The Nintendo Switch was built for exactly this kind of situation: long drives, back-seat passengers with nothing to do, and parents desperately looking for anything that buys a few hours of quiet. Whether you need a dedicated headrest mount to keep the console locked in place for a kid in the back seat, or a flexible rig that works in the car and doubles as a desktop stand at the hotel, the right Nintendo Switch car mount makes a real difference on road trips. The four options below cover the main use cases without any of the janky, low-quality junk that floods this category.
| Mount | Best For | Switch Compatibility |
| Rubierine Headrest Mount | Switch-specific secure fit, road trips | Switch 1 & Switch 2 |
| Tryone Car Tablet Holder | Center-seat placement, multiple passengers | Switch 1, Switch OLED |
| Lamicall Headrest Tablet Holder | Premium build, wide headrest compatibility | Switch 1, Switch OLED |
| 2-in-1 Switch Stand and Car Mount | Travel versatility, desk and car use | Switch 1 only (not Switch 2) |
Rubierine Car Headrest Mount for Nintendo Switch
The Rubierine is the only mount on this list designed specifically around the Nintendo Switch form factor rather than adapted from a generic tablet holder. It uses a silicone net cradle that wraps around the console body, which means the Switch sits flush and secure without rattling or sliding during bumpy stretches. The cradle rotates so you can dial in the viewing angle, and the entire unit straps to a car headrest with hook-and-loop closures that require no tools and come off just as easily when you reach your destination.
The Switch-specific fit matters here. Generic tablet holders grip devices by the sides, which works fine for thicker iPads but can feel loose with the Switch’s relatively slim profile. The silicone net solves that by cradling the back of the console instead. It also means you detach the Joy-Con controllers before loading the Switch into the mount, which is the correct way to use the console in a car anyway since passengers can hold controllers independently while the screen stays fixed.
Compatibility covers both Switch 1 and the Nintendo Switch 2, which not all mounts on this list can claim. If you’ve already upgraded or are planning to, this is the pick that stays relevant going forward.
Tryone Car Tablet Holder Mount
The Tryone takes a different approach to in-car Switch mounting. Rather than attaching to a single headrest, it spans between two headrests using a telescopic aluminum rod that suspends a spring clamp in the center of the rear seat. This center-mount position means both back-seat passengers can see the screen equally well, which is a meaningful advantage when two kids are sharing a game or taking turns.
The spring clamp grips the Switch along the sides and accommodates devices from about 4.7 to 12.9 inches diagonal, which covers the Switch comfortably whether you’re running it in handheld mode or with a slim case attached. The aluminum rod is the right material choice here since plastic alternatives in this style tend to flex and vibrate noticeably at highway speeds. The Tryone holds steady.
One practical note: the headrest hooks require a minimum spacing of about 18.9 inches between the two headrest posts, and the posts themselves need to be no wider than roughly half an inch in diameter. Most standard car front seats meet these specs, but bench-style rear seats or vehicles with unusually thick headrest hardware may not. Measure before you buy if you’re not sure.
Lamicall Car Headrest Tablet Holder
Lamicall has been making tablet car mounts longer than most brands in this space, and the quality shows. This headrest mount uses a foldable, lockable clip mechanism that grips the Switch along its edges with a friction fit that can be locked in place once you’ve found the right angle. The locking feature is worth calling out specifically because it means the console won’t drift or slowly tilt downward over the course of a long drive, which is a common complaint with cheaper spring-loaded designs.
The headrest hook system accommodates a wider range of headrest rod spacing than most competitors, covering a minimum distance of 2.8 inches between the rods up to 6.1 inches. That broader range makes the Lamicall a better fit for trucks, SUVs, and minivans where headrest geometry tends to vary more than in compact cars.
Device compatibility runs from 5.4 to 13 inches diagonal, and the clip can handle devices up to about 0.9 inches thick, which means the Switch fits with or without a slim protective case. The 360-degree rotation lets you orient the screen in landscape or portrait mode, though the Switch’s game library is almost entirely landscape, so you’ll likely set it once and leave it there.
For families doing serious road trip mileage, the Lamicall is the most polished option in this group. The build quality feels a step above the competition, and the locking clip gives it a durability advantage that matters when the mount is going in and out of a car bag every weekend.
2-in-1 Switch Stand and Car Headrest Mount
This mount solves a specific problem: what do you do with the Switch when you’re not in the car? Most headrest mounts are car-only accessories that have to come off and get stuffed in a bag the moment you check into a hotel or settle in at a relative’s house. The 2-in-1 design here combines a car headrest mount with a tabletop stand, so the same piece of hardware that holds the Switch in the back seat also props it up on a desk or nightstand when you’re off the road.
