cubby Mount for 2022-2024 Maverick on Amazon
View Mabett Dash Mount for 2025 Maverick on Amazon
Best MagSafe Vent Mount: Andobil MagSafe Air Vent Mount
If you prefer a no-drill, no-modification solution that works across all Maverick model years, the Andobil MagSafe vent mount is the pick for iPhone users. The metal hook clips onto the underside of the vent slat for a hold that does not rely on friction tension alone, and a MagSafe iPhone snaps on in one motion. The 360-degree ball joint adjusts to any viewing angle, and metal ring adapters are included for Android phones and non-MagSafe iPhones.
The honest caveat for the Maverick specifically: the center vents sit lower on the dash than in most trucks, which means the phone will not be quite at eye level the way it would in a Tacoma or F-150. It is a workable position for navigation and audio control, but worth knowing before you commit to this location over the cubby or dash options above.
View Andobil MagSafe Vent Mount on Amazon
Best Windshield Mount: iOttie Easy One Touch 6
The windshield is actually a strong mounting location in the Maverick. The relatively upright windshield provides good suction cup adhesion, the driver reach is comfortable for a compact truck, and the height puts the phone closer to eye level than the vent position. The iOttie Easy One Touch 6 is the windshield pick for all Maverick model years. The telescoping arm extends from 5 to 8 inches, the auto-grip cradle holds any current phone with or without a case, and the included adhesive dash pad gives you a secondary mounting option if you find a workable flat surface.
View iOttie Easy One Touch 6 on Amazon
What Does Not Work in the Ford Maverick
Adhesive dash mounts are the most common mistake Maverick owners make. The textured dash surface reduces adhesive contact area, and summer heat in a parked truck accelerates adhesive failure. Even quality brands struggle to hold long-term on this surface. Skip adhesive mounts entirely and use one of the solutions above.
CD slot mounts are not an option. The Maverick does not have a CD player.
Cup holder mounts work for passive use such as music or podcasts, but the position is too low for active navigation. The center console cup holder also sits close to the gear selector, which can make it awkward to access.
Seat bolt mounts are not practical in the Maverick. The hardware is not easily accessible without removing trim.
Frequently Asked Questions
Do the 2022-2024 custom mounts fit the 2025 Maverick?
No. The 2025 Maverick received interior changes that make it incompatible with mounts designed for the earlier generation. Both Bulletpoint and Mabett produce separate versions for the 2025 model. Always confirm your model year before ordering any custom-fit mount.
Does the Bulletpoint RubiGrid require drilling?
Yes. It requires drilling four small holes into the plastic dash tray. All hardware is included. This is a permanent installation designed for owners who want the maximum stability and a factory-style appearance. If you prefer zero modification, the Mabett cubby insert and the vent or windshield options require no drilling.
Can I expand the Bulletpoint RubiGrid to hold multiple devices?
Yes. The RubiGrid uses the AMPS ball system, which supports phone holders, tablet mounts, action cameras, GPS cradles, and CB radio mounts. The 2022-2024 base supports up to three AMPS balls plus one 1/4-inch 20 threaded adapter. You can add devices at any time without replacing the base.
Does the Mabett cubby mount require any modification to the truck?
No. The 2022-2024 Mabett cubby insert replaces the factory rubber piece in the small dash cubby next to the screen. It presses in without any tools, adhesive, or drilling. It can be removed without leaving any marks.
Do I need a MagSafe iPhone to use the Mabett or Andobil mounts?
No. Both include metal ring adapters that add magnetic compatibility to any phone or case. The hold is slightly weaker than native MagSafe but adequate for everyday driving.
What is the best mount for the Maverick if I use Apple CarPlay with a cable?
The Andobil vent mount keeps the charging port accessible for a wired connection. The Bulletpoint RubiGrid with a spring-loaded cradle also works well with a cable since the holder does not cover the port. For wireless CarPlay, the Mabett cubby mount with its magnetic connection is the cleanest cable-free setup.
More Ford Truck Mount Guides
Looking for phone mount guides for other Ford trucks?
