Finding the right RAV4 phone mount now starts with one question: which generation do you own? Toyota redesigned the dashboard for 2026, so a mount made for a 2019–2025 RAV4 will not fit the new model. The 2013–2018 dashboard is different again.
This guide separates the picks by generation and screen size. If you drive a 2026 RAV4, start with the MOCHENT mount below. For the 2019–2025 generation, the Autorder and PZK mounts attach around the smaller 7-inch or 8-inch display. Owners of a 2013–2018 model have a dedicated Focada option.
Best RAV4 Phone Mounts Compared
| Mount | Best For | Years / Screen |
|---|---|---|
| MOCHENT Dual-End Magnetic Mount | Best 2026 pick | 2026, 10.5-inch screen |
| PZK Magnetic Charging Mount | Wireless charging | 2019–2025, 7/8-inch screen |
| Autorder Screen Mount | Noncharging custom fit | 2019–2025, 7/8-inch screen |
| andobil Vent Mount | Universal fallback | Compatible vents only |
| Focada Dashboard Mount | Older RAV4 models | 2013–2018 |
MOCHENT Dual-End Mount: Best for the 2026 RAV4
Fits: 2026 Toyota RAV4 with the 10.5-inch infotainment screen. The listing excludes XSE, Limited, GR Sport, and Plug-in Hybrid XSE configurations.
The MOCHENT is the correct replacement for the old driver-side vent pick. It does not mount to the vent. A dual-end base grips the infotainment display area, keeping the magnetic phone pad beside the screen without blocking airflow.
The magnetic head rotates through 360 degrees for portrait or landscape use. MagSafe iPhones attach directly, while a suitable magnetic ring is needed for a non-MagSafe phone or case. This version is a holder rather than a wireless charger, so a separate cable is still required when the phone needs power.
PZK Magnetic Charging Mount: Best Charging Pick for 2019–2025
Fits: 2019–2025 Toyota RAV4 models with a 7-inch or 8-inch screen. It does not fit the 9-inch or 10.5-inch display.
The PZK combines a vehicle-shaped base with a magnetic charging head. The base braces against the screen and adjacent vent area rather than hanging from one flexible vent blade. That gives it a more integrated position than a generic clip while leaving the front of the vent mostly open.
This is the better choice for drivers who want the phone to charge whenever it is placed on the mount. The listing specifies a 15-watt charging design, though the speed a phone receives depends on the phone, case, power adapter, and cable. Check that your exact trim has the listed 7-inch or 8-inch screen before ordering.
Autorder Screen Mount: Best Noncharging Pick for 2019–2025
Fits: 2019–2025 Toyota RAV4 models with a 7-inch or 8-inch touchscreen.
The Autorder uses a custom base around the display and a conventional adjustable cradle. It is a sensible choice when magnetic charging is unnecessary or when the phone wears a thick case that does not cooperate with a magnetic pad.
The cradle rotates for portrait or landscape viewing and holds phones measuring roughly 4.7 to 6.9 inches, according to the listing. Its main limitation is the same as the PZK: it was designed around the earlier dashboard and smaller screen choices. It is not a 2026 solution.
andobil Vent Mount: Best Universal Fallback
Fits: RAV4 vents that provide enough clearance for the rear hook and tightening collar.
The andobil is useful when a custom screen mount does not match your trim. Its metal hook reaches behind a vent blade and tightens from the front, which is more secure than a basic friction clip. The cradle has side arms rather than a magnetic pad, so it works with a wider range of phones and cases.
This is not a guaranteed fit for every RAV4 vent. The hook needs space behind the blade, and the collar needs a flat enough surface to tighten. Inspect the vent before ordering, especially on a redesigned dashboard. Our car vent phone mount guide explains the common clip and hook designs.
Focada Dashboard Mount: Best for 2013–2018
Fits: 2013–2018 Toyota RAV4.
The fourth-generation RAV4 needs its own base. The Focada uses a vehicle-specific support that follows the older dashboard and braces near the vent. It avoids adhesive pads and windshield suction cups while placing the phone close to the center display.
The included cradle rotates and uses side arms to hold the phone. Do not confuse this noncharging version with similarly shaped wireless models sold under other brands. One wireless alternative in the previous draft did not meet our product-rating threshold, so it has been removed.
RAV4 Phone Mount Compatibility by Generation
Toyota’s 2026 redesign is the dividing line that matters most. Use this short guide before comparing features:
- 2026 RAV4: Use a mount explicitly designed for the new dashboard and your exact screen. The MOCHENT 10.5-inch version excludes several upper trims.
- 2019–2025 RAV4: The PZK and Autorder picks fit the listed 7-inch and 8-inch displays. Neither should be presented as a fit for the redesigned 2026 model.
- 2013–2018 RAV4: Use the Focada custom base or a carefully checked universal mount. Fifth-generation screen mounts will not attach correctly.
If you prefer a mounting point that does not depend on the dashboard or vent, compare the options in our car cup holder mount guide and car dashboard mount guide.
Installation Tips
- Measure the visible screen. Check the diagonal dimension rather than relying only on the trim name.
- Test control clearance. Position the phone before fully tightening the mount so it does not cover a button or part of the touchscreen.
- Support the vent during installation. Hold the vent blade while tightening a hook-style mount and stop when the base no longer moves.
- Check the case. Thick cases and wallet cases can weaken magnetic hold and slow wireless charging.
- Recheck after the first drive. A small amount of movement is easier to correct before the mount works loose.
Frequently Asked Questions
Will a 2019–2025 RAV4 phone mount fit a 2026 RAV4?
No. The 2026 model has a redesigned dashboard and different infotainment displays. Choose a mount whose listing specifically names the 2026 RAV4 and your screen size.
Does the MOCHENT mount charge the phone?
The linked MOCHENT version is a magnetic holder, not a wireless charger. It holds compatible MagSafe phones and cases, but charging requires a separate cable.
Can I use a RAV4 phone holder with an Android phone?
Yes. Cradle-style mounts such as the Autorder, andobil, and Focada hold Android phones mechanically. A magnetic mount requires a MagSafe-compatible case or properly placed magnetic ring.
Which RAV4 mount keeps the vents clear?
The custom screen-area mounts keep the phone away from the center of the vent, although some bases brace near a vent edge. The andobil attaches directly to a vent and will reduce airflow around that vent.
Bottom Line
The MOCHENT is the best starting point for a 2026 RAV4 with the 10.5-inch screen. The PZK adds magnetic charging for compatible 2019–2025 models, while the Autorder provides a conventional cradle for the same generation. The Focada remains the custom-fit choice for 2013–2018 owners, and the andobil is the fallback when the vent geometry allows it.
Phone Mount Guides for Other Toyota Vehicles
See our guides to Toyota Tacoma phone mounts and Toyota Highlander phone mounts. You can also browse the vehicle phone mount directory.