The labeled L and R arms on the car mount make installation clear and quick, and the adjustable tilt angles let you set the viewing position for either a child in a car seat or an adult passenger sitting at normal height. The tabletop stand is a simple kickstand-style design that folds flat for travel.
One critical compatibility note: this mount is designed for the original Nintendo Switch only and is not compatible with the Nintendo Switch 2. If you’re on the original hardware, it’s a genuinely useful travel accessory. If you’ve upgraded to Switch 2, look at the Rubierine or Lamicall instead.
How to Choose the Right Nintendo Switch Car Mount
The right mount depends on how many passengers are watching, which model Switch you own, and whether you need the mount to do double duty beyond the car.
For a single child in the back seat watching from behind the driver or passenger, a standard single-headrest mount like the Rubierine or Lamicall is the right call. Both attach to one headrest post and position the Switch directly in front of one seat. The Rubierine is the better pick if you own or plan to own a Switch 2. The Lamicall wins on build quality and headrest compatibility range for the original Switch and OLED model.
For two passengers sharing a screen, the Tryone’s center-span design puts the screen between both seats at roughly equal distance from each viewer. It’s not a perfect solution since one passenger will always be at a slightly better angle than the other, but it’s considerably better than trying to share a single headrest-mounted screen.
For travel that goes beyond the car, the 2-in-1 stand is worth considering if you’re frequently in situations where you need a tabletop stand at hotels, airports, or at family members’ homes. The car mount functionality is solid, and eliminating one more accessory from your bag is a real convenience benefit on extended trips.
Nintendo Switch 2 Compatibility
The Nintendo Switch 2 launched in 2025 and has slightly different dimensions than the original Switch, which affects mount compatibility. Of the four mounts reviewed here, the Rubierine is explicitly rated for Switch 2. The Tryone and Lamicall use spring clamps and side-grip mechanisms that should physically accommodate the Switch 2’s dimensions, but neither manufacturer has updated their listings to confirm Switch 2 compatibility as of this writing. The 2-in-1 stand is explicitly not compatible with Switch 2.
If you own a Switch 2 or are planning to upgrade, the Rubierine is the safe choice given its confirmed compatibility. For the others, check the current product listings for any manufacturer updates before purchasing.
Frequently Asked Questions
Can I use a tablet car mount for a Nintendo Switch?
Yes, with some caveats. The Nintendo Switch in handheld mode measures about 9.4 inches wide and 4 inches tall, which puts it in the smaller end of the tablet size range. Most tablet mounts that go down to 7 inches or less will hold the Switch, but the fit is sometimes loose since tablet mounts are typically designed for thicker, heavier devices. A mount designed specifically for the Switch, like the Rubierine, will give you a more secure hold.
Do I need to remove the Joy-Con controllers before putting the Switch in a car mount?
For most headrest mounts, yes. Mounting the Switch with Joy-Con attached makes the device significantly wider and heavier, which can strain side-grip clamps and affect balance. Detaching the Joy-Con before loading the console into the mount is the recommended approach for any of the products listed here.
Will a Nintendo Switch car mount work in an airplane?
The headrest mounts on this list are designed for standard car headrests and will work on most airline seat headrests as well, since the hook-and-strap designs are agnostic to headrest type. The Rubierine specifically lists airplane use in its product description. The Tryone’s center-span design requires two headrests spaced at a specific distance, which makes it less practical for airline seats.
What is the best Nintendo Switch mount for keeping kids entertained on long drives?
For a single child, the Rubierine gives the most secure and Switch-specific fit. For two children sharing a screen, the Tryone’s center-mount position between both front seats is the better option. For families that want a mount that also works as a tabletop stand at stops along the way, the 2-in-1 stand covers both needs, though it is limited to the original Switch.
Can these mounts handle the Switch OLED model?
The Tryone and Lamicall accommodate devices up to 12.9 inches and use side-grip or spring-clamp mechanisms that handle the Switch OLED without issue. The Switch OLED has a slightly larger 7-inch screen but the same Joy-Con width as the original Switch. The Rubierine lists compatibility with Switch 1 and Switch 2 but does not specifically call out the OLED model. Check the current listing before ordering if the OLED is your primary console.
More MountGuys Guides
If you found this guide useful, these related articles might also help with your setup:
