Car and Motorcycle Mounts for the Apple iPhone 6 and Apple iPhone 6 Plus

Car and Motorcycle Mounts for the Apple iPhone 6 and Apple iPhone 6 PlusiPhone bigger and better.  At least that’s what Apple calls it.  Recently made available, this is the most popular release to date of a new Apple iPhone.  It’s understandable, especially for those not already owning a more current phone.  The performance and functionality improvements introduced with the new phone as well as the new operating system (IOS release 8) are significant.  This is a site that focuses on the stuff needed to make your devices mobile, so if you want to read about some of the enhancements, take a few minutes to view it at Apple.

We would be remiss without mentioning one very important sets of features on the new iPhone 6 which is called iSight and Auto Image Stabilization.  This combines some new hardware and software enhancements that will permit you to shoot photos and videos that aren’t as prone to a shaky hand nor as susceptible to a vibrating vehicle.  This expands the potential of using your iPhone 6 for use as a dash camera or possibly for use on a motorcycle.  If you choose to do this, make sure the mount that you purchase leave the rear camera lens uncovered.

When it comes to mounting this phone, it’s important to know the dimensions of these devices.  The iPhone 6 is larger than any model announced to date.  With a 4.7 inch diagonal screen this phone is 5.44 inches tall by 2.64 inches wide by .27 inches deep.  The larger iPhone 6 Plus is even larger.  Sporting a 5.5 inch diagonal screen, this iPhone is 6.22 inches tall, 3.06 inches wide and .28 inches deep.  These are important measurements to keep in mind when selecting your mount.  For those with any custom iPhone mount which features a cradle specifically made for your iPhone, they aren’t going to fit and you will need to purchase a new mount, or at least a new cradle.  For those that have purchased a universal mount to hold your older phone, hopefully it opens wide enough to hold your new iPhone 6 series without a problem.  Most universal mounts offer options to upgrade your cradle to a larger one.  From experience, I suspect you will be able to reuse your existing universal mount for an iPhone 6, but not for the iPhone 6 Plus.  The iPhone 6 Plus is a really big phone.  It was made to compete with the larger models from Samsung such as the Mega and Galaxy Note.

Readers of our site already know that we favor the universal mounts because of the reasons just mentioned.  So for those that never had a phone mount before, avoid the custom solutions and purchase a solid universal mount.

There are a lot of companies that offer some excellent mounting solutions for the iPhone 6 and iPhone 6 Plus.

Arkon, based in California, offers three inexpensive lines that fit all iPhone 6 models with or without a case.  Their Mobile-Grip 2 cradles were recently introduced.  Mobile-Grip 2 features an expandable cradle that grips your phone from the sides.  The cradle opens to 3.6 inches wide so should be large enough for almost all cases although you might struggle a bit with a thick case on an iPhone 6 Plus.  Arkon also offers an older line called Slim-Grip Ultra which opens to over 7 inches.  The Slim-Grip Ultra will hold your phone from the top and bottom and features support legs that can move from side to side.  Lastly, the MegaGrip cradle opens to 3.4 inches.  The MegaGrip has been around for many years and is extremely reliable.  The MegaGrip features one hand operation and opens with the push of a button.  Arkon does not offer a custom cradle for any of the iPhone 6 models.

The photo that accompanies this article is the Arkon MegaGrip Suction Cup Windshield and Dash Mount.  This line is inexpensive and proven.  You can use it reliably on your car dash or windshield and it fits your iPhone 6 with or without a case.   The mount features a vacuum locked suction assembly attached to a pivoting arm.  The cradle opens and closes at a push of a button and expands up to 3.4 inches so it will fit the iPhone 6 even with a case and an iPhone 6 Plus a case or skin.  The phone can swivel into any orientation.  The mount also comes with an adhesive disk that you can stick to the dash to turn the mount into a console mount.  The suction assembly can adhere to the adhesive disk just like it would on a windshield.  A photo of this mount in the dashboard configuration accompanies this article.  I have used these for a long time and can vouch for the ease of use and durability.  Might be the best phone mount you can get for the price.

Featuring the just mentioned MegaGrip cradle, consider the Arkon Car Air Vent Megagrip Mount.  The included cradle opens to 3.4 inches which is large enough for either phone with or without a case.  The arms hold securely onto most vertical vents and can be removed.  The expandable cradle opens with a push of a button on the side.  The phone rotates into portrait or landscape.  This comes with a 2-year warranty.

RAM Mount, out of Washington, features two custom cradles.  The RAM Model Specific Form-Fitted Cradle for the Apple iPhone 6 is made to fit the iPhone 6 and the RAM Model Specific Form-Fitted Cradle for the Apple iPhone 6 Plus will fit the iPhone 6 Plus.  Since it’s a custom cradle, these will not fit your device with a case or skin.  You can couple these with one of RAM’s mounting pedestals for the windshield, cup holder, dash or motorcycle.  RAM also makes their ever popular X-Grip cradle, the RAM-HOL-UN7BU for the 6 and RAM-HOL-UN10BU for the 6 Plus.  These universal cradles will open to grip your phone from the sides with or without a case or skin in use.  Although the custom cradles are well made, we prefer the X-Grip universal cradles.  It’s likely you will have a case or skin on your phone so go with the universal cradles.  We do a deep dive on the X-Grip series which is worth reading here.

If you are looking to use your iPhone 6 or iPhone 6 Plus on a motorcycle, consider the RAM X-Grip line.  These are heavy duty mounts that are mostly constructed of metal.  The mount has gone through some rigorous shake tests and holds up well on a motorcycle.  We wrote about X-Grips extensively on this site and you can view that article here.  The mount that you would use for the iPhone 6 is the RAM Handlebar Mount with Universal X-Grip Holder.  The iPhone 6 Plus needs a larger cradle so you would select the RAM Handlebar Mount with Universal X-Grip IV Holder.