The Chrysler 300 ran from 2005 through the 2023 model year, when Stellantis officially ended production. With millions still on the road, finding the right phone mount for this car is as relevant as ever. The good news: the 300 has a roomy, well-designed cabin with several solid mounting locations. No Chrysler-specific mounts exist for this vehicle, but the best universal options work exceptionally well here.
If you have an iPhone 12 or newer, MagSafe mounting is the single biggest upgrade you can make to your in-car experience. Your phone snaps into place magnetically in one motion, with no cradle arms to squeeze and no fumbling around. We cover those options first, followed by the best universal clamp mounts for Android and older iPhone owners.
| Mount | Best For | Location |
|---|---|---|
| Andobil MagSafe Air Vent Mount | iPhone 12 and newer, one-handed snap-in | Air Vent |
| Andobil Air Vent Mount | All phones, universal clamp, Android and iPhone | Air Vent |
| iOttie Easy One Touch 6 | Larger phones, tall windshield reach, GPS use | Windshield / Dash |
| iOttie Easy One Touch Cup Holder | No windshield or vent preference, stable base | Cup Holder |
MagSafe Mounts for the Chrysler 300
MagSafe is Apple’s magnetic alignment system built into every iPhone 12 and newer. A MagSafe car mount uses a ring of magnets to snap your phone into place instantly — no arms, no buttons, no positioning. You just bring the phone near the mount and it locks on. For iPhone users, this is the most convenient way to mount a phone in any vehicle.
The Chrysler 300 has traditional horizontal air vents in the center of the dash — exactly what a vent-clip MagSafe mount needs. The middle vents keep your phone close to eye level without blocking any controls or obstructing your sightlines.
The Andobil MagSafe Air Vent Mount is our top pick for iPhone users in the 300. It uses 20 N55 magnets for a hold strong enough to keep your phone planted through highway driving, sharp turns, and rough pavement. The double-locking vent clip grips horizontal vents firmly, and the 360-degree ball joint lets you set any angle you want. Installation takes about thirty seconds — clip it onto a center vent, bring your iPhone near the mount, done. It also works with Android phones using the included metal ring.
Check Price on AmazonBest Universal Air Vent Mount
Not every phone user is on iPhone, and not every iPhone case is MagSafe-friendly. For those situations, a clamp-style vent mount gives you the same close-to-eye-level positioning with a spring-loaded cradle that fits any phone.
The Andobil Air Vent Mount is the pick here. The cradle opens wide enough to fit phones up to 3.75 inches wide, which covers even the largest iPhone Pro Max and Galaxy Ultra models in most cases. The locking vent clip uses aerospace-grade PTFE material that grips the 300’s center vents without loosening over time. Ball-and-socket design gives you full 360-degree rotation so you can run portrait or landscape. We’ve reviewed this mount in depth — see our Andobil Air Vent Mount review for the full breakdown.
Check Price on AmazonWindshield and Dash Mounts for the Chrysler 300
The Chrysler 300 windshield has a bit more reach than a typical sedan — closer to an SUV in depth. That’s worth knowing because not all windshield mounts have a long enough telescoping arm to reach a comfortable viewing position. The iOttie Easy One Touch 6 addresses this directly with an arm that extends from five to nearly seven inches, giving you the flexibility to position your phone where you actually want it rather than where the arm limits you.
The suction cup base on the Easy One Touch 6 creates a firm hold on both glass and smooth dash surfaces. The one-touch cradle mechanism lets you snap your phone in or pull it out with a single hand — useful when you’re getting in and out of the car repeatedly. The self-centering arms hold the phone steady even when the road gets rough, and the built-in cable management keeps your charging cable from flopping around.
For those in states where windshield mounting is restricted, the suction cup attaches just as securely to the dash using the included adhesive disk. Check our guide on GPS and phone mount laws by state if you’re unsure about your area.
Check Price on AmazonCup Holder Mount: Is It Worth It in the 300?
The Chrysler 300’s cup holders sit further back toward the driver than most vehicles — they’re set behind the center console area in a position that makes reaching them somewhat awkward for a mounted phone. If you’re using it primarily for music or a podcast and don’t need to glance at the screen frequently, a cup holder mount can still work. For active navigation, though, a vent or windshield mount is a better choice for this particular car.
If you prefer the cup holder setup regardless, the iOttie Easy One Touch Cup Holder Mount gives you a weighted, stable base that won’t tip over and a telescoping arm with full 360-degree rotation. It fits most cup holder sizes and works with any phone.
Check Price on AmazonWhere to Mount Your Phone in a Chrysler 300
The center air vents are the best starting point for most 300 owners. They’re traditional horizontal vents that accept standard vent clips without issue, and they position the phone at roughly eye level in the center of your field of view. Use the vents closest to the driver rather than the passenger-side vents so you’re not reaching across the dash.
If you prefer the windshield, mount toward the lower driver’s-side corner — this keeps the phone visible without blocking road sightlines and satisfies the legal requirements in most states that require windshield mounts to be in specific corner zones. Set your telescoping arm position and viewing angle before you start driving, then leave it.
The 300 does not have a CD slot, so CD-slot mounts are off the table. The car seat bolt is accessible and can work for a tablet mount, though you’ll need the right tools to loosen the outer bolt. For tablet use, see our best tablet mount for cars guide.
Frequently Asked Questions
Does the Chrysler 300 have good air vents for a phone mount?
Yes. The 300 has standard horizontal vents in the center dash that accept most vent clip mounts without any fitment issues. They’re well-positioned and easy to reach.
Is there a MagSafe mount made specifically for the Chrysler 300?
No vehicle-specific mounts exist for the 300. The universal MagSafe vent mounts listed here fit the 300’s center vents without any modification and work just as well as a purpose-built option would.
Will a MagSafe mount work with my Android phone?
Most MagSafe car mounts include a thin metal ring you can adhere to the back of your phone or inside your case. This lets any phone take advantage of the magnetic snap-in system. It’s a minor addition and works reliably.
Is the Chrysler 300 still being made?
No. Stellantis ended production after the 2023 model year. However, there are millions of 2005 through 2023 model year 300s still on the road, and all of the mounts in this guide fit the full production run.
Can I use a dash mount in the Chrysler 300?
Yes, if your dash surface is not leather or heavily textured. The suction cup mounts listed here come with an adhesive disk that converts any suction mount into a dash mount. If your 300 has a leather dash, use the windshield instead.
What is the best overall mount for the Chrysler 300?
For iPhone 12 and newer, the Andobil MagSafe Air Vent Mount is the easiest and most convenient option. For everyone else, the Andobil Air Vent Mount handles any phone and fits the 300’s vents without any issues.
Looking for more phone mount ideas? See our full best MagSafe car mount roundup.
